User Tag List

Page 73 of 76 FirstFirst ... 23636970717273747576 LastLast
Results 3,601 to 3,650 of 3755

Thread: [Discussion] Typical prices for Phantom repairs & mods

  1. #3601
    matthias76
    has no status.
    Class 2A matthias76's Avatar
    Join Date
    Nov 2013
    Posts
    592
    Feedback Score
    1 (100%)
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default



    Quote Originally Posted by ricebandit View Post
    The mixture screw on my carb has seized. any ideas where I can get a used carb for the phantom?
    try the scrapyard at 74, Sungei Kadut. If you can convince Adiva78 to go with you, he might be able to bargain a good price for you.

  2. #3602
    matthias76
    has no status.
    Class 2A matthias76's Avatar
    Join Date
    Nov 2013
    Posts
    592
    Feedback Score
    1 (100%)
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by UshioChan View Post
    Hey guys !! By any change does anyone know where can I get the "phantom" emblem ?? The one paste on the side of the tank

    Sent from my HTC One using Tapatalk
    If you want the Gen2 ones, Ah Boy has stock. If its the Gen1 you are looking for, ah boy may have too, but you will need to wait quite a while, cos he will hunt it down with the other shops for you.

     

     
  3. #3603
    matthias76
    has no status.
    Class 2A matthias76's Avatar
    Join Date
    Nov 2013
    Posts
    592
    Feedback Score
    1 (100%)
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by adiva78 View Post
    Don't think it is a ridiculous question at all!
    I would guess it is more a matter of if u r willing to fork-out time and $$$.
    If that is not a problem, anything is possible.
    Not ridiculous. I've been thinking of installing one since 2007. Since then, I have never out it to action cos

    1. Cost too high, someone quoted me way back about 300 plus
    2. Too dangerous mod - cos need to weld mainframe. If inspection fail, bike will have to scrap.

  4. #3604
    snookie51
    has no status.
    L Plate
    Join Date
    Aug 2009
    Posts
    27
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Hi guys, I have just brought my Phantom to a shop in Ubi to weld back its side stand. According to the operator, it is quite a common problem with Phantom. The shop's address is:
    Jeep Chee Trading Pte Ltd.
    Blk 3007 Ubi Road 1 #01-426
    Tel 67454700, 67494260

    It is just right behind Planet Motor. They charge only $10 for the welding. Pretty reasonable. Think it's worth to share this info with you guys.

  5. #3605
    questereq
    has no status.
    L Plate
    Join Date
    Apr 2014
    Posts
    3
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Rack for sissy bar

    Looking for one of those luggage rack that is attached to the back of the original TA 200 sissy bar. Any idea where I can buy one?

    Thanks!!!

  6. #3606
    kevinheng
    has no status.
    L Plate kevinheng's Avatar
    Join Date
    Apr 2010
    Posts
    7
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Rack for sissy bar ah boy have last week i go down he say no stock

  7. #3607
    adiva78
    has no status.
    P Plate
    Join Date
    Oct 2010
    Posts
    61
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by snookie51 View Post
    Hi guys, I have just brought my Phantom to a shop in Ubi to weld back its side stand. According to the operator, it is quite a common problem with Phantom. The shop's address is:
    Jeep Chee Trading Pte Ltd.
    Blk 3007 Ubi Road 1 #01-426
    Tel 67454700, 67494260

    It is just right behind Planet Motor. They charge only $10 for the welding. Pretty reasonable. Think it's worth to share this info with you guys.
    Thanks for the info !
    Can u elaborate on the details?
    The side stand broke and need to be welded back or the attachment for the side stand broke?
    TA's side stand are made of chromed .... it is actually a great find !
    (PS :- if you culd attached picture/s of the welded parts; it wuld be very educational!)

  8. #3608
    |squee|
    has no status.
    P Plate
    Join Date
    Sep 2006
    Posts
    120
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I'm curious, what can you do if your side stand broke off and there are no shops nearby?

    Lean it against a wall?

  9. #3609
    adiva78
    has no status.
    P Plate
    Join Date
    Oct 2010
    Posts
    61
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    U either ride to wielding WS for immediate repair.
    Or if you have someone to assist than I wuld put on a carjack or bricks under d main strut.
    The baseplate of my stand is also thinning out and I really don't want to be in this situation too.

  10. #3610
    sawfly
    flies a phantom
    Class 2A sawfly's Avatar
    Join Date
    Jun 2012
    Posts
    595
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I left the bike against the wall when the stand broke off after an accident.. Lamppost also can

    Sent from my C6903 using Tapatalk
    operate a vehicle in a way that you benefit other road users pls - and meanwhile, stop whining! be responsible and be safe.

  11. #3611
    UshioChan
    has no status.
    P Plate
    Join Date
    Jan 2013
    Posts
    90
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Just to check. Does all your phantoms slant a lot when you put it on the stand ?


    Sent from my HTC One using Tapatalk

     

     
  12. #3612
    adiva78
    has no status.
    P Plate
    Join Date
    Oct 2010
    Posts
    61
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Guess it slant quite a fair bit for stability.
    But I do see one or two that wield a rectangular plate on the base of the stand.

  13. #3613
    |squee|
    has no status.
    P Plate
    Join Date
    Sep 2006
    Posts
    120
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Mine slants quite a bit also. I've no idea how to check if the side stand is failing?

  14. #3614
    sawfly
    flies a phantom
    Class 2A sawfly's Avatar
    Join Date
    Jun 2012
    Posts
    595
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    my in the past slants enough to make parking in tight spaces a problem.. after the accident it breaks off. the angle of the rear wheel was like > 30 degres like 45 degrees that kind iirc.

    the only way is to probably look at the welding joint where the mount of the stand connects to the main frame for cracks or weird markings or rust..

    if dont want the stand to break off, try not to sit on it when the stand is deployed..
    operate a vehicle in a way that you benefit other road users pls - and meanwhile, stop whining! be responsible and be safe.

  15. #3615
    Spark_135
    is a phantom biker
    Class 2B
    Join Date
    Aug 2010
    Posts
    375
    Feedback Score
    1 (100%)
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Guys, found a long crack along the circumference of my exhaust header. Meaning around the O shape of the exhaust header there is a long crack that measures 3/4 around the O shape. I've used some exhaust repair gum paste for now. However should it fail, im looking to replace the entire pipe, since its super rusty and i think sooner or later the whole pipe will be full of holes. The pipe been rusty ever since i bought the bike. Has anyone replaced their exhaust pipe before?
    2B - 29 December 2010, one time pass
    2A - On going...

    4 May 2011 to August 2011 - Honda NSR150SP
    21 July 2012 - Honda Phantom TA200

    http://thrumylensontwowheels.blogspot.sg/

    Nikon D5000 | AF-S DX Nikkor 18-105mm f/3.5 - 5.6G VR | Vitacon 67mm UV Filter | Sigma EF-610 DG Super Flash | Yongnuo Speedlight YN560

  16. #3616
    adiva78
    has no status.
    P Plate
    Join Date
    Oct 2010
    Posts
    61
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Hi Spark, shouldn't have any problem replacing the exhaust pipe.
    As a matter of fact; I have seen a buddy disassembling it to polish the rust off.
    It is a single piece item, probably can check stock availability with LAB,everfit, fjt etc
    Good Luck

  17. #3617
    UshioChan
    has no status.
    P Plate
    Join Date
    Jan 2013
    Posts
    90
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Hey guys, just to ask,
    I am interested in buying side mirrors and handle grip on eBay, but the items sold on the international eBay, is the universal size fit our phantoms ??

    Anyone bought anything from eBay before ?

  18. #3618
    Tanarthur
    has no status.
    TeePee
    Join Date
    Mar 2006
    Posts
    3,101
    Feedback Score
    1 (100%)
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)

    Default

    Go LAB and see.. They got a lot of designs too..


    Let's just ride....
    I AM BACK!!!!!

  19. #3619
    sawfly
    flies a phantom
    Class 2A sawfly's Avatar
    Join Date
    Jun 2012
    Posts
    595
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by UshioChan View Post
    Hey guys, just to ask,
    I am interested in buying side mirrors and handle grip on eBay, but the items sold on the international eBay, is the universal size fit our phantoms ??

    Anyone bought anything from eBay before ?
    i cant remb but mirrors that they sell online usually screw on with 2 different kind of bolt sizes. i cant remb but you have to go and measure the size for phantom. spare mirros i have measures 9-10mm ish thread to thread.
    some sellers will sell their mirrors with adaptors if it doesnt fit though nicely.

    you would have to take note though mirrors sold for yamaha ones screw in an opposite direction compared to phantom.
    operate a vehicle in a way that you benefit other road users pls - and meanwhile, stop whining! be responsible and be safe.

  20. #3620
    |squee|
    has no status.
    P Plate
    Join Date
    Sep 2006
    Posts
    120
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Anyone knows what's the bulb that are used in our dashboards? I'm referring to the 3 bulbs that indicate high beam, neutral and signal. My high beam one is spoilt, thinking of replacing it myself. My OCD kicked in even though high beam is not used in Singapore.

  21. #3621
    goofy
    has no status.
    P Plate
    Join Date
    Mar 2014
    Posts
    56
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    there are three tubes pointing under the bike. what are they for? there is one that is very black looking. can i change or clean them?

     

     
  22. #3622
    sawfly
    flies a phantom
    Class 2A sawfly's Avatar
    Join Date
    Jun 2012
    Posts
    595
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by goofy View Post
    there are three tubes pointing under the bike. what are they for? there is one that is very black looking. can i change or clean them?
    2 tubes are thinner, opaque and unblocked, one of them is the carb overflow down pipe, the other one I can't recall, maybe the PCV tube. Don't have to do anything about them.

    The third thicker one is translucent and stoppered. This one is the crankcase breather tube. If filled with deposits u can just drain it off by removing the clip and stopper. Will have oil and water etc inside so prepare cloth. Must remember to stopper back after draining.
    operate a vehicle in a way that you benefit other road users pls - and meanwhile, stop whining! be responsible and be safe.

  23. #3623
    goofy
    has no status.
    P Plate
    Join Date
    Mar 2014
    Posts
    56
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    can I remove the black stopper so it can drip freely? Also my speedometer led light have been flickering what does it mean? the light want to spoil?

  24. #3624
    sawfly
    flies a phantom
    Class 2A sawfly's Avatar
    Join Date
    Jun 2012
    Posts
    595
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by goofy View Post
    can I remove the black stopper so it can drip freely? Also my speedometer led light have been flickering what does it mean? the light want to spoil?
    you can remove the black stopper to drain only. however the stopper must be in the tube when engine is running.
    (the tube is just a place for deposits to end up and designed to be a closed at the end, if you run the engine without the tube sealed im not sure how its going to screw up the crankcase pressure)

    and speedo doesnt has a LED light.. some light bulb inside that's its just a back light for the speedo. flicker maybe loose connection? unfortunately i cant comment further because the last time i tried to remove the bulb i didnt take apart the thing further.
    operate a vehicle in a way that you benefit other road users pls - and meanwhile, stop whining! be responsible and be safe.

  25. #3625
    woodlandsmen
    has no status.
    L Plate
    Join Date
    Apr 2013
    Posts
    19
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Uneven metal below th handle bar clipper

    Good morning guys. The morning rain and a jammed brake Audi caused me to Skid. Everything is okay except my handle bar is not even. By th look of it, the metal bar just below the handle bar clipper caused the unevenness. ( not th folk of handle bar ).
    I planned to take mc tomorrow cos I hurt my left knee and palm. I planned to go ubi workshop planet isit If I'm not wrong to see if they could just hammer the metal bar in place.
    Idk if it's th right thing to do, any advice from th processionals

  26. #3626
    woodlandsmen
    has no status.
    L Plate
    Join Date
    Apr 2013
    Posts
    19
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Mechanic said my my bar bend not my bar clipper, thinking of placing it with a wide bar that IS NOT TOO WIDE. Any suggestion people? The bar size, brand, and buy at where.

  27. #3627
    woodlandsmen
    has no status.
    L Plate
    Join Date
    Apr 2013
    Posts
    19
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    my friend suggested to ask the experience rider on which handle bar bring the highest level of comfort.

  28. #3628
    goofy
    has no status.
    P Plate
    Join Date
    Mar 2014
    Posts
    56
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    sawfly thank you.a lot of gunk came out.

    Can iridium ngk plugs be used for our bike?

  29. #3629
    adiva78
    has no status.
    P Plate
    Join Date
    Oct 2010
    Posts
    61
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by goofy View Post
    sawfly thank you.a lot of gunk came out.

    Can iridium ngk plugs be used for our bike?
    Yes. I think bro Matt is using one.

  30. #3630
    ahcaibiker
    loves MV Agusta
    TeePee ahcaibiker's Avatar
    Join Date
    Jan 2009
    Location
    Caucasian Bridge
    Posts
    2,033
    Feedback Score
    0
    Mentioned
    6 Post(s)
    Tagged
    2 Thread(s)

    Default

    Quote Originally Posted by goofy View Post
    sawfly thank you.a lot of gunk came out.

    Can iridium ngk plugs be used for our bike?
    can, but no point using such good plug on phantom as difference is negligible
    Class 2B - 26/03/2009
    Class 2A - 01/06/2010
    Class 3 - 10/07/2009

    Rides(s)
    1) Honda TA150 - 20/04/2009 to 31/08/2014

    2) Honda CB400 Ver S - 12/07/2014 to ???

  31. #3631
    confusehaha
    has no status.
    TeePee confusehaha's Avatar
    Join Date
    Mar 2009
    Posts
    1,578
    Feedback Score
    1 (100%)
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)

    Default

    Guys, anyone of you did valve clearance on ur bike before? If yes, any shop to recommend for the repair or adjustment? Lastly, what price should I be looking at? thanks!

    Sent from my LG-P875 using Tapatalk

    Glad to have u in my life : ) Always love one another!

     

     
  32. #3632
    iqgnos
    has no status.
    L Plate
    Join Date
    Jul 2011
    Posts
    4
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Phantom Modification - Beginner

    Hi All,

    I just bought a Phantom and would like to find out if there is any place to go for modification.

    1) Wide Handle Bar
    2) Spray Paint
    3) Change fuel tank cover or remove the Phantom logo from the sides

    Anyone has any recommendations?

    Thanks!

  33. #3633
    adiva78
    has no status.
    P Plate
    Join Date
    Oct 2010
    Posts
    61
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Welcome to Phantom Knight's,

    U can consider Ah khoon's at Bt Merah or Auntie's Champion motor at Ubi for mod actually

  34. #3634
    matthias76
    has no status.
    Class 2A matthias76's Avatar
    Join Date
    Nov 2013
    Posts
    592
    Feedback Score
    1 (100%)
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by iqgnos View Post
    Hi All,

    I just bought a Phantom and would like to find out if there is any place to go for modification.

    1) Wide Handle Bar
    2) Spray Paint
    3) Change fuel tank cover or remove the Phantom logo from the sides

    Anyone has any recommendations?

    Thanks!
    removing the logo can diy...just some heavy duty double sided tape. Spray some goo off into the gap, wait and remove.

    Spray paint need to find the shops that do it directly. Ah koon or Auntie shop may just send your bike to another shop to spray if what you have in mind is too extensive.

    Sent from my GT-I9506 using Tapatalk

  35. #3635
    ahch0ng
    has no status.
    Class 2A ahch0ng's Avatar
    Join Date
    Oct 2010
    Posts
    623
    Feedback Score
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by sawfly View Post
    >>added drive chain roller

    *Rear brake light relay wiring $12 @ Lee Huat Motor, near 10 Mile Junction
    *Speedo Cable $17 @ Lee Huat
    * Fuel Sensor $40 (Planet) custom 4 & above
    * Battery $38 Yuasa / $38(plug and play) (LAB) / $35 (Planet) / $48 (Ah Koon) / $60 woodlands road carltex (7Ah battery)
    * Steering cone $55-65
    * Cam Chain Tensioner $55-60 (for tick tick sound at cold start)
    * Cam Chain Tensioner + Cam Chain + Gaskets + O-Rings + Chex 9000 EO = $277 (Eng Sin Motor - cck ave 1)
    * Front brake disc $45
    * Tyres (metz lasertec) $160 front & back (Planet) / $170 (HKL) / $155 (Unique Motorsports) / $130 (LAB)
    * Rear Tyre (Metz) $90 @ (Planet) / $89 (HKL)

    * Chain $70-120 depending on type
    * Chain + Sprocket - $140+/-
    * DID O RING with Original Honda Sprocket - $130 (Planet)
    * Chain roller (without screw insert) - $5 (LAB)

    * Signal lights - depending on which type you like. $8-25.
    * Signal bulb, headlight bulb - 1 $ (LAB, easy DIY) (add on: approved brighter ones for $8. bought from koon.)
    * Brake light bulb - $2 (Planet)
    * Speedo BackLight + Workmanship (Planet) - S$2
    * Headlight - anywhere from $35 to 90 depending the type you like
    * Spark plug - $2-20 [[ Replay once had his changed for S$2 ]]
    * Engine oil - $6 -18 (jB got his lousiest EO for $3)
    * Brake Pad $15-25
    * Bleed and change brake fluid($10 each side)
    * Air filter - $10 <- LAB (can buy and DIY)
    * K&N Air filter $85 (Unique Motorsports)
    * Wheel ball bearings - $20-35 (depends on how mech chop u) jtzx: change for only $5 at planet
    * Gear Shaft - $100 (planet)
    * Clutch plate - $80 (Planet)
    * Front fork (1 pair) - $330 (planet)
    * Front fork seals (plus fork oil of course) - $65 (planet)
    * Front fork tube (1 x) - $30 (planet) $60 x 01 now
    * Rectifier - $75(new) $25(2nd hand) (planet)
    * Coil - $180 (planet)
    * Rethreading of spark plug thread - between $35 - $45.
    * Gasket - $30 (koon)
    * Gasket @ Exhaust - $25 (Planet)
    * Starter carbon - $60 (planet)
    * Started Relay - $80 (Eng Sin Motor - cck ave 1)
    * Front fender - $45 (original honda) ($28 at ah boy, DIY 4 screws only)
    * Rear brake plate w/ pad $58 (planet)
    * Rear brake disc - $80 (planet)
    * Original rear suspension $180 (planet)
    * Repair front brake pump (jam) and replace brake oil -$25 - (planet)
    * Front brake pump - $50 (Unique motorsport) $70 08/11
    * Front brake rebuild - $35 08/11
    * Rear Brake Pump ($85) (planet)
    * Overhaul: Piston+Ring+Block+Top gasket+EO+Plug - ($380) - (planet)
    * Rear brake light 12 v 5w/18w $1 (planet)

    * Clutch cable - $15 (planet) / $20 (ah koon)
    * Throttle cable - $12 (planet)
    * Front Brake/Clutch Lever - $8 each(planet)
    * Balancer [the 2 silver thingies at the edge of your handlebars] - $15 (planet)
    * Front fender -$45 (AMK HL motors)
    * Spark plug cap - $18 (planet)
    * regina gold chain, front & rear honda sprockets with installation at ah boy
    * air suction valve - $60
    * front brake pump + caliper + brake fluid - $60 (planet)
    * side stand(2nd hand) (ong's motor at midview building) - $10 / brand new $20 (upper thomson road spc)
    * Choke replacement - $18 (planet)
    * Carb Adjustment screw + washers + spring - $9 (2nd hand at workshop along cck ave 1)
    *IU unit base plate... for attaching to handbar.$20 (Jalan Bukit merah workshop)
    *Chain roller guide - $5 DIY (buy from Eversuccess at Lembu Rd)
    *Speedo casing rubber lining - $10 (Eng Sin Motor - cck ave1)
    *Chain Guard - $30 (Eversuccess)
    *Service Front Brake Caliper and change Brake Seal (4 x Oring) $45
    * Coolant reservoir (TA 150) $28 @ Planet

    Mods and Accessories:

    * Steel brake Line 1 pc - SGD $80 (unique motors)
    * Respray of bike, (front/rear mudguard + Tank) single color - $180 (H L Cycle)
    * Wide handlebar (custom4 phantom type) - $38
    * Wide Crashbar with mounting points for spotlights - $80
    * Big Footrest - $60 madman - Pinkphantom.com
    * Front\Rubber part - $5/piece @LAB
    * Front\Metal base plate - $12/piece @LAB
    * Rear\Eagle footrest - $25/pair @ LAB (just bought today, now is $30)
    * Side box e21 - $90-180 / $180 as of April 2010 from LAB
    * Zeus box 48L - $110 (Koon)
    * Fuel tank - $382 contact madman or check http://www.pinkphantom.com/estore06.html
    * Spotlights $35 a pair http://www.pinkphantom.com/estore11a.html
    * Windshield $65-80
    * Grips $10-120
    * Chrome w/ rubber strips grips (LAB) - $25
    * Mirrors $12(LAB) - $50 (jB got his, 8 bucks for small ones)
    * Look-alike-original mirrors (shop beside LAB) - $20, LAB should be cheaper.
    * small foldable square mirror - $45 (HKL)
    * Saddlebags $98-190 madman - Pinkphantom.com
    * Hazard light less than $10 if u fix&wire urself, $18-20 for mech installation [[ S$15 if Replay does it for you! ]]
    * Relocating rear signals to license plate - $10 (planet)
    * Relocating rear signals to license plate with bracket - $28 (LAB)
    * Rear box $80-330
    * Voltage stabiliser - $59-$120 depends
    * Rider's ORIGINAL footrest (LAB) - S$18 per side, can be cheaper?
    * Stainless steel screws for speedo, and side covers. 6 to change altogether. $1-$1.80 also bought from koon.
    * washers to go at 50c each at regina
    * Socket for supporting the head light - $15
    * Bullet Headlight - $35 (LAB)
    * Gear lever with rubber $20 at koon
    * Chrome gear and brake levers set - madman
    * Stebel Magnum 2 (Silver) w/o installation - $18-$20 (LAB)
    * Daiso electric horns (pair) - $45 (planet)
    * Phantom TA 200 gearbox - $540 (planet)
    * Front fender the "mudflap"- $20 at koon
    * Stebel Electric horn with nice hidden installation under front chrome cover- at koon $38
    * Re-wrap seat- Starts from about $38 from Eugene saddledry, $25 basic one from Auntie Shop
    * Spotlights on crashbar with installation- $35 at koon
    * Crashbar- $65 from ah boy DIY
    * Anchor and wide type crashbar - madman
    * rear no. plate $10..first shop opposite rov..ubi
    * 6" Risers - $80 from Auntie Shop in Ubi
    requote for awareness

  36. #3636
    sawfly
    flies a phantom
    Class 2A sawfly's Avatar
    Join Date
    Jun 2012
    Posts
    595
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    moaaar updates in bold

    *Rear brake light relay wiring $12 @ Lee Huat Motor, near 10 Mile Junction
    *Speedo Cable $17 @ Lee Huat
    * Fuel Sensor $40 (Planet) custom 4 & above
    * Battery $38 Yuasa / $38(plug and play) (LAB) / $35 (Planet) / $48 (Ah Koon) / $60 woodlands road carltex (7Ah battery)
    * Steering cone $55-65
    * Cam Chain Tensioner $55-60 (for tick tick sound at cold start), 65
    * Cam Chain Tensioner + Cam Chain + Gaskets + O-Rings + Chex 9000 EO = $277 (Eng Sin Motor - cck ave 1)
    * Cam chain: 80sgd, not incl left crank case cover gasket, cam chain sprocket cover o ring and gasket
    * Front brake disc $45
    * Tyres (metz lasertec) $160 front & back (Planet) / $170 (HKL) / $155 (Unique Motorsports) / $130 (LAB)
    * Rear Tyre (Metz) $90 @ (Planet) / $89 (HKL)

    * Chain $70-120 depending on type
    * Chain + Sprocket - $140+/-
    * DID O RING with Original Honda Sprocket - $140 (Planet)
    * Chain roller (without screw insert) - $5 (LAB)

    * Signal lights - depending on which type you like. $8-25.
    * Signal bulb, headlight bulb - 1 $ (LAB, easy DIY) (add on: approved brighter ones for $8. bought from koon.)
    * Brake light bulb - $2 (Planet)
    * Speedo BackLight + Workmanship (Planet) - S$2
    * Headlight - anywhere from $35 to 90 depending the type you like
    * Spark plug - $2-20 [[ Replay once had his changed for S$2 ]]
    * Engine oil - $6 -19 (jB got his lousiest EO for $3)
    * Brake Pad $15-25
    * Bleed and change brake fluid($10 each side)
    * Air filter - $10 <- LAB (can buy and DIY); original honda air filter, $16
    * K&N Air filter $85 (Unique Motorsports)
    * Wheel ball bearings - $20-35 (depends on how mech chop u) jtzx: change for only $5 at planet
    * Gear Shaft - $100 (planet)
    * Clutch plate - $80 (Planet)
    * Front fork (1 pair) - $330 (planet)
    * Front fork seals (plus fork oil of course) - $65 (planet)
    * Front fork tube (1 x) - $30 (planet) $60 x 01 now
    * Rectifier - $75(new) $25(2nd hand) (planet)
    * Coil - $180 (planet), original $220
    * Rethreading of spark plug thread - between $35 - $45.
    * left crankcase oil seal behind drive chain primary sprocket: $15
    * Gasket - $30 (koon)
    * Gasket @ Exhaust - $25 (Planet)
    * Starter carbon - $60 (planet)
    * Started Relay - $80 (Eng Sin Motor - cck ave 1)
    * Front fender - $45 (original honda) ($28 at ah boy, DIY 4 screws only)
    * Rear brake plate w/ pad $58 (planet)
    * Rear brake caliper assembly, incl mounting bracket, honda original - $155 (planet)
    * Rear brake disc - $80 (planet)
    * Original rear suspension $180 (planet)
    * Repair front brake pump (jam) and replace brake oil -$25 - (planet)
    * Front brake pump - $50 (Unique motorsport) $70 08/11
    * Front brake rebuild - $35 08/11
    * Rear Brake Pump ($85) (planet)
    * Overhaul: Piston+Ring+Block+Top gasket+EO+Plug - ($380) - (planet)
    * Rear brake light 12 v 5w/18w $1 (planet)

    * Clutch cable - $15 (planet) / $20 (ah koon)
    * Throttle cable - $12 (planet)
    * Front Brake/Clutch Lever - $8 each(planet)
    * Balancer [the 2 silver thingies at the edge of your handlebars] - $15 (planet)
    * Front fender -$45 (AMK HL motors)
    * Spark plug cap - $18 (planet)
    * regina gold chain, front & rear honda sprockets with installation at ah boy
    * air suction valve - $60
    * front brake pump + caliper + brake fluid - $60 (planet)
    * side stand(2nd hand) (ong's motor at midview building) - $10 / brand new $20 (upper thomson road spc)
    * Choke replacement - $18 (planet)
    * Carb Adjustment screw + washers + spring - $9 (2nd hand at workshop along cck ave 1)
    *IU unit base plate... for attaching to handbar.$20 (Jalan Bukit merah workshop)
    *Chain roller guide - $5 DIY (buy from Eversuccess at Lembu Rd)
    *Speedo casing rubber lining - $10 (Eng Sin Motor - cck ave1)
    *Chain Guard - $30 (Eversuccess)
    *Service Front Brake Caliper and change Brake Seal (4 x Oring) $45
    * Coolant reservoir (TA 150) $28 @ Planet

    Mods and Accessories:

    * Steel brake Line 1 pc - SGD $80 (unique motors)
    * Respray of bike, (front/rear mudguard + Tank) single color - $180 (H L Cycle)
    * Wide handlebar (custom4 phantom type) - $38
    * Wide Crashbar with mounting points for spotlights - $80
    * Big Footrest - $60 madman - Pinkphantom.com
    * Front\Rubber part - $5/piece @LAB
    * Front\Metal base plate - $12/piece @LAB
    * Rear\Eagle footrest - $25/pair @ LAB (just bought today, now is $30)
    * Side box e21 - $90-180 / $180 as of April 2010 from LAB
    * Zeus box 48L - $110 (Koon)
    * Fuel tank - $382 contact madman or check http://www.pinkphantom.com/estore06.html
    * Spotlights $35 a pair http://www.pinkphantom.com/estore11a.html
    * Windshield $65-80
    * Grips $10-120
    * Chrome w/ rubber strips grips (LAB) - $25
    * Mirrors $12(LAB) - $50 (jB got his, 8 bucks for small ones)
    * Look-alike-original mirrors (shop beside LAB) - $20, LAB should be cheaper.
    * small foldable square mirror - $45 (HKL)
    * Saddlebags $98-190 madman - Pinkphantom.com
    * Hazard light less than $10 if u fix&wire urself, $18-20 for mech installation [[ S$15 if Replay does it for you! ]]
    * Relocating rear signals to license plate - $10 (planet)
    * Relocating rear signals to license plate with bracket - $28 (LAB)
    * Rear box $80-330
    * Voltage stabiliser - $59-$120 depends
    * Rider's ORIGINAL footrest (LAB) - S$18 per side, can be cheaper?
    * Stainless steel screws for speedo, and side covers. 6 to change altogether. $1-$1.80 also bought from koon.
    * washers to go at 50c each at regina
    * Socket for supporting the head light - $15
    * Bullet Headlight - $35 (LAB)
    * Gear lever with rubber $20 at koon
    * Chrome gear and brake levers set - madman
    * Stebel Magnum 2 (Silver) w/o installation - $18-$20 (LAB)
    * Daiso electric horns (pair) - $45 (planet)
    * Phantom TA 200 gearbox - $540 (planet)
    * Front fender the "mudflap"- $20 at koon
    * Stebel Electric horn with nice hidden installation under front chrome cover- at koon $38
    * Re-wrap seat- Starts from about $38 from Eugene saddledry, $25 basic one from Auntie Shop
    * Spotlights on crashbar with installation- $35 at koon
    * Crashbar- $65 from ah boy DIY
    * Anchor and wide type crashbar - madman
    * rear no. plate $10..first shop opposite rov..ubi
    * 6" Risers - $80 from Auntie Shop in Ubi
    Last edited by sawfly; 06-09-2014 at 10:18 PM.
    operate a vehicle in a way that you benefit other road users pls - and meanwhile, stop whining! be responsible and be safe.

  37. #3637
    ZenMan
    has no status.
    L Plate
    Join Date
    Jan 2014
    Posts
    48
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    The price for the respray at H L Cycle need to update le.

    http://www.singaporebikes.com/forums...inting-enquiry

    Their own H L Cycle thread state for Class 2B bike (TA200) 1 colour $260 onwards.

    Anyone knows the price for single colour respray at Ah Khoon or Auntie?

  38. #3638
    bobokw
    has no status.
    L Plate
    Join Date
    Feb 2013
    Posts
    47
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Anyone have this problem, the slight feeling of deceleration when your bike is running out of petrol, but the problem is i refueled, it's happening for about 2 days already. Freaked me out on the highway thinking it's gonna die.

  39. #3639
    j
    has no status.
    Class 2 j's Avatar
    Join Date
    Jan 2006
    Posts
    1,304
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    guys, can bullet headlight and straight handlebar pass inspection?

    i know its best to have the oem fixed back to pass. but just asking if anyone tried before? thanks

  40. #3640
    Silent Hunter
    has no status.
    SBF Lacer Silent Hunter's Avatar
    Join Date
    Jun 2007
    Location
    Singapore, Yishun
    Posts
    5,133
    Feedback Score
    4 (100%)
    Mentioned
    18 Post(s)
    Tagged
    2 Thread(s)

    Default

    Bullet headlight passed this year.

    But I have been going to the same VICOM center for years and the bike already had the bullet headlight waaaay before some smart alec thought of using camera to check for modifications.
    Motorcyclist are the nicest people on the road, try not to kill us.

  41. #3641
    j
    has no status.
    Class 2 j's Avatar
    Join Date
    Jan 2006
    Posts
    1,304
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    nice bro, gonna try my luck i guess.. haha

     

     
  42. #3642
    goofy
    has no status.
    P Plate
    Join Date
    Mar 2014
    Posts
    56
    Feedback Score
    1 (100%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    anyone know how much is the rider's foot rest rubber or where to buy?

  43. #3643
    wywsyy
    - wash
    P Plate
    Join Date
    Oct 2011
    Location
    boonlay
    Posts
    111
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    i changed the whole thing (rubber plus the metal) $13 at heng motor @ toh guan, duno they only sell the rubber or not

  44. #3644
    j
    has no status.
    Class 2 j's Avatar
    Join Date
    Jan 2006
    Posts
    1,304
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    any idea if the scrapyard sells stock cosmetic items? such as the stock headlight, stock mirrors, stock signal lights etc... wanna convert my bike back to stock

  45. #3645
    matthias76
    has no status.
    Class 2A matthias76's Avatar
    Join Date
    Nov 2013
    Posts
    592
    Feedback Score
    1 (100%)
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by j View Post
    any idea if the scrapyard sells stock cosmetic items? such as the stock headlight, stock mirrors, stock signal lights etc... wanna convert my bike back to stock
    They have plenty. But conditions are far from desirable. Best if you know the price for original so that you can bargain properly when you are there.

  46. #3646
    nadxcat
    has no status.
    L Plate
    Join Date
    Jun 2010
    Posts
    30
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by bobokw View Post
    Anyone have this problem, the slight feeling of deceleration when your bike is running out of petrol, but the problem is i refueled, it's happening for about 2 days already. Freaked me out on the highway thinking it's gonna die.
    Hi, hope u had phantom check already. Sounds consistent, my guess is that clutch/gear box needs to be check, clutch/gear is slipping.

  47. #3647
    ber
    has no status.
    Class 2A
    Join Date
    Jun 2013
    Posts
    665
    Feedback Score
    0
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)

    Default

    edit deleted.
    Last edited by ber; 15-10-2014 at 04:33 PM.

  48. #3648
    The Gentlemen
    has no status.
    L Plate
    Join Date
    Oct 2013
    Posts
    5
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Hi guys, i just bought a phantom ta200 yesterday and i would like to know which shop can go to mod my bike. plan to do old school chopper kind of mod. Within the legal limit of course. =)

  49. #3649
    matthias76
    has no status.
    Class 2A matthias76's Avatar
    Join Date
    Nov 2013
    Posts
    592
    Feedback Score
    1 (100%)
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Congratulations! Aunty@Ubi, Bike Fabricator, or simply DIY also can. You bought Gen 1 or Gen 2 bike?

  50. #3650
    The Gentlemen
    has no status.
    L Plate
    Join Date
    Oct 2013
    Posts
    5
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    My exhaust pipe is the straight one similar like shadow. I'm guessing mine is gen 2. What about parts and accessories? Can get at aunty @ ubi? My current bike footpegs are beyond saving. Looking to replace them with either original parts or perhaps kuryakyn if able to fit.

Page 73 of 76 FirstFirst ... 23636970717273747576 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •