Wiring diagram

[hawk77]

I have draft a wiring diagram to combine the Existing Light with the Electra Glo. Anyone can help to check will it work or will it cause short circuit?

1. Can I join both the Negative wire from Existing Light with the Electra Glo together?
2. Can I combine the two Electra Glo wires and connect to Existing Light Brake and Running separately?



Existing light
Red (Brake) / White (Positive) / Green (Turn) / Black (Negative)


Electra Glo
Purple (Three LEDs lighted on the left) / Black & Green (Negative) / Purple & White (Three LEDs lighted on the right)

[hawk77]

Electra Glo
Purple (Three LEDs lighted on the left) / Black & Green (Negative) / Purple & White (Three LEDs lighted on the right)

[hawk77]

I bought the Electra Glo. It is originally for Touring model, I want to install on my Dyna.



My existing rear light wiring are:
Red (Brake) / White (Positive) / Green (Turn) / Black (Negative)




The Electra Glo has six LEDs on each lamp, I tested one of the lamp using a 9v battery
Purple (Three LEDs lighted on the left) / Black & Green (Negative) / Purple & White (Three LEDs lighted on the right)




I have draft a wiring diagram, thinking to combine my existing rear light with the Electra Glo. To check will it work or will it cause short circuit?

1. Can I join both the Negative wire from existing rear light with the Electra Glo together?
2. Can I combine the two Electra Glo wires and connect to existing rear light Brake and Running separately?

[hawk77]

Posted the question here:
https://www.hdforums.com/forum/touri...ectra-glo.html

[pufferfis]

Since you are tapping from current wires...how abt you use positaps to tap to the different wires...that way if you find it didnt light up ,you must have attach it to the wrong wire......also if you do decide to take out the electra glo wires....you can reseal the bike original wires with super glue....and you do not cut any wires....

forgive me if I'm wrong...but the running wire is the wire which keep the lights on is it not?....personally I would keep the brake and running lights wires separate as for me thats the original wiring... ......also I do not know how to modify electrical diagram but just to attach to existing wires....