User Tag List

Page 363 of 363 FirstFirst ... 263313353359360361362363
Results 18,101 to 18,102 of 18102

Thread: [Group] Super Four Non-VTEC Family: PB1 VerR & VerS

  1. #18101
    Ah Pek
    has no status.
    SBF Lacer Ah Pek's Avatar
    Join Date
    May 2007
    Location
    Hougang/Serangoon North/ AMK
    Posts
    6,702
    Feedback Score
    0
    Mentioned
    35 Post(s)
    Tagged
    1 Thread(s)

    Default



    Quote Originally Posted by azizhussain View Post
    Anyone knows where to get Project Big wiring harness?
    Can't start my bike.
    Short circuit as soon as I press start.
    Checked fuse, non blown. All okay.
    Wait for awhile, switch on ignition back, press again, same thing happen.
    Anyone knows who can troubleshoot?
    Ah Pek?
    May not be easy to find but if you get Ver S..most of the wire by colour code is the same. Have to check around with some of the bike shop..or perhaps asked themt o source for you. If worst comes to the worst..you can start rewiring wires by wires by cutting off the part of the hardness just before the portion that near the handle bar stem where when u turn the handle..that harness moves and get stretch and broke. You have to use new wires of your own just to repair one by one following the colour code. Tedious process but solve the problem. For your problem..it is likely the starter switch wire that may only be broken..but check your switch contact first..spray some WD40 into the starter witch housing.
    Stupid Hurts!.Speed doesn't kill, mistakes does
    BEER!...it's cheaper than fuel now! DRINK!..DON'T RIDE!

  2. #18102
    snowparang
    is selling bike!
    TeePee snowparang's Avatar
    Join Date
    Oct 2003
    Location
    BB
    Posts
    2,327
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by azizhussain View Post
    Anyone knows where to get Project Big wiring harness?
    Can't start my bike.
    Short circuit as soon as I press start.
    Checked fuse, non blown. All okay.
    Wait for awhile, switch on ignition back, press again, same thing happen.
    Anyone knows who can troubleshoot?
    Ah Pek?
    How do you know it's short circuit? If it's short circuit, your fuse will blow.

    Try push start your bike. Can it start and function normally? If yes, then the fault is only in the starting circuit.

    Then check of change your battery. If battery seems ok, most likely it's the engine start switch at the right side of handlebar, or something wrong with your sparkplugs, sparkplug coil or starter motor.
    Email guay_hansen @hotmail.com
    My blog at snowparang.blogdrive.com

     

     
Page 363 of 363 FirstFirst ... 263313353359360361362363

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •