PDA

View Full Version : [Group] SBF Suzuki Raider



Pages : 1 2 3 4 [5] 6

Yzx
08-07-2012, 01:06 PM
NO 1 have it ? :cry:

Going Batam next wednesday. hope I can find the place .

gunshead
22-07-2012, 12:30 AM
mel me
gunshead yahoo com

i will provide the name, contact number , address

gunshead
07-09-2012, 08:00 AM
bike still running fine

next maintenance will be after 5,000km

changing air filter

Yzx
08-09-2012, 07:02 PM
Have brought many spare parts.

Thinking of changing the clutch DIY.

gunshead
14-09-2012, 08:24 AM
yzv

share your experience in batam purchasing raider parts

where did u get it

i perhaps 4th week sept going there

gunshead
16-09-2012, 11:14 AM
going to send bike for washing and polishing.

Yzx
20-09-2012, 01:36 AM
I have bought some parts to standby. like clutch cable and throttle cable.

But some other part i have to order and wait for the stock.

Yzx
20-09-2012, 01:45 AM
I suppose you have order your parts .

What you write in bahasa?

I see they all can't really understand much in english.

Yzx
20-09-2012, 01:46 AM
I suppose you have order your parts .

What you write in bahasa?

I see they all can't really understand much in english.

marry
22-09-2012, 06:33 PM
Hello guys, What a amazing bike it is ! I really enjoy Suzuki riding with my Friends ..
one of my friend want to buy its latest model can anyone would like to give any suggestion about it.
...............................................
SPORTS EQUIPMENT (http://http://www.oneclicksports.co.uk/)

gunshead
08-10-2012, 10:16 AM
yzx

u never tell me which shop u went in batam
the place i went they spoke good english
i only use english

i am going again this week

gunshead
08-10-2012, 10:19 AM
Suzuki FU 150 Raider R
18/9/2012
meter 72375

Down at home
Cannot start

Root cause : petrol not flowing into

changed

Diagphram
NGK G-power sprak plug

Fuel cock assy
petrol filter

Battery caj
Full pump tyre air pressure
Chain tighten
Engine oil shell 10w-40 + oil filter

All genuine Suzuki parts

gunshead
28-10-2012, 02:04 PM
washed

polished SOFT 99 metalik

gunshead
11-11-2012, 02:59 PM
Suzuki Raider R 150
7 Nov 2012
Meter 72923 km
Suzuki SC JB

Timing Chain 1276025G01000
Timing chain sprocket 1 pair 12741B25G00N000
Adjuster Tensioner ASSY - NEW DESIGN 12830B25G20N000 RM82.70
Cam chain guide 1 -1277125G00-000
Cam chain Guide 2 - NEW DESIGN 1281125G10-000 RM 22.00
Gasket Ring cylinder head cover 11173B47E10N000
Gasket magneto cover 11483B25G10N000

Shell Advance Semi-synthetic engine oil RM29

accessory
Guard protector oil cool RM20

Labour Suzuki RM45

gunshead
29-11-2012, 09:45 AM
pictures for the above repairs and some spare parts for future use

gunshead
29-11-2012, 09:51 AM
continue more pictures
pictures for the above repairs and some spare parts for future use

gunshead
29-11-2012, 10:11 AM
mo mor more

genyang
05-12-2012, 02:37 AM
i need some info regarding getting parts from batam.. on the road i heard 1 belang rider told me that his fren went batam and get a full set perfomance parts cost less than 1k... he said perfomance was great.. krr150 cant be par with him... i wan to try

gunshead
07-12-2012, 11:41 AM
i just returned batam with shopping suzuki genuine parts

gunshead
07-12-2012, 11:42 AM
PERFORMANCE CONTACT TDR JAKARTA
WILL TELL U WHERE TO GET IN BATAM


TDR RACING INTERNATIONAL
LODAN CENTER BLOK G No.2
Jl. Lodan Raya No.2
Jakarta Utara 14430 -INDONESIA
Telp. :+62-21-693 0777 (Hunting)
Fax. :+62-21-691 6568
WEB : www.tdr-racing.com
Facebook : TDR RACING INTERNATIONAL
email: support@tdr-racing.com

Spare Parts Division
PT. Indomobil Suzuki International
Spare Parts Directorate
Jl. Diponegoro KM 38,2
Tambun - Bekasi 17510
Telp : + 62 - 21 8809940,
+ 62 - 21 8809941 ext 206
+ 62 - 21 8809488 (direct)
Fax : + 62 - 21 8809950
email : budi.cahyaningsihsuzuki.co.id


GENUINE SUZUKI PARTS
GO HERE

BATAM

Suzuki Dealer (Distributor) in Batam
Rodamas Makmur Motor, pt.
Jl. Yos Sudarso, Sei Baloi





I ORDER PERFORMANCE PARTS FROM
one shop in KINTAMANI, batam

he good service can order things then will sms singapore once arrived.
can speak mandarin
+62 81270290882

gunshead
09-12-2012, 05:04 PM
this cover for oil cool is nice
JB service centre
I have fixed

RM 20 free fixing
got other colors too

blue, red, silver,

gunshead
09-12-2012, 05:12 PM
tis key genuine suzuki
bought in Batam while shopping at suzuki center

made for bikes suzuki

SGD 1.50 only

genyang
13-12-2012, 12:00 AM
thanks bro gunshead .. but unfortunately i think i cant try those performance part any more.. my toys was stolen.. less than 10 minutes time ...vanished. JB really scary.. u guys take care if coming here.

gunshead
15-12-2012, 02:42 AM
u mean Raider 150 u lost in JB ?

genyang
16-12-2012, 02:21 AM
yeap..stolen.. juz bought another toy that quite similiar,,,duke 200... nice ride.. but i still prefer my raider.. so small easy go tru anywhere..duke too big.. havent get used

Roszaidee
20-02-2013, 07:22 PM
Hey raider riders. I'm riding a raider too. I wanna know if there is a way to reset the millage? Cause my is 9999999 already. Haha. And where do all of you buy raider spare parts? Thanks.

gunshead
02-05-2013, 05:07 PM
u called me today
that 99,999 problem i not sure belang has the same issue
belang CDI is different

maybe u can ask suzuki msia

let me know too

gunshead
11-06-2013, 03:10 AM
changed
air filter
ngk - g power
oil filter with shell advance semi synthetic oil

sprayed hi-temp exhaust spray

gunshead
16-06-2013, 07:45 AM
now machine scored 80,000km

yesterday wash and polished

Mangojuice
20-06-2013, 09:13 AM
Hi peps

still any kakis riding raider? i just got my raider from a fren, however got issues, keeps stalling at traffic lights, rpm not constant,
change carb, spark plug cap and spark coil, still same, got any ideas? and got lobang for suzuki agent in jb or singapore except KS motors and Guan Hoe?

bbpearl
20-06-2013, 03:59 PM
hi gunshead

Except Batam, can we purchase raider 150 genuine parts from other provinces of Indonesia since I could not book a ticket for Batam? I like to buy this set:
280963

Anyone have any ideas where to get this primary gears
Thanks

Mangojuice
20-06-2013, 08:35 PM
Correct me if im wrong, that big item u highlight is clucth housing? Most issue is the 3 rivet connecting housing n n gear are worn out, u can get it be rivet back, no ned to buy new one, for the.small gear mayb jb haf

Mangojuice
20-06-2013, 08:43 PM
Btw i did went down to.buy parts frm guan hoe, yesterday, n the malay guy at the counter told.me, can order parts frm jb shop, ori parts, suzuki agent, ntp something the shop name, he told me about location of shop but i forgot liow, i try search, i will put the add once i got.it

gunshead
25-06-2013, 07:44 PM
go to
www.suzuki.com.my
and buy from there
original suzuki and cheap
suzuki serice center
get it tere
price is factory price
cheap

also i buy from suzuki SIS batam only
cheap cause direct from jakarta

no middle man involved

both above no middle man
so cheap

email me more to ask

gunshead yaho com

gunshead
25-06-2013, 07:53 PM
just go to suzuki service centre
look or mr. asnul

johor baru

setia tropika

www.suzuki.com.my

get the map and adrress and contact number there

they open sharp 8am till 4:45pm

Mangojuice
26-06-2013, 04:31 PM
Am wondering if theres still kakis riding raider... Maybe someone willing to organize field trip to buy parts at the shop that gunshead mentioned. am not familiar with jb area

gunshead
26-06-2013, 11:00 PM
come to jb and I bring you to skudai my dearest mechanic and to setia tropika suzuki service center
also next time i go Batam follow me to SIS IndoMobil suzuki SC

gunshead
26-06-2013, 11:08 PM
Suzuki Raider R 150

26 June 2013

Meter : 80477km

1. changed horn. Old was NOT very loud. Changed to NIKKO brand genuine Yamaha.
checked socket – ok

2. Fuel Cork has problem . Petrol cannot stop automatically. Inside tiny valve malfunction. Changed fuel cork TAIYO GIKEN brand genuine Suzuki . Used Suzuki Smash FD110 model. Tested perfect

3. Changed 1100ml Shell Advance semi synthetic engine oil

4. Changed oil filter genuine Suzuki FU 150

5. checked petrol filter - OK. Super clean. Thanks to Caltex techron RON 95

Mangojuice
26-06-2013, 11:22 PM
Oo power ley bro, jb so far i go.gelang patah n.nusa idaman area, ur jb which area bro? Mayb can.meet then can follow u go see ur mechanic n parts shop.

gunshead
28-06-2013, 09:35 AM
do your homework. all pages before this has so many contcts and address. just copy to gps and go . i have wrote in depth all info. refer all pages this thread

gunshead
18-07-2013, 12:14 PM
bike power still good

thanks to caltex ron 95

gunshead
18-07-2013, 03:47 PM
just fixed on my another suzuki bike

seat cover netting type

very cooling while riding
and comfortable

RM 15

gunshead
22-07-2013, 07:33 PM
today i got to know the best quality material is made in Vietnam
kuda cap
so i fixed this kuda cap black color on my FU 150 Raider R
RM 25

very cooling
dem syok

after comparing seating on net - netting kuda cap made in vietnam more rigid and solid

gunshead
25-07-2013, 10:16 AM
going batam for shopping suzuki

Mangojuice
25-07-2013, 02:42 PM
Haiz.. how i wish i can go to Batam.. but canot for now, not feasible as fasting month and also busy with work projects.. going to do top overhaul for my raider as per advice by two mechanics, might be getting parts frm JB, buy bit by bit cost budget tight tight..

gunshead
26-07-2013, 01:28 PM
mango
just bring to setia tropika
let enginner there see first
those are FU 150 satria / belang / raider specialist

also now got new design japanese tensioner with cam guide

maybe that can solve your problem

www.suzuki.com.my
see the address for JB service centre

Mangojuice
26-07-2013, 04:11 PM
Ahh.. kk Thanks Gun.. will go there n do as per your advice. $$$!

gunshead
31-07-2013, 09:58 PM
i ordered key chain suzuki
need one for my other bike suzuki

gunshead
01-08-2013, 10:26 PM
28 july 2013
meter 81200km

changed fuel cap lid

use indonesian made year 2012 ( batch written on box )

feature :-
big cap lid
thick rubber
both side rubber has similar surface
rubber steady
big rubber size

RM11 made in indonesia but last part no. has AS01 instead of L000
part # with AS01 is the best solution

check !!!

The small hole inside cap must be sprayed WD-40 and blowed with air pressure to remove white powder and rusts.

tested full " mouth full " tank petrol fill up
NO more leakage.

Last time got leakage petrol once mouth full pump in petrol cause the rubber cap fuel not good - design flaw

gunshead
01-08-2013, 10:49 PM
1 aug 2013
meter 81407km

PAIR got 2 hose - 1 is thin and 1 more fat
the thin hose connected from PAIR had crack and causes air leakage. Bike will not have high power after 75km/h

So rather then buy original part since knowing it is thin - this hose in part catalogue = HOSE, 2ND AIR CLEANER JOINT 09359-40701-600

I used
thick , anti-crack , long life, anti-bend petrol hose - highest quality RM 12

Now bike has good vacuum system.

Bike with 81,410km mileage gives superb accelaration and high speed

AMAZING !!!! medical miracle real adrenalin rush

Mangojuice
02-08-2013, 03:07 PM
OO i think i should check on this hose also, just to be sure, my bike needs to be check all over cos bike pass to me. COI left 2 months, just riding it for 3months, Bro Gun u give many gd tips, bravo!!

Mangojuice
03-08-2013, 02:49 PM
Bro Gun, do no if u can help me or not, yesterday go bikeshop in JB nusa idaman area to check on timing chain, mechanic open n guess wat, the camshaft housing is broken! cialat, he told me dono if can get the part, i did a quick check on part manual, n... no part number! today (sat) 8am sharp call suzuki assembler (setia tropika) sadly no answer, call later again no answer, maybe closed on sat, no choice, went back to bike shop, mechanic say no choice, temp put back broken camshaft housing, ned to quickly find replacement part, i don think i want to ride it to work on mon. Am wondering if Bro Gun can ask your bike shop if he have spare which i can buy. pls help :)

284892284893

gunshead
03-08-2013, 03:42 PM
saturday suzuki closed in setia tropika

see my list page 17 behind
I listed out singapore contacts where u can get parts like cheong aik , ghc, etc

otherwise monday u take leave

8am sharp be in setia tropika suzuki

u try calling one by one in singapore for parts, finally

suzuki JB if don have still can courier from factory in penang for you

meantime

tomolo sunday really no choice for u

wait monday or else long leave hari raya

actually i don know why u give DOHC engine to open by mechanic outside when they never keep parts for DOHC engine

gunshead
03-08-2013, 03:43 PM
so guilty

how to help u when this will be long leave holidays

my mechanic I don think he has.

This kind of things he will call around spare part delaers and ask who has it

in paRT CATALOGUE THIS ONE GOT sell separately



timing chain there is no such thng as open the head and check inside

they check through tensioner



suzuki centre has all parts solution for timing chain'
tensioner
cam guide
2 sprockets for timing chain - MUST CHANGE together

now i am in cyber cafe not at home

cannot really let u know the part number u need to change now


owning DOHC engine is always troublesm not only in msia , spore , indon , siam even in japan people cry for spare parts

gunshead
03-08-2013, 04:22 PM
i am seeing the catalogue now

u r right

they never sell individual

it come set

HEAD ASSY, CYLINDER part 11100-25G00-0T0

i think can cost easily SGD 400 I am not shocked

but don worry

I suppose it can be welded using tembaga welding

Maybe you bring to bike shop not suzuki and ask them if it can be tembaga welded

for sure it can cause sometimes people welding tembaga for crankshaft

do this one surely can too

you can go to
10AM
seng hoe motor
jalan barau
skudai

but better ask or call suzuki and ask for advise

see they may keep the item separately

do your homework

gunshead
03-08-2013, 04:27 PM
11100-25G00-0T0 HEAD, ASSY CYLINDER

i checked indonesia price it is SGD224
I doubt spore or msia will be this price
maybe SGD 300 -400
one complete set

DO THESE

1. print out the photos u have
2. print out the part catolgue cylinder head

with these at least people know what you talking rather then keep opening the cylinder.

maybe the special welding can help you solve

next time make sure you use good semi-synthetic oil and also change frequent oil filter

i suppose this happen cause overheat engine - lack of oil and over due oil change

Mangojuice
03-08-2013, 05:20 PM
Thanks bro gun, no ned feel guilty canot.help, appreciate the tips n information u give, mayb mon i mia frm work n.check at.setia tropika, never tot of welding it, mayb can but material is like cast aluminium, mayb i go ask ard, thanks again bro gun for the assistance:)

gunshead
08-08-2013, 01:04 AM
[QUOTE=dragsterwish;6718698]Upkeeping of my bike for your reference:

1) Finally solved my fluctuating speedometer reading problem

Culprit?? The chipped off speedometer rotor! Its a small ring located behind the speedometer sensor housing near the left foot rest. (black cover). Replacement cost about $28. Now speed reading is correct! And i realised that i've been travelling quite FAST in the past! haha....




i was reading back what dragster did to his bike on page 17

the portion above " small ring " I could not find in the part catalogue. Do not know which he is pointing. I suspect the o-ring behind speedometer gear. This o-ring is expensive.

part catalogue Fig 19 Gear Shifting
09280-26007 O-Ring, D:2.4, ID : 25.7
or
37722-25G00 O-ring. D:2.4, ID: 26.2

gunshead
11-08-2013, 01:08 PM
Bought LED bLUE BULB
Setia Indah, JB
RM7
12v dc
brand : Racing Bee


bought 2nd tailight for extra security
SGD 15
ah boy

gunshead
14-08-2013, 09:28 PM
fixed
chain tensioner adjuster
this one connected to sub rear wheel rather then swingarm
this brand is good SRK-group.com
made in thailand

RM25

One thing we need to wd-40 the spring and mechanical movement of the auto chain tensioner
otherwise we hear squeeking noise

after wd-40 NO noise

bike anytime power and acceleration

chain never loose

good for overtaking lorry at trunk road

gunshead
19-08-2013, 09:27 AM
mango
how ur bike now?

gunshead
27-08-2013, 08:04 AM
bike running at 82,100km

once 100,000km will see the odometer spins to 00000

heard this model Raider R , it never spins

hmmm

if that case buy another meter from Batam

but some said in Singapore people can reset the electronics for $50

Mangojuice
27-08-2013, 12:22 PM
Still the same ah bro, no ride slow like turtle only, parts havent change. busy currently cannot take leave, so far so gd, only backfire, idling stable already, the other day change the 2 valve intake cos wear n valve oil seal (ori belang parts), piston rings, engine perform better. As for meter reset mine is 9999999999, i also wan to reset, my guess is urs will be the same, stuck at 99999999, i ever read on net, they ned a device to reset the meter, like a computer device, i think like this video http://www.youtube.com/watch?gl=SG&hl=en-GB&v=lI9BU9DEsH8, if you can find kangtao do reset let me know i also wan to reset mine.

gunshead
04-09-2013, 10:37 PM
Raider R
30/8/13
Meter : 83131 km

don use NTN suspect fake item

front wheel bearing
use KOYO
covered seal
made in Japan

total RM24

gunshead
14-09-2013, 11:05 PM
overhaul front brake caliper

changed rear brake caliper fluid

will write more later

gunshead
18-09-2013, 08:30 PM
Suzuki Raider R
meter 83163km
10/9/2013

1. Full overhaul front disc caliper. Changed
RG110 normal seal kit.
BOOT B
BOOT PUSH

2. changed rear / front caliper brake fluid DOT 4 Mobil

In future
For overhaul caliper disc must change one set

FRONT CALIPER
59303B14500N 1 BOOT B
59386B13A00N 1 BOOT PUSH
59300-13820L 1 SEAL SET PISTON
59382B13A00N 1 PIN BOLT
59387B00B20N 1 PIN
59100B25810N 1 PAD SET NON ASBESTOS

REAR CALIPER
59303B14500N 1 BOOT B
59387B00B20N 1 PIN
59100B38860N 1 SEAL SET PISTON
59386B13A00N 1 BOOT PUSH
59382B13A00N 1 PIN BOLT
69100B20840N 1 PAD SET (N ABS)


Brake fluid DOT 4 MOBIL only

gunshead
28-09-2013, 11:40 AM
27 sept 2013
83442 km

changed
air valve reed PAIR
ngk g-power platinum
HDEO new shell R4 X rimula

today I went to shell kiosk and found 1 liter new shell R4 X Rimula been sold
bottle shows packing July 2013 RM 15.60

it is new upgrade from R3 X rimula

then tested new engine oil to Gelang Patah for makan and return via Mutiara Rini
engine quiet and high revvingat little throttle open

will buy 5 liter packing once shell kiosk start to sell

gunshead
08-10-2013, 11:45 PM
tensioner adjusted
adjust the thick spring inside tensioner
tighten it

8/10/13
84274km

gunshead
08-10-2013, 11:46 PM
8/10/13
found fork oil seal RHS leaking

ordered oil seal fork
waiting arrival 3 days

caswell87
19-10-2013, 09:44 PM
Hye, im new here.. from SBRM (Suzuki Belang R150 Malaysia)...

caswell87
22-10-2013, 07:19 PM
Still the same ah bro, no ride slow like turtle only, parts havent change. busy currently cannot take leave, so far so gd, only backfire, idling stable already, the other day change the 2 valve intake cos wear n valve oil seal (ori belang parts), piston rings, engine perform better. As for meter reset mine is 9999999999, i also wan to reset, my guess is urs will be the same, stuck at 99999999, i ever read on net, they ned a device to reset the meter, like a computer device, i think like this video http://www.youtube.com/watch?gl=SG&hl=en-GB&v=lI9BU9DEsH8, if you can find kangtao do reset let me know i also wan to reset mine.
for belang it still continue, no need to reset.. now mine is 120k mileage..

Mangojuice
28-10-2013, 05:51 PM
Gd to know Belang Meter will continue, my raider r wont continue, very degil wan. Mayb i will invest in belang meter, when i save enuh $$. By any chance u guys know belang exhaust pipe cost how much? new and secondhand price?

gunshead
29-10-2013, 01:54 AM
25 oct 2013

meter 845xx

bought genuine fork oil seal
per piece RM 13

fixed skudai
labour RM10

changed fork oil 15W ELF

gunshead
15-11-2013, 10:08 AM
SINNOB sprocket chain set 7 May 2012 Meter 67966km lasts till 14 Nov 2013 84739km = 16773km

On 14 Nov 2013 red sinnob sprocket chain set meter 84739km

skudai fix 84739km 14 Nov 2013

1. changed front disc brake. replaced genuine NISIN non asbestos to OEM suzuki disc pad. Cause Nisin gave noise while spinning.
2. fixed sinnob

Labour and disc pad = RM 35

gunshead
15-11-2013, 10:12 AM
continue from above

gunshead
26-11-2013, 11:04 PM
thanks to caltex techron ron 95
bike running fine till now

gunshead
13-12-2013, 09:24 AM
Michelin Pilot Street 80/90-17
meter 85633
11/12/13
RM95 setia indah fixed labour RM5 skudai

gunshead
14-12-2013, 09:23 AM
i like this net seat
made in vietnam
thick and strong

good ventilation for water and air

RM 22 L size fix in shop
or just buy in spare part shop RM18

see for horse cop
cap kuda

gunshead
18-12-2013, 08:57 PM
replaced rear brake switch and rear bulb

18 december 2013

take note - suzuki lights very sensitive
if bulb is getting dimmer and filament not strong we get
symptom

front brake lever when pressed , rear light never falsh/brighten
rear brake lever stepped , rear light never flash/brighten

after changing the rear bulb everything OK

also i changed rear brake switch just in case cause mine slightly not nice

replaced rear brake switch and rear bulb

RM 9.50

gunshead
19-12-2013, 11:07 PM
just bought LUCAS synthetic fork oil
courier service from KL to JB
10W medium weight

http://www.lucasoil-my.com/p_motorcycle_oil.html

Alerionic_Aziz
23-12-2013, 02:50 AM
Very good.

gunshead
23-12-2013, 08:20 PM
will be buying / ordering more two items from LUCAS oil Msia

http://www.lucasoil-my.com/p_motorcycle_oil.html

1. Slick Mist Tire & Trim
2. DOT 4 brake fluid

gunshead
26-12-2013, 06:39 PM
25 dec 13
skudai
meter 86475

1. symptom rear wheel and chain drive noisy but rear wheel never wobble or shaking. So alligned the chain drive and front sprocket but still noisy. Removed wheel and checked the bearing. Confirmed ball bearing loosen and side wall torn. But amazingly it never make wheel shake or wobble. Changed bearing to KOYO made in Japan both side covered type. Last time used NTN made in japan suspect NTN was imitation /fake item as largely can be found in JB. So used KOYO which is genuine imported. RM14

2. had tuck tuck noise from front wheel fork system. Tighten all nuts/bolts and adjusted to factory setting handle bar steering stem and tighthen to correct measurement.

Now all noises GONE

gunshead
30-12-2013, 01:14 AM
continue above.. see two more photos


now for GREASE


many of us ignore greasing parts
bikes need greasing done 16,000km on chasis and some other areas

cvt scooters need greasing done 8,000km

i suggest buy one tube or one pack marine grease. Is the best grease and has highest of all criterias

read more on grease

http://www.etrailer.com/faq-grease.aspx

to test grease. Take a spoon of grease and put naked fire via lighter. if it melts then this is fake grease. Good grease will not melt.

for msia we still can use penzoil
Pennzoil® Premium Wheel Bearing 707L Red GreaseA premium high-performance grease providing excellent high-temperature protection and resistance to water washout, and with extreme-pressure properties. Pennzoil® Premium Wheel Bearing 707L Red Grease is formulated with a high dropping point, is an excellent lubricant for vehicles with disc brake and ABS systems, and is ideal for chassis lubrication. Premium red color

gunshead
09-01-2014, 04:52 PM
i just bought bulb bolham stanley
oiginal suzuki 32W and 18W for raider R
for spare and future use in case bulb get dark

gunshead
09-01-2014, 04:55 PM
bought leather key chain

gunshead
09-01-2014, 04:58 PM
correct timing for 'air' tuning is set to factory
i have posted this before
but for those u need to refresh mind and refresh setting
see pic

gunshead
16-01-2014, 12:04 AM
to me this is the best chain lubricant
SGD 11

gunshead
19-01-2014, 12:10 PM
I bought this it is GC-LB highest spec and best in grease for wheel bearing, chasis and disc brakes
Pennzoil 707L premium red grease
SGD 12 Rangoon rd




now for GREASE


many of us ignore greasing parts
bikes need greasing done 16,000km on chasis and some other areas

cvt scooters need greasing done 8,000km

i suggest buy one tube or one pack marine grease. Is the best grease and has highest of all criterias

read more on grease

http://www.etrailer.com/faq-grease.aspx

to test grease. Take a spoon of grease and put naked fire via lighter. if it melts then this is fake grease. Good grease will not melt.

for msia we still can use penzoil
Pennzoil® Premium Wheel Bearing 707L Red GreaseA premium high-performance grease providing excellent high-temperature protection and resistance to water washout, and with extreme-pressure properties. Pennzoil® Premium Wheel Bearing 707L Red Grease is formulated with a high dropping point, is an excellent lubricant for vehicles with disc brake and ABS systems, and is ideal for chassis lubrication. Premium red color

gunshead
19-01-2014, 12:26 PM
went shopping bought some spare parts
also
ordered and bought some spare parts
for future use long run purpose

see pictures

gunshead
19-01-2014, 12:32 PM
went shopping bought some spare parts
also
ordered and bought some spare parts
for future use long run purpose

see pictures

gunshead
19-01-2014, 12:34 PM
bike ok condition

need to send for wash and polish / wax

gunshead
21-01-2014, 07:49 PM
take note guys

fork oils have 4 years shelf life span

so better mark your bottle

also take note of factory packaging date

like mine was - The product have a code date.. and yes they have a shelf life of about 4 years.. Looking at this code, this one was made in May 8 of 2013..



just bought LUCAS synthetic fork oil
courier service from KL to JB
10W medium weight

http://www.lucasoil-my.com/p_motorcycle_oil.html

gunshead
07-02-2014, 05:39 PM
ordered genuine suzuki FU 150 DOME stickers.

gunshead
18-02-2014, 09:31 PM
88153km
14/2/14

skudai, JB

changed 2 disc brake brake fluid DOT 4 Mobil
service front disc caliper and put pennzoil red grease 707L
ngk G-Power
air filter
oil filter with two O-ring
shell r4 engine oil
fork oil LUCAS synthetic 10W

total service RM26

gunshead
24-03-2014, 07:41 AM
3256 dolar this month coe

gunshead
01-04-2014, 10:40 AM
I officially renewed COE at LTA for another 10 yrs
done
2474 $

march 2024

gunshead
01-04-2014, 10:58 AM
skudai JB

28 March 2014
RM130 box price only including fixing

Givi B27NT Clack

aerodynamic
white reflector
monolock
27 liter
stability at high wind
stronger material
made in italy

gunshead
01-04-2014, 11:04 AM
Skudai, JB

Suzuki Raider R

28 March 2014
90064km

Givi B27NT Clack box RM130

service

engine oil R4 Shell
Clean front sprocket gear sensor area
Grease 707 pennzoil front wheel to smooth
spacer axle and seals

checked
bearing handle - ok good
clutch plate - ok good


Labour RM5

gunshead
05-04-2014, 07:49 PM
went shopping bought some spare parts
for future use long run purpose

gunshead
14-04-2014, 11:44 PM
14/4/14
91227km

skudai, jay Bee
today went to change engine oil
shell rimula R4
pump full air into tyres
tighthen chain drive

Labour charge RM3

got shock to see one screw nail poked into rear michelin tire
used the gum to cover the hole RM 5

gunshead
24-04-2014, 02:52 PM
now machine running 92,000km today morning

tested uphill and hard acceleration - confirmed clutch plates are getting weak. need to change after another 8k mileage

hardrider
24-04-2014, 03:01 PM
Good stuff! I have a Raider 150 too!

gunshead
02-05-2014, 07:54 PM
how long your battery last ?

mine last 3 years sharp. actually still can go more but I not daring so I change to new one every 3 years

hardrider
02-05-2014, 08:23 PM
Got my bike used in 2012.
Battery still works fine.

gunshead
03-05-2014, 10:48 AM
I got my bike resale also
I got it from previous owner at 30,000 something mileage

now bike running 92864km

once scored 00000

need to do many things

Isopropyl
04-05-2014, 04:42 PM
I got my bike resale also
I got it from previous owner at 30,000 something mileage

now bike running 92864km

once scored 00000

need to do many things

look like raider is quite a lasting bike. Spark 135 connecting rod bearings won't be able to last so long. it keep running, but the bearings is toast when reaches 40,000-50,000km.

anyway, love reading your maintenance record. haha...

gunshead
11-05-2014, 12:40 PM
5/5/14

Pelangi, Jb

wash bike RM 7
wax RM10

Starshop , skudai, JB
meter 92690km
5/5/14

change engine oil R4 shell 1100ml
change oil filter

oil and grease rear seat lock cable
labour RM5


Brlliant Motor, taman U, Jb

meter 92699km
5/5/14

fix racing boy 50mm auto chain tensioner RM80
removed old S.R.K. auto chain tensioner

Cushion shop, taman tun aminah, JB

increase seat height for more comfort
put sponge on seat mold and on seat default sponge
RM20
nicely done , whole process 45 min

terenceFHS
11-05-2014, 10:12 PM
Hi guys if any of your friends wanna get the bike, pls go Small Mah n have a look as I'm selling it now.
Cheers...

gunshead
15-05-2014, 02:00 PM
14/5/2014


one to one change IU under warranty

fantastic handwork service at SIn MIng

modified bracket to suit me - IU looking up easy to see the lcd panel

IU warranty = 5 years

Void warranty if

IU got scratches
IU don't have approved bracket with 4 rubber tagged with screws

gunshead
23-06-2014, 09:10 AM
Raider R new air filter color is red
also the part number changed...... it has number 2 in between
I think it has better compression rate

gunshead
23-06-2014, 09:12 AM
new FU150 model year 2014
Philippines, Indonesia, Vietnam , Thailand enjoying this new model release yr 2014

gunshead
23-06-2014, 09:14 AM
for those raider R facing meter not turning back to 00000 after 99999
solution is there
the meter has a code 01 on part number
that means they have rectified the problem
it can bought has one set
I have bought mine

computer.otaku
05-07-2014, 03:05 PM
Hi guys if any of your friends wanna get the bike, pls go Small Mah n have a look as I'm selling it now.
Cheers...

still available?

hardrider
05-07-2014, 08:02 PM
My Raider needs a service. Static oil leak from base of crankcase. Probably gasket cracked... can someone recommend a mech with access to parts and familiar with the bike?

gunshead
19-07-2014, 03:26 AM
95800km ON 18/7/14
skudai , Jay Bee

change Shell R4 engine oil
SINNOB sprocket chain set ocean blue color
Fix new double stand + spring + cushion
swingarm sub hole put new grease pennzoil
body goyang -checked NIL. perfect condition
Fix accesory 2 wheel sticker DOME Suzuki

gunshead
19-07-2014, 03:28 AM
continue on above list

7seater
28-07-2014, 10:01 AM
Hi. I am new to this thread. Just confirmed to buy a used Raider 150R. Hope my choice is right. The crab is upgraded but I don't really like. More for leisure riding as getting older. Senior and experience users of this bike, feel free to share your advise to me.

Notice reasonable parts available in JB as share by gunshead. This is very good for new comer like me. I think the chain tensioner is good add on. I will find a day to visit to JB.

7seater
28-07-2014, 07:15 PM
Notice you guys always mentioned bike washed (RM7) and polished (RM10). Please give me the available address.

7seater
28-07-2014, 07:19 PM
Hi, Can't locate this "Setia Tropika" thinking of going to visit this shop to purchase or service my bike. Any one can help?

gunshead
28-07-2014, 10:43 PM
get the full address in www.suzuki.com.my setia tropika I available in gps
also the bike wash/polish place after hari ray stopped washing bikes cause he say no profit
raider is not recommended unless u have a lot cash
raider parts not cheap if involve overhaul
make sure bike good condition in engine otherwise forget it

7seater
29-07-2014, 10:18 PM
Hi Gunshead. Suppose to make transfer on 1st August. Can't really judge whether the engine is still in good condition. Seems you don't favour Raider. Having bad experience? Please share. But on all earlier post, seems having good post or review on this Raider.

The bike I want to buy is in this forum used bike. Maybe you have seen the ad. Maybe you can tell me more.

7seater
29-07-2014, 10:24 PM
Thanks for the map of Setia Tropika. Roughly, I think I can find it.

gunshead
30-07-2014, 08:21 PM
7seater

raider is a well perfect balance bike
fantastic bike

DOHC
scem engine
sacs build in
6 gear
highest raw power - king of underbone on planet earth

i love suzuki raider

what i say is this bike serve well if the owner knows technical aspects and of contacts and have parts catalogue and knows how and when to do servicing

but it is a tragedy if someone try to modify and made it become horrible

if u follow all the pages in this forum and know the way i work on raider , u will notice the bike is strong

gunshead
30-07-2014, 08:26 PM
i bought my raider also from this forum. one person advert here. Got it SGD 3000 at about 30,000km mileage many many years ago

i never had bad experience with raider.....what i am saying is i cannot guarantee if your bike or u urself is good with technical knowledge. If raider spoilt , i tell u it is not cheap in engine overhaul
it can shoot up to 500 hundred over dollar full overhaul . i know this cause i saw other people overhaul

7seater
01-08-2014, 10:45 PM
Thanks for your kind sharing on Raider. Agreed that knowing the maintenance helps any bike on long use and less trouble. Definitely, wear and tear has to be taken care well.

Anyway, I have bought the Raider today and all transferred. Now notice the air box is noisy during ride. Need to check the air box. Heard my ride is using upgrade carb. Luckily I have the original carb. As not good in turning, maybe have to change the carb back in JB. Anyway this week end will be busy to do up the bike and check at the same time.

7seater
03-08-2014, 10:09 PM
Hi Gunshead. Please advise.

1) Referring to the fuel gauge. What is the minimum level to refill petrol? Today after the fuel mark blink, I start to pump up. But can only pump in 2.5 litres of fuel. Should I used to much more lower until the last bar vanish? Will there be another indicator on fuel at it's lowest?
2) Is 92 RON fuel acceptable or must minimum stay at 95 RON fuel?

7seater
03-08-2014, 10:23 PM
This weekend, I open the bike's top cover to check the current carb. Notice it is using an open port cone air filter. Rather noisy. I want to change back to original filter or less noise. Any advise?

My bike's handle vibration is strong. Found that riding from Jurong to Tampines make my hand numb. Is it normal? If not normal then what could be the possible cause so that I can improve or put back my bike to it's best condition. Kindly advise.

Another issue is the pillions foot rest vibration also strong. Not comfortable for long journey. What can be done?

gunshead
06-08-2014, 10:24 PM
1. when double blink ( not single blink ) double flashing means u left another 14 - 16 km so now time to fill in petrol
2. all those vibration caused by chain sprocket set. Change to a new set.

gunshead
06-08-2014, 10:27 PM
1. change back to orginal filter box and air filter
2. ron 92caltex with techron is excellent fuel

7seater
07-08-2014, 01:05 PM
Thanks for the feedback. Maybe this Saturday will drop by to JB for the changing. Is it true that Setia Tropika shut on Saturday?

gunshead
08-08-2014, 08:00 PM
setia tropika
Suzuki genuine service centre
Monday to Friday
8am till 5:15pm

7seater
09-08-2014, 04:04 PM
Went to JB this morning (Sat). Find the nearest shop at terbau (HK Motor). Change back the original carb. Damage quite bad. I list and you share whether this shop is slaugthering

1) Brake Switch RM18
2) Choke cable RM18
3) Starter Switch RM65
4) Throttle cable RM28
5) Labour RM35
6) Rear brake disc RM115
7) Rear brake pad RM20
8) Rear brake switch + spring RM25
9) Air filter RM35

Are the item charge reasonable?

7seater
09-08-2014, 06:13 PM
pump to full tank in JB. Reach Jurong with 1 bar down. Seems like original carb do not really giving good fuel saving. Maybe need to monitor more

gunshead
09-08-2014, 07:38 PM
i have no clue about the items u changed,
I never change anything u did except the air filter and rear brake pad

original Suzuki pad NISIN and air filter far cheaper then above

anyway, I see u changed all items related to safety = GOOD

carburetor and air filter use original factory is the best for long term planning

gunshead
09-08-2014, 08:29 PM
try one time take annual leave and go to setia tropika
before go

u must call and make appointment


always check the website www.suzuki.com.my
they host free test ride bikes and free service campaign
u will meet those technicians directly from factory penang over there

see attached

7seater
10-08-2014, 04:23 PM
Maybe I should do so taking annual leave to visit Setia Tropika. When they told me the price, I some what feel it is costly since I has been ready in this forum. Even their oil filter is charging at RM12. Here stated RM5.40. Tarmhanks for sharing.

Now the idling is not good as it does not fall to 1500 rpm and stays at 3000~4000 rpm. Need to use engaging of gear to jerk it down. The mechanic said could be carb rubber harden due to no use. It should return after some time. Still monitoring.

7seater
10-08-2014, 04:27 PM
Notice my headlight for main is single top bulb. If high beam is 2 bulbs light up. It that correct?

7seater
10-08-2014, 04:32 PM
My bike exhaust seems louder than usual bikes. Any way to stuff in something into the silencer to lower the noise? Anyone tried? Although the mechanic said it was original level

gunshead
10-08-2014, 10:04 PM
1400RPM IS THE CORRECT ONE. Exhaust noise will low so silent on 1400rpm

u must change the diaghram (rubber) inside carburator. It is RM7.40

Also u must tune the air intake to correct turning set. Refer to my tips given here in previous forum pages.

My bike both bulbs will light up once engine start
correct bulb is 18W below and top is 32W

Also you must change the tensioner + cam guide . It is sold in one set . Now the price has been reduced. I think is only RM74
Do all this in setia tropika

The technician is super specialist in DOHC engine for FU150 model
He will list out the things for you to change base on your mileage km

7seater
10-08-2014, 10:40 PM
My bike at 99,999. So not sure of mileage now. It seems that Setia Tropika price is reasonable. Just difficult to trust local JB work shops. Will try to find your post to tune the carb.

7seater
10-08-2014, 10:54 PM
Remember seeing your thread indicating 2 quarter turn and 3 turns. Will search for it

gunshead
10-08-2014, 11:37 PM
don't do bikes near the causeway
travel far inside
there are so MANY trusted ones
I myself do bikes in Skudai.

Already made booking last few days

Our Raider R is first model and factory found out got defect in EPROm programming. The meter should spin by auto but failed. So they came out another 01 part and this rectified one can spin to 00000

The latest Belang and Raider all can spin automatically.

See my post above on the 01 part replacement

gunshead
10-08-2014, 11:47 PM
My Raider needs a service. Static oil leak from base of crankcase. Probably gasket cracked... can someone recommend a mech with access to parts and familiar with the bike?

where do u want to do ? JB or Spore ?
refer to few pages behind
I have listed those msia, indon, spore contacts and numbers

7seater
11-08-2014, 12:51 AM
Saw your O1 parts replacement. So you mean the whole meter must be replace or just the EPROM can be change or reprogram?
Since you are going in tomorrow, please get the address of your regular trusted mechanic or work shop. I should be able to find it through google map.



don't do bikes near the causeway
travel far inside
there are so MANY trusted ones
I myself do bikes in Skudai.
Tomolo will in Skudai with my favorite mechanic
Already made booking last few days

Our Raider R is first model and factory found out got defect in EPROm programming. The meter should spin by auto but failed. So they came out another 01 part and this rectified one can spin to 00000

The latest Belang and Raider all can spin automatically.

See my post above on the 01 part replacement

7seater
11-08-2014, 12:51 AM
Prefer to do it in JB where possible.


where do u want to do ? JB or Spore ?
refer to few pages behind
I have listed those msia, indon, spore contacts and numbers

7seater
11-08-2014, 01:30 AM
Hi Gun, you seems to have a spare chain tensioner? Want to let go one?

7seater
11-08-2014, 01:37 AM
Gun, I saw you ever change your rear wheel bearing noticing noise. Does it cause to you handle vibrations? Not handle jumping, but just vibrate causing hands getting numb over long ride.

7seater
11-08-2014, 01:55 AM
Hi Gun, How is your test on this set of sprocket in your previous post. Is it good? If you used front 15T, shouldn't you use like 46T at the rear to compensate? Otherwise, you may loose power. Although it look like it can drag more.

RK chain japan
sprocket sss 15T front
samata sprocket 34T rear

7seater
11-08-2014, 10:49 PM
Hi Gun, in your previous post, you state to adjust the carb fuel at 2 1/4 turns. What do you mean by 1 turn? 360 or 180 after full closed of the jet is consider 1 turn? I am not sure whether my selection of the screw is correct as I assume the screw nearer to the engine and seems only 1 screw. The copper screw.

gunshead
13-08-2014, 09:04 AM
too many queries u ask. compile them in one post. U can edit the same post again and again.

I only use the standard setting sprocket the manufacturer wrote in manual. This raw bike machine is tested well in factory and they come out front and rear sprocket size is the best. Also the digital meter speedo gets input from front sprocket gear spin NOT from front wheel spin.

wheel bearing u can change to KOYO or NTN but must be "covered" type and not those open can see ball bearing. Yes. bearing also helps reduce vibration.

my extra tensioner + cam guide one set is for future use. Cannot sell.


why u need all above. Since in setia tropika they have all parts and will do one short everything for u.

our model Raider R is first model so not all item is same as Belang R.
example the meter panel cluster. You can go to chong aik desker rd and ask them to order for you. refer to my early posting for the part number.
You need to change whole set.
I heard other Raider in Spore use car shop to reset to 00000 but was charged SGD 50

The carburetor air turning is super critical . You need to turn 360 degree marked full turn on screwdriver and not based on your hand twisting. I think I did teach and showed picture of the screw , refer past pages. Also I did mentioned how many turning

gunshead
13-08-2014, 09:48 AM
11 August 2014
97324km
Skudai, JB


air filter
petrol filter -suzuki genuine . Good compression
ngk g-power
shell R4 engine oil 1100ml + oil filter (new design)
carb diaphgram
2nd valve PAIR ONE SET with nut (new design).
Clutch plate + clutch spring + bolt (new design) + gear driven (new design) + bearing (new design) + gasket clutch cover
4 new nuts body covershield


findings:-
first time opening clutch cover since factory . 8 yrs old bike with 97324km
Clutch area very clean - thanks to shell R3 & R4
Default factory clutch plates and lining in superb condition . Only worn out 60%. Thanks to shell R3 & R4
NGK G-power after 9200km usage, shows very plug clean surface and engine Combustion chamber very clean. Thanks to Caltex techron.
After change PAIR (new design) and carburator diaphrgam , RPM dropped to 1300RPM and super stable.

gunshead
13-08-2014, 09:49 AM
continue on above service

gunshead
13-08-2014, 09:51 AM
tmn pelangi

wash bike RM 7 super deep clean underneath
wax bike RM10
tip RM3

7seater
13-08-2014, 09:00 PM
Ha ha ha. The queries strike my mind so I ask. Thought the bike polishing already gone after the Hari Raya at taman pelangi? Tried tuning the carb today evening after work. Set the screw by 2 1/4 turns by 360 degrees as per turn. Firstly the rpm stay at 3K~4K rpm and not dd itrop as usual. Then tried to turn down the idling bolt. Voila! the idle return to normal. Blow the throttle and it drops as usual. Happy.

Remove both the handle balancers. Will try riding tomorrow to check whether the vibration will improve. Keeping fingers cross.

Want to slowly tune up the bike for keeping. Inspection coming this October 2014. Bought 2 cans of WD40 lithium grease for lubrication. 1 can of high temperature black paint for the exhaust.

gunshead
14-08-2014, 08:55 AM
somehow I go there to wash bike
quietly
they washed maybe unhappily
hahahaha

gunshead
14-08-2014, 11:00 AM
super bad idea to remove handle balancer

vibration caused by your sprocket chain set. just change them

7seater
14-08-2014, 01:12 PM
Gun, what is the purpose of the handle bar balancer? Last time I ride those bikes do not have this balancers at all.

Anyway, this morning ride found handle vibration still around. So not the cause.

Notice my bikes swing arm at rear contact with the absorber has free gap. If put on double stand, the rear wheel can shake up and down. The shock is YSS. The shaft and hole has free play/gap. Will squeezing in rubber padding helps to solve this issue?

Now my ride the idling is good. It show the mechanic who set in JB during the change out it at 1 turn only. Now at 2 1/4 turn, feels good. More monitoring.

gunshead
14-08-2014, 03:46 PM
put back the balancer. balancer has its own purpose....lazy to type here

absorber thing I not sure

idling at 1400rpm is the best and correct

7seater
14-08-2014, 08:36 PM
Notice raider even at 6 gear, the speed picks up very fast just by twisting the throttle without any need of dropping gears to drag. Loving this bike. Should be the right choice that I have taken. Always like to have a reasonable quick bike. The handling is stable, fast and sharp.

Just need to solve the vibration will perfect the raider. Must follow Gun's suggestion to change the sprocket chain set and both wheels bearings. Gun, have good workshop with address in JB to recommend? Like you said, near the custom area shops not so good and costly. But not this weekend cause tie up. Maybe next weekend.

By the way, how is your shinob sprocket set? Is it much better than those standard sprocket sets in the market?

gunshead
19-08-2014, 09:54 PM
raider r fuel meter reading block by block

also see most below I have another picture with per block mileage side by side

gunshead
21-08-2014, 01:07 PM
By the way, how is your shinob sprocket set? Is it much better than those standard sprocket sets in the market?

7seater,

DO this
go to Tampoi
Kang Soon accesory spare part shop, tampoi, taman dato penggara barat
very easy to ding in map
it is along skudai highway only at main road can see uphill

ASk for

STT sprocket super hardened steel front and rear sprocket
O-ring CHOHO chain 428 120L RM75

buy these 3 items and bring to your shop and fix
BUT LET U KNOW

u must get back the original pin for front sprocket cause front sprocket holes and pin matches only for raider R. I believe previous users modified the front sprocket and pin to yamaha RXZ type. so watch out

otherwise when u buy at Kang Soon ask for front sprocket STT for yamaha rxz.

Also to know the parts visit http://eparts.suzuki.co.id/

gunshead
21-08-2014, 01:10 PM
to all raiders

use o-ring as chain drive
do not use normal 428 or 428 heavy duty
this bike is 120link long and very fast slack loose. it is wasting time always to go thighten
this also casues power ratio drop cause chain loose

must use o-ring chain
cheapest o-ring i use is CHOHO o-ring made in china but it has highest quality and japan spec and certified by norway standard
RM75

gunshead
21-08-2014, 09:55 PM
meter

97966km

changed engine oil
shell R4 1100ml pour until middle line through inspection window
changed oil filter
changed oil filter O-RING

gunshead
21-08-2014, 10:02 PM
fuel tank mileage meter reading

7seater
22-08-2014, 09:40 AM
ever tried with last bar 1st blink. Ride on from Chinatown havelock CTE all the way to yishun st23 then back to jurong. Finally, in KJE, chua chu kang, start to blink double. Not sure how many km as my odometer already stop at max. Looks quite far for the last bar blinking usage.

7seater
22-08-2014, 09:45 AM
7seater,

DO this
go to Tampoi
Kang Soon accesory spare part shop, tampoi, taman dato penggara barat
very easy to ding in map
it is along skudai highway only at main road can see uphill

ASk for

STT sprocket super hardened steel front and rear sprocket
O-ring CHOHO chain 428 120L RM75

buy these 3 items and bring to your shop and fix
BUT LET U KNOW

u must get back the original pin for front sprocket cause front sprocket holes and pin matches only for raider R. I believe previous users modified the front sprocket and pin to yamaha RXZ type. so watch out

otherwise when u buy at Kang Soon ask for front sprocket STT for yamaha rxz.

Also to know the parts visit http://eparts.suzuki.co.id/


Thanks Gun. Will check with the shop. The ring is important.

7seater
24-08-2014, 07:47 PM
After a week of no start, the battery flat. Jump start it it seems ok. Once battery flat, even kick start won't work. Now notice that the battery is only 3AH. Where as it should be 6AH standard.

Wonder how big capacity battery can be installed on to raider? What is maximum magneto able to charge on battery?

gunshead
24-08-2014, 10:30 PM
correct
this electrical schematic diagram very complicated due to digital meter panel
so even kick start will not start

6AH is correct

ALSO BATTERY MUST BE SPECIAL TYPE- SLEEPING TYPE
DO NOT INSTAL NORMAL BATTERY
U MUST BUY THE SPECIAL Z TYPE WHICH CAN BE SLEEPING POSITION

7seater
25-08-2014, 12:03 AM
Just put silicon into the handle bars to reduce buzz. Next to change the grips and put on balancer.

Follow by sprocket set. Thinking of removing the lower part of the fairing or cover. Will it gives better cooling to engine and carb tuning, I guess.

gunshead
27-08-2014, 10:54 PM
Suzuki Raider R 150cc
Suzuki Belang R 150cc
Suzuki Satria F 150cc

gunshead
27-08-2014, 10:58 PM
Features

Suzuki Raider R 150cc
Suzuki Belang R 150cc
Suzuki Satria F 150cc

7seater
28-08-2014, 01:04 PM
With silicon inside the handle bar, ride is slightly better than without. Now can go at 90kph and buzz is bearable. This is at 6500rpm. Touching 8000rpm still face strong vibration.

7seater
31-08-2014, 08:59 PM
Found Kang Soon In Jalan Skudai. Too bad they are closed on 30th Aug. Maybe go in next time. Anyway install the handle balance and grip. Throttle side buzz low. Now notice at 110kph the seat has vibration. The idling still not smooth in cold start. Once hot, it stable. Change the rear tyre Dunlop TT900 on size 80/90 @ RM105.

During the weekend remove the bottom fairing. Bike inspection passed. Retighten the handle balancer. Test again sometime this week on the buzz. Wanted to paint the exhaust but not able to remove 1 piece of the exhaust bolt at the block. Is there any brush application high temperature paint? Maybe ask motorshop to remove the bolt.

Check the silencer by removing the 3 bolts but not able to do anything as the silencer is enclosed piece.Thinking of lowering the noise.

gunshead
02-09-2014, 07:22 AM
something nice

Raider R using SCEM cylinder block same like gixxer

I took photo of my Raider R

gunshead
06-09-2014, 01:33 AM
original once upon a time

our is blue/black

they had yellow/black too

SUJEN
10-09-2014, 03:50 PM
hi guys im new here...im using suzuki belang r 150..( malaysian )..
now im looking for Fxr 150 parts in singapore....
can anyone let me know where i can find one?

gunshead
11-09-2014, 02:43 PM
no FXR 150 in Spore.
Buy in penang
ask them www.suzuki.com.my

7seater
18-09-2014, 07:25 PM
Belang not popular in Singapore. Maybe can go to Batam if you are staying in Johor area. Batam has the model as Satria. Hope this helps.



hi guys im new here...im using suzuki belang r 150..( malaysian )..
now im looking for Fxr 150 parts in singapore....
can anyone let me know where i can find one?

gunshead
20-09-2014, 09:45 AM
16/9/14 99999.9km at tmn u jb

gunshead
21-09-2014, 08:27 AM
Caltex techron very good for engine
I just took sample into bottle transparent
notice it is so clean

7seater
23-09-2014, 10:53 PM
Wonder if changing to a more silent muffler than original will fail inspection?

7seater
07-10-2014, 10:05 PM
Went to JB Kang Soon looking for the sprocket set. Sad that they do have the ratio that I ask for. Maybe check again next time. Also went to Setia Tropika Suzuki assembler to get some parts. Change the diagpharm inb the carb. Too bad it remains the same for the idiling. According to the motor shop maybe my bike is high cam. so idiling irractic.

7seater
07-10-2014, 10:09 PM
After return for 2 days, while riding, suddenly the bike die off and no longer to start. Like no petrol supply. but not able to determine the cause. Anyone able to guide?

Also notice another problem. The spark plug has engine oil surrounding the it. But the firing point is dry. Checkin from internet is the seal is worn. Now to to get the parts.

7seater
07-10-2014, 10:10 PM
Found that all my hoses (fuel hoses) are harden and crack. not sure this will be the causes of not able to start. Now headache.

gunshead
09-10-2014, 11:47 AM
fuel cock. change the entire hose to high temp hose and then change the fuel cock. fuel cock can cause inconsistency.
Also check the PAIR 2nd valve reed.

gunshead
09-10-2014, 01:11 PM
https://www.facebook.com/sttracingsprockets

gunshead
14-10-2014, 07:53 PM
more infos

gunshead
17-10-2014, 11:04 AM
15 oct 2014
99999km
mirror LHS housing broken at JB custom by itself

JB

changed

1. lever assy clutch one set . It includes switch assy and lever clutch.

57500-25G30-000 LEVER ASSY CLUTCH - one set RM42.80
comes with
57470-25G01-000 SWITCH ASSY CLUTCH
57620-23F00-000 LEVER,CLUTCH (BLACK)


RHS LEVER ASSY, BRAKE 57300B21D10N000 - one set RM17.80


above components used by NEW Raider 150 model yr 2014

gunshead
17-10-2014, 11:07 AM
16/10/14
99999km

choho o-ring fix on sinnob
choho o-ring RM75

gunshead
17-10-2014, 11:09 AM
16 oct 14 change new speedometer

99999.9km hang
never spin

Suzuki did correction and new part number is
34100B25G01N000
01 means minor change
SGD65

gunshead
17-10-2014, 11:11 AM
16 Oct 2014
99999km
JB

sticker no.1 stick fuel tank indicating bike completed 100,000km

Fix new speedometer. Suzuki did correction and new part number is 34100B25G01N000. 01 means minor change

New 2 nuts for headlight cover.
New 2 washer for front fender.

front wheel grease pennzoil and
changed front wheel 2 seals
changed fork oil ELF synthetic 5W

Sinnob + + chain 428 O-ring Choho Made in CHina RM75

1100ml Shell R4 + oil filter

fully charge battery

WankieWankie
26-10-2014, 01:41 PM
Hi im new here. Im looking for a raider but cant seem to find them in SG. Anyone knows where can i get them? :confused:

Btw I think i saw a newer version of Raider call Raider R150. I only know that the newer version has a electric start and bigger-looking engine air vent. Anything else i missed out? :?

7seater
29-10-2014, 09:12 PM
Welcome to Suzuki Raider. Not sure of the new model. I am riding the 1st generation which has electric starter. My bike is 6 years old. Still doing it up.

7seater
01-11-2014, 11:39 AM
Finally, my bike can start after sending to workshop. Damage $76 for all the following. Change the fuel cock. Lucky I bought 1 pc in Malaysia. Service the carb. Now the slow/idle is good. lack of skill to tune. One unfortunate thing is that the battery is flat and has to be changed. This is due to not able to start and keep for long time. About a month and the battery is flat. So be careful not to let your bike store too long without starting.

7seater
09-11-2014, 08:40 PM
Riding my bike this week. Notice 2 separate times of engine popping/explosion sound during releasing of my throttle. Try to find the cause from youtube. Suggested it could be cause by leaking from carburetor to engine. So check the rubber hoses after the carburetor entering the engine. Found the clip is loose and not tighten. So tighten it today (Sunday). Will monitor the outcome.

Change some rubber hoses around the carburetor as most starting to crack.

gunshead
10-11-2014, 02:51 PM
for Suzuki
this pop sound after release throttle is cause of

PAIR

change the 2nd valve reed .....around RM 27
also change the spark plug as well
also make sure all hoses from carburetor is tighthen and if crack change them to high quality

see 2nd valve reed in PAIR that I change in previous posts

7seater
10-11-2014, 09:54 PM
Hi Gun. Thanks. Will try to look for the 2nd valve reed. Do you have any shop in JB to recommend for cutting the seat. I want to have a lower seating.

gunshead
11-11-2014, 08:48 AM
for seat I do in taman tun aminah, skudai
this is car seat shop
however he do for bikes also

it is along the main road in tun aminah
I don't have address

I do all my bikes seat here
only less then RM40 includes changing seat cover

but for u to cut seat and use back the same cover then maybe RM 15 or RM20

gunshead
11-11-2014, 11:23 AM
PAIR

2nd valve reed

7seater
11-11-2014, 01:06 PM
What is the purpose of the 2nd valve reed?

7seater
11-11-2014, 01:09 PM
Thanks. I will try to locate. After turning into tun aminah, roughly how long more reaching the shop? Is the shop on left side ot right side of the main road in tun aminah? This will narrow my search. This car cushion shop is chinese operated?

gunshead
11-11-2014, 03:18 PM
yes

from skudai highway, u turn left to aminah

then on the main road u see first traffic light
go straight
see second traffic light
go straight

look on the left
the shop Chinese man car seat is 2nd shop ; neighbor to car accessory shop


car shop

gunshead
11-11-2014, 03:37 PM
PAIR is Pulsed-secondary AIR-injection System

2nd valve reed is called VALVE ASSY 2ND KIT REED


This one is to trap all dirt air with bad emission into our environment
You can change this small piece by itself separately
You will see the worn out is black color means Mo2, Co2 all bad gas trapped here
This will also block fresh air enter combustion chamber therefore you will have pop pop sound when you release throttle
Just remember to change every 30,000km
Think Blue, see Green , love Earth


It is a common practice for bikers or mechanics to disable the PAIR system popping noise. yes, PAIR can be disabled easily.
Disabling the PAIR system will NOT increase performance since all of its effects are on post-combustion gasses. Disabling it will however increase the amount of hydrocarbons that YOU allow to enter the atmosphere.

PAIR system was designed to reduce the amount of raw unburnt gasoline discharged into the atmosphere.
These unburnt gasses, from motor vehicles and aircraft are one of the hydrocarbons that contribute to the greenhouse effect.

7seater
11-11-2014, 09:09 PM
Thanks for the direction



yes

from skudai highway, u turn left to aminah

then on the main road u see first traffic light
go straight
see second traffic light
go straight

look on the left
the shop Chinese man car seat is 2nd shop ; neighbor to car accessory shop


car shop

gunshead
14-11-2014, 05:07 PM
FB battery made in Thailand Suzuki SC JB original belang R
14/11/2014 meter 16km
FTZ7S
RM110

make sure fix correct battery cause it must be sleeping position approved.

7seater
16-11-2014, 03:34 PM
Now my battery capacity is super small at 3.5AH. It cost me $58. No choice but to use till it weakens then change to correct type for my bike. :slapforehead:

gunshead
17-11-2014, 07:33 PM
vicom test now front number plate cannot sticker
must use the steel type

7seater
26-11-2014, 01:10 PM
Mine also sticker plate. May be affected on next inspection. :?

gunshead
27-11-2014, 10:25 AM
http://www.suzuki.com.my/belang-r150/photogallery-belang-r150.html

gunshead
27-11-2014, 10:27 AM
http://www.suzuki.com.my/news-events/promotion.html

7seater
08-12-2014, 09:17 PM
Actually is there any usefulness of the bottom cowling? Will it make my bike more stable without it at high speed?

7seater
14-12-2014, 06:06 PM
On Sat & Sun tried my bike with and without the bottom cowling. Without the cowling is definitely more stable ride at 130kph. So decided to keep the cowling away. Look doesn't matter much as compare to safety.

Try setting the carburetor fuel mixture to 2 & 1/4 turns. During decelerating of throttle has loud exhaust poping. Now setting at 1 & 3/4 turns. Under monitoring.

7seater
14-12-2014, 09:12 PM
During free rev, will the tacho goes beyond 13K rpm for a stock bike?

Rather disappointed that my bike max speed is only 130kph. Always saw on youtube can easily reach 150kph.

rope
17-12-2014, 08:07 AM
Anybody selling their raider? Or know of anybody selling a ok condition one? Wanting to get one!! Thanks...

anodise57
24-12-2014, 11:55 AM
http://vishava.com/wp-content/uploads/2014/11/4-christmas-cards.gif

gunshead
26-12-2014, 11:41 PM
today meter was 1339km 26/12/14
means 101,339km
changed shell R4 engine oil

7seater
07-01-2015, 08:13 PM
Don't know what happened after fill up petrol in JB and my bike idle is is gone. The bike die off. Have to twist higher throttle to keep bike going. Finally, service the carb and it works fine. Sigh......

Change back to 7AH battery as the 3.5AH battery cannot make it. Cost me RM110. Cut the wrap the seat RM40. Carb servicing RM17.

Later to fix up a led spot light which is very bright.

gunshead
15-01-2015, 02:09 AM
Using Ron 97 Caltex Techron

gunshead
15-01-2015, 03:31 AM
clutch lever free play
make sure less then 15mm or at 1cm only

gunshead
21-01-2015, 07:29 AM
Do always check tensioner noise
if tick tick tick
better adjust or change auto tensioner asy

7seater
21-01-2015, 08:14 PM
my bike tensioner seems not original as told by the suzuki mechanic. maybe need to change

gunshead
22-01-2015, 01:50 PM
using ron 97 Caltex techron
today poured in techron concentrate plus
to clean the 9 yrs old carburetor and combustion chamber DOHC

gunshead
22-01-2015, 01:51 PM
7seater,

change with SC , setia tropika

I think original set comes with cam guide 1
then they open and do all in one go
rm120 is sufficient I suppose only

7seater
24-01-2015, 02:01 PM
Ok. Will arrange 1 day to visit to Suzuki at Setia Tropika

gunshead
28-01-2015, 02:32 PM
wash and wax using waxco mettalic

wash RM7
wax labour RM10
tip RM3


2912km 26/1/15 and 27/1/15

checked tensioner noise

SC said normal engine noise ...tensioner still OK only.
foreman said no noise at all ...tensioner + timing chain - OK

serviced bike
engine oil shell R4 only
wd-40 all area
tighten chain
chain lube spray
tire pump air
headlight ( 2 bulbs ) check - OK
throttle free play - OK fit
throttle smoothness serviced put anti-rust and oil
cable lever clutch adjust freeplay 10mm or 1cm
checked for cowling fairing vibration - OK

full tank Ron 97 caltex techron

7seater
10-02-2015, 08:31 PM
Hi Gun, so far you use the Waxco is is good? In terms of shine, lasting and ease of application? Good in removing stain on paint?

gunshead
11-02-2015, 09:16 PM
use that particular waxco wax metallic . must be the same I used. it is superb

7seater
20-02-2015, 10:12 PM
Happy Chinese New Year to all

gunshead
06-03-2015, 05:41 PM
i use RON 97 in JB Caltex techron
RM 2.25 yesterday

gunshead
25-03-2015, 07:12 PM
yesterday went to change engine oil
shell R4

hwahwa187
12-04-2015, 04:19 AM
Can pm me your number gun head
My Suzuki need parts and maybe u can bring me in jb tgt when free,

gunshead
13-04-2015, 10:57 PM
u have gps ?

why not u see
www.suzuki.com.my

JB branch in setia tropika
u can go there urself
8am till 5pm only

they have genuine all raider parts

gunshead
12-05-2015, 04:15 PM
11 may 2015
meter = 05703km

changed the fuel lid cap
cause suspect after full petrol tank the rubber is not strong and leakage around tank

changed to new corrective action part number

7seater
12-05-2015, 07:53 PM
Hi Gun, any possibility of having a bigger fuel tank for our bike? You have ever come across? Tanks is just too small and refilling frequency too short. Do you know some shops do such fuel tanks. Thanks.

Rick^Man
19-05-2015, 12:56 PM
Hi guys, after riding for so long, decided to buy 1 raider back to keep. after 2 sonic, 1 raider.... i need 1 now. anyone has one to sell?

gunshead
21-05-2015, 10:11 AM
7seat,

i seen in KL
belang riders who travel cross states

has one small tank which is nice looking in front of seat

it has one pipe

where they buy - i don know

maybe u go some shops and ask this typoe of tank

or u may ask belang community

or ask suzuki service centre
technician may know where to get

it is safe and reliable tank

7seater
21-05-2015, 10:30 PM
Hi Gun, Thanks. Will check with the Belang community.

gunshead
05-06-2015, 10:13 AM
bike now meter showing 0614km means 106,614km
coming soon will go for full service = plug, air filter, brake oil, fork oil, disc pads, tires, petrol filter, diapghram, etc
need to plan carefully

gunshead
17-06-2015, 09:01 AM
meter 06179km 16/6/15

bought at setia indah kim seng spare part

michelin pilot street front and back tires for Raider R FU150

fixed at skudai

Michelin pilot street 70/90-17 80/90-17

fix both tires new L shape valve nut

greased Pennzoil red grease on bearing and important areas

cleaned brake caliper and disc pads

both disc pads are in excellent condition

gunshead
26-07-2015, 09:14 AM
kang soon motor accessories and enterprise
20 jalan tanjong
taman dato penggawa barat
tampoi
81200 JB

gunshead
17-08-2015, 09:09 AM
07377km 15/8/15 service major

one day at 4400km road flood at woodlands custom . water caused electrical off. Then start back. OK It happen twice. Why ?
Today mechanic said there is tiny hole inside block for water flow in/out in case of flood. So it may have blocked with dirt. So he used air spray gun to blow out residues.

changed
air filter yellow color
ngk G-Power
many screws of body cover frame changed to new one cause one one thread worn out. Used all genuine suzuki screws.
Tighten adjuster clutch cable lever
Red Grease and wd-40 CABLE ASSY,THROTTLE
Brake fluid Mobil DOT 4
Overhaul front disc caliper . changed many corroded components. Apply red grease
shell R4 1000ml RM17.60.
wd-40 seat hinge / nuts

Labour charge RM20

gunshead
17-08-2015, 09:11 AM
continue more photos

7seater
20-08-2015, 10:20 PM
Went to JB to do some repair.

1) Adjust the chain tensioner. Mine is not original. Thinking of changing next time. Now the engine is smooth. No more funny sounds.
2) My electric start not working. The workshop confirmed it is the starter relay problem. Jump direct, it can start easily. Noe looking for the relay.
3) Change the front sprocket from 14T to 15T. Trying out. So far happy with it. There will be 7% difference.
4) After servicing the carb, my bike has issue and not able to speed up. After much tried by the mechanic, it was the cause of the diaphram. After adjustment, now working fine.

Now my speedo seems very closed to a car. Quite the same speed.

7seater
20-08-2015, 10:25 PM
Just repair a few more things and my bike should be good condition to ride. Raider is a good bike. No regrets buying it.

gunshead
22-08-2015, 08:07 PM
just call Serivice centre, JB Suzuki and u take one day off
go there and do and change all parts

they have parts there and will give back factory standards

gunshead
22-08-2015, 08:09 PM
today evening I saw one raider 15K number plate

7seater
23-08-2015, 11:49 PM
just call Serivice centre, JB Suzuki and u take one day off
go there and do and change all parts

they have parts there and will give back factory standards


Yeah. Have to find a day to JB Suzuki Setia to get all the parts. Especially the starter relay and the chain tensioner.

khai ramburg
25-08-2015, 11:04 AM
Any suzuki raider for sale?

lost4love
25-08-2015, 11:05 PM
today evening I saw one raider 15K number plate


"FE" plate?