Established for over 37 years, Venhill manufacture and supply high quality low friction control cables, hydraulic hoses and controls for motorcycle, kart, leisure and industrial applications. Venhill supply their products through specialist distributors throughout the world.
Venhill Powerhose braided stainless steel hydraulic hoses provide high performance, easy fit and durability. They are constructed using quality components. Hoses are manufactured from chemical and heat resistant smooth bore PTFE hose with a stainless steel over braid and stainless end fittings. The Powerhose Plus system utilizes 1/8th BSP threaded swivel sockets on the ends of each hose and threaded fittings. This allows the hoses to be completely stress free when fitted to the bike.
Hose kits are available in the standard manufacturers configuration where possible and two hose conversions are offered where the manufacturers configuration could not be followed.
-ROAD BIKE KITS - complete hose kits for the more popular road bikes. The individual kits comprise of all the hoses, banjos and fittings for a particular make and model of machine. All the components are brought together under just one part number.
-FACTORY TESTED hoses are your guarantee of safety and peace of mind. Each hose is a manufactured part which is then gas pressure tested to 1500psi (110 BAR) in the Dorking factory. This unique testing procedure means that the hose you have purchased (or are considering purchasing) has been made to - and achieved the highest possible standard before exporting to distributor around the world.
Venhill extend their quality of brake hoses and products on the 2009 range in DOT and TUV Certified. Every 30 days, a random test on hoses are being pressurized to 10,000psi. For your information, your brakes are operating at around 25-30psi even under hard braking.
Made in UK
3 Lines Kit -SGD$180 DIY
3 Lines Kit -SGD$230 with installation
Currently available instock colors are Smoke/Blue/Red lines.







Reply With Quote






