yes...its possible to fixed it onto Spark 135...some minor mods is required...for pricing details kindly contact Azizi at 64560018...cya!
Can i get the pricing(With installation) for the underseat suspension with canister?
hihi...kindly contact Eric @91062303...thank you!
is the GPR pipe legal ?
S4 SPEC 1-2002-PRESENT
GILERA VXR '07-2007-PRESENT
yes its legal...no issue on it...
My X1-R came with the racing footrest and without a side stand. Is it possible one to be fitted on?
yes...you may contact Eric @ 91062303 for more info...
Hello Wing Yap!
I was wondering if you have any stock on Rear Huggers for X1-R? Hope you can PM me the price.. =)
yes...we have..kindly drop by at our respective outlets!!!
can i noe the size of the ride it rims?? do u have it in black.. mind telling me the price..? thx..
Lousy Noob Rider
Hi there...the side is at 1.40 x 17....
Hello again.. Just needed to ask.
The hugger (the Silver one ) from the X1-R photos, is it secured firmly with two sets of nuts and bolts? One set for each side? I got mine done but 1 side secured with nut and bolt but the other, two strips of metal was attached from the hugger to the body of my bike. The hugger is secured but i was wondering if it could be done the way like in the picture in this thread?
Sorry for any inconvenience..
hi there, no worries on your queries...kindly approach our technical staff for more info...should you have any further concern do feel free to drop us a msg again..most impt of all the mounting and all material must be firmly secured....if its not...kindly bring it down to out respctive outlets and we will assess on the condition again...thank you!
hmm.. alright.. I think i'll drop by soon! =)
u shd be rayner rite...no pro...do feel free to drop by again should you have any further queries or require any assistance...thank you!
Dropped by just now.. Big thanks to everyone at Wing Yap! =)
no pro...! Hope to cya ard soon....
how much do you sell the front fender for x1r ..?
hi...which type of fender are you refering to ?
Hi, i was wondering.. My friend's bike is fitted with racing footrest.. mine's e stock footrest.. How much is the workmanship if i want to switch both the footest?..
hi...for pricing details kindly contact TCLee @ 64560018...he will assist you on the details...thank you!
the x1r handling is low, is there any bracket to make the handling higher ?
i feel the spark handling is better ...
Kudos to W.Y staff for making my visit there worthwhile. Will probably go again if i stop by in Spore.(ehem ehem more **discounts**)
hi imran...unfortunately its not available...
as for jurutera...no pro...hope to cya around again...cheers!!!
hi there,can u pm me the price of the racing foot rest and over size disc brake for front and rear...thanks
think for your family when u speed....
hi there, for pricing details kindly contact TCLee @ 64560018..he will assist you on your queries...thank you!
Factory Fender Top Extension is now available for sale.....
Factory Rear Hugger Extension is now available for sale...
For X1-R use only....
How do you install the rear hugger for X1-R? Cause the last time i went down for a rear hugger, i was given a hugger not ment for my bike. They had to drill a hole for a bolt and they secured it with 2 plastic strips on the other side. I REALLY would like it if i could change the hugger to the one ment for X1-R's. Will the drilled hole cause any problem for installation?
Also I would like to ask.
Do you have any Aftermarket Front suspensions for X1-R?
Would like it if you could PM me..
Hi Rayner, thank you for your queries...
The Hugger that came in recently is meant for X1-R series, no mods required which is of direct fixture...
As for the front fork set, we will update once we have any stock on hand...
Hope to cya at our Balestier outlet and Eric will be able to assist you on your rear hugger fixtures...cheers mate!
Hmmm.. But a slight mod (A drilled hole) had been made to my bike because the AMK branch gave me a hugger not ment for my bike. I am worried because of that slight mod, the hugger ment for x1-r wont fit nicely.
I'll be dropping by tomorrow to have a check. *Crossed fingers*
hi..do u have stock of the racing seat now? can u pm me the price if have...thanks
think for your family when u speed....
Hi RAO.. no worries...as the hugger is meant n built for the X1-R series...so it will fit perfectly in...
As for Thomas...the seats are still available...cost range will not exceed 35 as there are a few types on sale...
hi...kindly drop by at our Amk outlet...cheers!
I think Eric is overseas? From his dial tone..
Is there anybody i can call to enquire about the rear hugger?
yes...he's currently overseas...for queries...kindly drop by at our Balestier outlet...hope to see ya ard Rayner...cheers mate!
Hi... how much is needed for the first page X-1R sports rims with tyre... plus the rear brake n gear set?
What's the address for AMK?
bike is a machine without soul, rider would inject new life and character to this machine
Xiao Rou Yi Hao & "Colossal" 919
Sin Ming Editor got 1 DAY jailterm and $2000 fine for pillion death!
Rally Point: http://www.singaporebikes.com/forums/showthread.php?p=5322898#post5322898
hi...please contact TCLee for more info on pricing...cheers!
Wow. is there a place whre it could be mod to the 1 sitter type of bike?.. lol.. Btw, for the rear hugger, what col do u hav?.. got gold?..
hi...the hugger only comes in red, blue , black and silver...im afraid that it does not comes in gold....
as for the mods on the one seater...major adjustiment will be required...as long as you are comfortable its possible...should you be interested...kindly drop by directly at our Amk outlet for more info...cheers!
Roughly how much on the average will it cost to do such a mod?.. probably can give a price range.. den TP will catch boh?.. if made till this way.. Looking for a mod that could squeeze in 2 person, but still of that sort of mod in the pix..
it should not exceed 800 with installation and paintwork....with your X1-R being so eye-catchy in some sense...you are bound to attract some unwanted attention...
so based on your question...the chances is pretty likely...as its usually meant for race purposes and not for daily usage on normal roads...please note! Cheers!
hi.. new here.. i juz gt my new x1-r 2008 edition yesterday.. juz wanna ask do hv mod swing-arm?
hi prince....wat do u intend to do to your swingarm?
the above pics on the X1-r should give you some ideas on how your beloved X1-R will look with the single seat rear tail assy...if you need to clear any doubts do drop by directly at our Amk side...cheers!
do u have stock for x1-r rear hugger, red?