User Tag List

Page 6 of 6 FirstFirst ... 23456
Results 251 to 268 of 268

Thread: Paint For Rusty Exhaust

  1. #251
    le_stann
    has no status.
    P Plate
    Join Date
    Jan 2007
    Location
    Central Bishan
    Posts
    132
    Feedback Score
    2 (100%)
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default



    Quote Originally Posted by Spark_135 View Post
    hey guys. I read from my SP manual that if i remove the entire pipe and want to install back, its a must to replace the gasket. So if i take out the entire pipe to spray black, is it really a must to replace the gasket even if its in good condition?
    I have removed my pipes on my Yamaha a couple of times .. Gaskets not changed. Can probably still function , manufacturers and manuals always play it safe and are afraid that you might damage (slight tear or wear/tear) gaskets when removing.

    Will leak and cause temperature to feel hotter at the groin area when you stop at traffic lights and such but would not cause much damage unless it gets so hot that it melts your electrical wires or fuel lines- worst case scenario. But it gap got to be pretty big, which you would be able to see, to cause this kind of damage.

    I would say it would be okay to remove a few times before replacing them depending on how comfortable you feel like doing. Anyway they are pretty cheap $3/4 should be enough I guess.
    Last edited by le_stann; 16-08-2011 at 08:45 PM.
    Doing everything DIY that I can now.. Judging by the way things are rite now , it is for the best..
    Makes you stronger and less dependent on bike shops.
    Encourage others to do likewise and help new riders identify fair deals online~ thus making direct seller to buyer purchases.
    Its the only way we can push the motorcycle industry in Singapore forward.

  2. #252
    AmericanBornMalay
    has no status.
    L Plate
    Join Date
    Jan 2012
    Posts
    23
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    How much for bike spray

     

     
  3. #253
    exwhyzee
    doesnt need a status.
    Class 2B exwhyzee's Avatar
    Join Date
    Feb 2012
    Location
    Woodbridge
    Posts
    345
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    anyone up for a DIY pipe-spraying session? my s4 headers are infested with rust!

  4. #254
    guanjie
    has no status.
    Class 2 guanjie's Avatar
    Join Date
    Nov 2006
    Location
    Kovan
    Posts
    894
    Feedback Score
    0
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default

    After reading up on several articles on rust removing i think this is the easiest way out -
    http://www.ducatimonsterforum.org/in...?topic=43917.0

    160207 - 170407: Honda NSR SP150
    230507 - 140807: Aprilia RS125 '99
    300712 - 290113: Ducati Monster 400 '02
    050213 - 190413: Honda CBR 400RR '96

    090413 - Present: BMW 316i '12

    Why fear the silence when it's already so noisy - Gj

  5. #255
    ezzyoiler
    has no status.
    TeePee
    Join Date
    Mar 2010
    Location
    Tampines st 83
    Posts
    1,964
    Feedback Score
    2 (100%)
    Mentioned
    27 Post(s)
    Tagged
    2 Thread(s)

    Default

    real hot..paints ........................
    i love my ezzyoiler
    experience the miracle...
    where chain cleaning is history...
    call 91797182..

  6. #256
    Billemans
    has no status.
    P Plate
    Join Date
    Oct 2010
    Posts
    117
    Feedback Score
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    I always used to spray over the rust, let it stay there for about an hour and then drive with the bike for a small distance. It heats and dries the paint superfast and makes it stronger. Do read the instruction on the spray can first.

  7. #257
    Keoni
    has no status.
    P Plate
    Join Date
    Jul 2013
    Location
    North
    Posts
    178
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Has anyone tried using coke to get rid of rust? It works. Seriously. I didn't believe it despite all the videos I've watched, until I tried it myself on my header pipe.
    Pour coke over rusted part, let it sit for about a minute, use sponge or cloth to rub away the rust. Pour more coke as you rub, keep it wet.
    I used half a small bottle of coke for my pipe. And it works better than sandpaper.
    Honda CG145, Honda CB150R ExMotion. And a few others in between...

  8. #258
    technicolorhighway
    making slow bike fast
    Class 2 technicolorhighway's Avatar
    Join Date
    Aug 2007
    Posts
    1,396
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by Keoni View Post
    Has anyone tried using coke to get rid of rust? It works. Seriously. I didn't believe it despite all the videos I've watched, until I tried it myself on my header pipe.
    Pour coke over rusted part, let it sit for about a minute, use sponge or cloth to rub away the rust. Pour more coke as you rub, keep it wet.
    I used half a small bottle of coke for my pipe. And it works better than sandpaper.
    I will try.
    Do tell was there a re occurrence?

    making slow bikes go faster via mobile
    There's more fun in making slow bike go fast than making a fast bike faster FOR SALE KAWASAKI ZEPHYR EBC BRAKE PADS FA129HH.DUC CLUTCH SLAVE PUMP,SIGNAL RELAY.

  9. #259
    Hydher
    Is selling his GSXR1000
    SBF Phantom Knights Hydher's Avatar
    Join Date
    May 2008
    Posts
    3,551
    Feedback Score
    1 (100%)
    Mentioned
    32 Post(s)
    Tagged
    1 Thread(s)

    Default

    Quote Originally Posted by Spark_135 View Post
    hey guys. I read from my SP manual that if i remove the entire pipe and want to install back, its a must to replace the gasket. So if i take out the entire pipe to spray black, is it really a must to replace the gasket even if its in good condition?
    good practise but not a must. Inspect the gasket for leaks
    Dragstar 400 classic & Zx6r

  10. #260
    Keoni
    has no status.
    P Plate
    Join Date
    Jul 2013
    Location
    North
    Posts
    178
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    [QUOTE=technicolorhighway;8024015]I will try.
    Do tell was there a re occurrence?

    I think it only removes the rust but won't prevent rust from forming again over time.
    Honda CG145, Honda CB150R ExMotion. And a few others in between...

  11. #261
    magnitude
    has no status.
    P Plate
    Join Date
    May 2012
    Posts
    114
    Feedback Score
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Anyone here knows where to find high heat primer? I want to apply before spraying high heat spray for better adhesion. Spraying my motorcycle exhaust. Is it necessary to have primer?

     

     
  12. #262
    ddjh9
    has no status.
    P Plate
    Join Date
    Oct 2010
    Posts
    61
    Feedback Score
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default

    Have you try bukit merah?

  13. #263
    magnitude
    has no status.
    P Plate
    Join Date
    May 2012
    Posts
    114
    Feedback Score
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by ddjh9 View Post
    Have you try bukit merah?
    I bought and used it already few months back on my exhaust. Hold up very well for a few months. Guess i did not remove the rust completely before spraying it black. I think need rust converter to convert all first if not it will just keep coming back. I used both high heat primer and spray.

  14. #264
    HeyApple
    has no status.
    P Plate
    Join Date
    Apr 2011
    Posts
    64
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    i sprayed hi temp black on those exhaust, feels brand new and cover up rust.

  15. #265
    brianforever
    has no status.
    P Plate
    Join Date
    Oct 2004
    Posts
    51
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Hi bros..where to buy the high temperature black paint? as also which one is permanent? as most of the versions doesn't last

  16. #266
    brianforever
    has no status.
    P Plate
    Join Date
    Oct 2004
    Posts
    51
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by HeyApple View Post
    i sprayed hi temp black on those exhaust, feels brand new and cover up rust.
    can advise if it will last and where u buy from this good stuff

  17. #267
    xtm200
    has no status.
    L Plate
    Join Date
    Apr 2019
    Posts
    12
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Go Mustafa, buy the 1200 degrees cels (black or silver)
    Sand down with medium grit sand paper to remove all those brownish stuff on the exhaust
    Dry completely before sparying
    Spray really fine coats
    Maximum 2 or 3 coats
    Fix back, start bike, let it run for about 3 mins, let it cure overnight (or at least dont touch water)

  18. #268
    wailiyat
    has no status.
    Banned
    Join Date
    Sep 2019
    Posts
    7
    Feedback Score
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Quote Originally Posted by smokin View Post
    u can use the high temperature black paint from most hardware shops. they come in spray cans about $5 each. however they won't last, yo Tutuapp 9Apps ShowBox u have to be hardworking enuff to spray the pipes every few months to maintain blackness.
    anyone how to get rid of them ? or is there any black paint (high temperature) that can be used on them and where to get it ? thanks !
    Last edited by wailiyat; 17-09-2019 at 03:24 AM.

Page 6 of 6 FirstFirst ... 23456

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •