Hey, my old bike is up for sale by the same buyer that I sold it to just over 2 years ago.
http://www.singaporebikes.com/used_b...street_triple/
You must be sad to have to let it go Anthony.
Advertisement |
|
Hey, my old bike is up for sale by the same buyer that I sold it to just over 2 years ago.
http://www.singaporebikes.com/used_b...street_triple/
You must be sad to have to let it go Anthony.
Forever the Foreigner
Hi. I just got a 08 street triple.
Just check with u guys,
1) is it the bike will vibrate a lot ?
2) is it common for the bike engine cover( that area) the pain work will peel off due to the heat?
3) and the bike is it quite quite hot ??
Hope someone will reply. Cheer !
|
||
Anyway. Other than Mah motor. Is there any other shop can recommend??
1) The bike does vibrate but really depends on what you compare to.
2) The paint work at the engine area does bubble but mine have not reach the stage of peeling off. Mine is 2009
3) Bike is not hot.
Getting my str10 next month ! Can't wait to bring him out on the road í ˝í¸ť
yeah mine also have....like a tiak-tiak-tiak sound right?
I tell u how to make it dissapear.....Rev it up ahhahaha above 6k...then no more sound only intake sound. hahaha
ST 2013 version
|
||
Just got my 2010 st. Fun bike. Hope to see you guys ok the road soon
Hi.
I bought the bike second hand from Mah in 2009, the Zard cans were already installed.
Forever the Foreigner
Thanks bro. So what's your ride now?
This thread seems quite dead lately
Sent from my iPhone using Tapatalk
JOSHUA
class2B -26/2/09
class 2A -27/7/10
class 3 - 6/1/11
class 2 - 30/8/12
Hi.
I ride an MT-09 ABS.
Just need another 12 points and its bye bye license - hello MRT, Bus and Taxi.
Yes, quite quiet in here.
Forever the Foreigner
Not bad. I saw your old ride on CTE earlier. Not badđź‚
Sent from my iPhone using Tapatalk
JOSHUA
class2B -26/2/09
class 2A -27/7/10
class 3 - 6/1/11
class 2 - 30/8/12
Most of the guys are active in our own watsapp group
Any idea how to adjust the clutch switch or bypass it? It gets worst as the day goes. Having problems starting bike sometimes. Need to find the sweet spot of the clutch switch
Sent from my iPhone using Tapatalk
JOSHUA
class2B -26/2/09
class 2A -27/7/10
class 3 - 6/1/11
class 2 - 30/8/12
|
||
Hello all ST riders! Newbie here, just got my 2009 675 a few months.
It's pretty much all stock but I'm looking for aftermarket exhaust. Anyone knows any lobangs?
hi all.. I'm a new ST rider as well.. would love to hook up as well! staying in the east..
Sent from my SM-G935F using Tapatalk
Hi , such a fun bike but its undervalued for its worth.
Kindly PM me the watsapps grp , thanks
Assalamualaikum/Hello to fellow bikers...
Price : $19.90 Only with installation !!!LOWEST PRICE IN CAROUSELL !!!
100% Genuine Made In USA.
Over 400 pairs were sold !!!
PROMOTION !!!
Buy 2 pairs and above at $18/= per pair only !!! Purchase 4 pairs and above and enjoy free delivery + installation..
Contact me at 83885695 (Wan)
Pls check my listing at Carousell :
https://carousell.com/grabongrip
* 100 pairs sold in a month !! Customers who bought it, recommended to their friends coz this product WERKZ !!!
A MUST HAVE for your daily ride !!
-----------------------------------
- Grab On Grip covers reduce vibration and give you a softer feel, reducing hand and wrist fatigue, so you won't have that tingly feeling in your hands after a long ride.
- There are riders riding sportbikes with low handle bars, complain of sore palms from leaning on the grips for so long. With Grab On Grip covers, these problems will be a thing of the past !!!
- Grab On Grip covers allow you to ride in more comfort, especially on those long rides. PERFECT for the daily commuter, tour rider, and sport riders alike.
Features
---------
- Slip over existing grips for greater comfort, or to renew worn grips.
- Work with heated or standard grips.
- Save $$$, no need change the whole heater grip system which is very costly.
- Shock absorbing EPDM foam for a smoother ride.
- Provide comfort to wrist and palm. (Great for touring !!)
- Glove friendly.
- Extra durable, ozone, UV, gas and oil resistant
- Grip Covers MC402/width 1.25-1.45"/5"Length.
** Fits class 2, 2A, 2B bikes as long as its a standard grip, it can fit .
** There's customers that bought and fit it on their bicycles too !!!
Great for city riding where there's lots of traffic light, your hand will be tired during the on going "stop go" situation, this product will help to ease the stress on palm n wrist. Highly recommended for despatch/delivery riders.
"Once you try it, you'll LOVE it"
NOTE : Lot of customers been asking what's the difference between Grab On Grip with another brand that's selling @ $30-$35.
Ans :
- 1st of all, Grab on Grip is Made in USA while the other grip is Made in UK. So the difference in currencies. USD vs Pound Sterling
- Difference in QUALITY. No doubt both are EPDM Foam but customers that have used Grab On Grip and have tried the "other brand", eventually came back to use Grab On Grip. Customers claimed that the "other brand" became smelly after using it for awhile and it tends to slip to the balancer causing the throttle to "stuck" which is VERY DANGEROUS. They have never face this problem when using Grab On Grip. Well, expensive things doesn't mean its good.
- Some customers asked how come mine is "cheaper" than the rest ?
Ans : There's no need for me to claim i'm the "dealer/distributor" when the product i sell is 100% Genuine Made in USA.. As a biker, I wanted to share my great experience of using this product for more than 5 years at an affordable price.
------------------------------------
Tags : BMW - All models. Ducati - All Models. KTM - All Models. Harleys (Only if its standard grips. Those oversize grips, can't fit). Triumph - All models. Moto Guzzi, Reiju, Kawasaki - All models. Honda - All models. Yamaha - All models. Phantom, RXZ, Piaggio Vespa Gilera, Motard, Scramblers, Kups.
Attachment 337217
Attachment 337218
Attachment 337219
Attachment 337220
Attachment 337221
Attachment 337222
#GrabOnGrip #GOG
"Shut Up n Ride"
hi can PM me the whatsapp group? thanks
its been so long...
ForBidDen 26
Has anyone tried on a different handle bar for their striple ? I am looking for something a bit more leaned forward but not clip ons like aggressive
No. so far so good for stock. What sort of bar you looking into? Those on DRZ??
Sent from my iPhone using Tapatalk
JOSHUA
class2B -26/2/09
class 2A -27/7/10
class 3 - 6/1/11
class 2 - 30/8/12
Actually i don't exactly know. I have seen a few on triumph forums when i searched. What i want is a way to lean a bit more forward since i have been riding sport bikes all my life before. When i corner the striple, i am still not super comfy with my body position. I sat on a daytona and that thing has super aggresive riding position
|
||
Personally after riding quite a few bike, STR has quite a balance weight ratio.
MT09 the rear seems lower for example.
Sent from my iPhone using Tapatalk
JOSHUA
class2B -26/2/09
class 2A -27/7/10
class 3 - 6/1/11
class 2 - 30/8/12
Hey Guys,
I am looking to swap my Ohlins rear shock for a stock suspension, model should fit 2008 to 2012 Street triple,
please contact me if interested. Thanks 93673381
its been so long...
Hi all, own a striple'13 model. Anyone know how much to change tpms battery?
Sent from my LG-H990 using Tapatalk
Hello team!
Just bought my Triple last Saturday and loving it. Could some PM me the WA group?