User Tag List

Results 1 to 5 of 5

Thread: Wiring diagram

  1. #1
    hawk77
    has no status.
    Class 2B hawk77's Avatar
    Join Date
    Sep 2003
    Posts
    212
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Wiring diagram



    I have draft a wiring diagram to combine the Existing Light with the Electra Glo. Anyone can help to check will it work or will it cause short circuit?

    1. Can I join both the Negative wire from Existing Light with the Electra Glo together?
    2. Can I combine the two Electra Glo wires and connect to Existing Light Brake and Running separately?



    Existing light
    Red (Brake) / White (Positive) / Green (Turn) / Black (Negative)


    Electra Glo
    Purple (Three LEDs lighted on the left) / Black & Green (Negative) / Purple & White (Three LEDs lighted on the right)

  2. #2
    hawk77
    has no status.
    Class 2B hawk77's Avatar
    Join Date
    Sep 2003
    Posts
    212
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Electra Glo
    Purple (Three LEDs lighted on the left) / Black & Green (Negative) / Purple & White (Three LEDs lighted on the right)

     

     
  3. #3
    hawk77
    has no status.
    Class 2B hawk77's Avatar
    Join Date
    Sep 2003
    Posts
    212
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I bought the Electra Glo. It is originally for Touring model, I want to install on my Dyna.



    My existing rear light wiring are:
    Red (Brake) / White (Positive) / Green (Turn) / Black (Negative)




    The Electra Glo has six LEDs on each lamp, I tested one of the lamp using a 9v battery
    Purple (Three LEDs lighted on the left) / Black & Green (Negative) / Purple & White (Three LEDs lighted on the right)




    I have draft a wiring diagram, thinking to combine my existing rear light with the Electra Glo. To check will it work or will it cause short circuit?

    1. Can I join both the Negative wire from existing rear light with the Electra Glo together?
    2. Can I combine the two Electra Glo wires and connect to existing rear light Brake and Running separately?

  4. #4
    hawk77
    has no status.
    Class 2B hawk77's Avatar
    Join Date
    Sep 2003
    Posts
    212
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

  5. #5
    pufferfis
    Its CLOBBERING TIME!
    Class 2 pufferfis's Avatar
    Join Date
    Sep 2002
    Location
    StUcK iN bOrInG SiNgApOrE...hAiYaHHHHHH
    Posts
    1,495
    Feedback Score
    1 (100%)
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)

    Default

    Since you are tapping from current wires...how abt you use positaps to tap to the different wires...that way if you find it didnt light up ,you must have attach it to the wrong wire......also if you do decide to take out the electra glo wires....you can reseal the bike original wires with super glue....and you do not cut any wires....

    forgive me if I'm wrong...but the running wire is the wire which keep the lights on is it not?....personally I would keep the brake and running lights wires separate as for me thats the original wiring... ......also I do not know how to modify electrical diagram but just to attach to existing wires....
    I ride at 70km/hr only...please please dont blow2 at me or overtake me dangerously....wait i change into Incredible Hulk n dont know why my little baby bike will always be ahead of u if u do that

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •