Some may not know about this product that has been copied over and over and over again with lots of different name.. Power booster, spark booster, spark optimizer, power abuser ignite, acceleration booster with a price tag from spark optimizer 120 to the famous pa ignite 230 bucks.. Some claim their ""breaking technology"" from germany, italy or uk with patent pending.. forever waiting pending for patent that cannot be patent anymore.. To show customer that is a new technology in the market that has already exist ages ago.. If you dont wanna spend money on costly ready made power booster, here is my diy that cost around 10 bucks...
The main component of the device is the capacitor itself.. About 2 bucks..
I had a 10000uf lying around but a 4700uf capacitor is enough.. Seen some using a 6800uf..
Pnp type transistor to-220, MBR1560CT, around 3 bucks
Not sure whats the use, ampifly?? Hahas..
Barrier diode 1N5822, 1 bucky
Pcb Board, 1 buck buck
To make everything looks cleaner rather than standard spark booster trying to save cost by soldering everything to the wire..
You need some connectors and good thick wires(please dont use normal skinny wires) as well as some time to solder everything together..
Solder them all together according to this schematic.. You dont really need the led and resistor.. purely comestic.. Doesnt gain any hp..
Didnt have time to really take picture of the whole process.. Very busy person with lots of project.. So these are the few pics..
And this is the finished product
Next just find a small hobby box to hide it.. Most of the device is dip into resin and wrapped just like that.. Cut cost... Everything also cut cost when the cost is less than 10 percent of the selling price.. The other advantage of their black resin, customer cant take the device apart to see what german cheese technology used inside other than a simple stuff that cost less than 10 bucks..
For those who wonders, my green is my ground, brown input and the blue output..
You will need to look for the 12v supply to your ignition coil.. Doesnt do anything for cdi application.. Some is easily disconnected and some you have to cut the wire in order to install.. Once you cut or disconnect the wire connecting the 12v supply and the coil, the blue wire (output) will connect to the wire at the coil, brown wire(input) to the 12v supply wire.. Green?? Just ground it.. Its just connecting the wires in between the wire you just cut or what people say connecting it in series..
Tried on my car, my two friends car, my bike and my test vehicle, cant really feel anything.. So youre saying my device dont work?? I do own a couple of spark booster including the famous and the most expensive one.. Same device.. Same result... Wonder how a same stuff can produce different result.. Wonder whats the result on a dyno..
Anyway, i have lots of diy to share including my diy chain oiler with fully adjustable 555 timer for drip duration, drip interval wired to solenoid pump(not those windscreen washer pump).. Im using soap pump.. Tiny motor.. If i have time.. I will post all my diy up.. Thanks for taking time to read my diy thread..