[Group] YAMAHA RXZ

[Puteraboncet]

Hi all just curious, for our rxz does using Motul 710 2T overkills ? as in is it used to its what the oil claims ? cos I've been using penzoil marine since day 1 took out the bike (pre mix) now change to 2t pump idk what 2T to use for some reason the feeling is different.. Now using Mobil 1 Racing but the smoke.. aiayayayaya ... haha, any one can help ?

[Gotham]

Hi all, just a ques where do you guys tap/connect your iu unit to? Direct from the battery? I seem to notice that my iu unit is draining alot of my battery cos if i dont ride it for 2 days my iu unit cant display anything. Thanks

[Prankzter]

Hello everyone!! I got a question especially for the old time rider of RXZ... I just pass my license and bought a 2nd-hand RXZ from a friend last year and overhauled em and rebuild the bike and it feels good as new... I'm really in love with my RXZ as it fits well for my purpose of transportation for work and also running some errands.. However I heard rumours saying that Singapore plan to scrap off this bike as they want to stop singaporean riding 2 stroke bike. So my question is this, my RXZ coe is expiring in year 2020. Bike was manufactured in year 2000. What I want to know is can my bike coe renew for another 10 years? Or maybe do I have to scrap this bike when the COE expire? Can someone advise me on this or how can I find this info cuz I can't seems to get any of this info from Onemotoring. Your kind advise will be much appreciated.

[Ash36]

Hello everyone!! I got a question especially for the old time rider of RXZ... I just pass my license and bought a 2nd-hand RXZ from a friend last year and overhauled em and rebuild the bike and it feels good as new... I'm really in love with my RXZ as it fits well for my purpose of transportation for work and also running some errands.. However I heard rumours saying that Singapore plan to scrap off this bike as they want to stop singaporean riding 2 stroke bike. So my question is this, my RXZ coe is expiring in year 2020. Bike was manufactured in year 2000. What I want to know is can my bike coe renew for another 10 years? Or maybe do I have to scrap this bike when the COE expire? Can someone advise me on this or how can I find this info cuz I can't seems to get any of this info from Onemotoring. Your kind advise will be much appreciated.

The bike is still renewable as long as it is renewed for 10 yrs.. 2 stroke bike is no longer brought into spore due to the tight emissions regulations, which i find is crap.. hahha..so u still can keep ur bike as long as u renew 10 yrs.. hope tht helps..

[Prankzter]

The bike is still renewable as long as it is renewed for 10 yrs.. 2 stroke bike is no longer brought into spore due to the tight emissions regulations, which i find is crap.. hahha..so u still can keep ur bike as long as u renew 10 yrs.. hope tht helps..

Hi Ash!! Thank you so much for the advise... At least I see a glimpse of hope for my bike.... I will keep renewing 10 years until they cant be renewed anymore.... Cheers!!

[Joe_Boxer]

Hi all just curious, for our rxz does using Motul 710 2T overkills ? as in is it used to its what the oil claims ? cos I've been using penzoil marine since day 1 took out the bike (pre mix) now change to 2t pump idk what 2T to use for some reason the feeling is different.. Now using Mobil 1 Racing but the smoke.. aiayayayaya ... haha, any one can help ?

Should try using Liqui Moly fully synthetic
im using 2t pump for it. Can be use for premix too..

Tips: if u using 2t pump, the 2t tube that connects to the carb, try pulling it out (don't forget to close the hole frm ur carb else it will suck extra air). Start ur bike and rev it to 3k rpm (hold it there) . your 2t should start to come out frm that tube like 1 small tiny drop. The correct count is, once it came out u wipe it and count to 5sec & it should come out again. The correct timing for using 2t pump is 5sec. If u getting slower or faster than that, try to adjust the 2t cable, IN to lean it / OUT to richen.

Hi all, just a ques where do you guys tap/connect your iu unit to? Direct from the battery? I seem to notice that my iu unit is draining alot of my battery cos if i dont ride it for 2 days my iu unit cant display anything. Thanks

U could try to connect the iu cables (white & black) to your key ignitions wire. If u unsure how to do this, u could ask your trusted mech to help u out. No more draining batts

[Gotham]

Hi all, i have not rode my bike for 1 wk now and now it cannot start at all, tried pulling choke and all but it still cant start. Do you guys know why? Thanks bros for your inputs.

[Joe_Boxer]

Hi all, i have not rode my bike for 1 wk now and now it cannot start at all, tried pulling choke and all but it still cant start. Do you guys know why? Thanks bros for your inputs.

Mybe due to ur spark plug being faulty. Try changing it by using G-power plugs. If cant start too, remove the spark plug and connect bck to the ignition coil and place it at ur bike frame, kickstart the bike to see if theres any firing. Or try to off ur fuel 1st & start the bike. Could probably due to overflow fuel.. hope it helps ������

[sy4kboy]

hi bros just want to enquire

i recently installed a chamber pipe to my rxz and increased my main jet to 240
asked a local mech to set the carb also
then recently my piston seized at kje

setting tak ngam is it?

[supafly]

hi bros just want to enquire

i recently installed a chamber pipe to my rxz and increased my main jet to 240
asked a local mech to set the carb also
then recently my piston seized at kje

setting tak ngam is it?

How are you doing your 2t?


Sent from my iPhone using Tapatalk

[sy4kboy]

How are you doing your 2t?


Sent from my iPhone using Tapatalk

currently running on premix 1L/30ml

[Joe_Boxer]

hi bros just want to enquire

i recently installed a chamber pipe to my rxz and increased my main jet to 240
asked a local mech to set the carb also
then recently my piston seized at kje

setting tak ngam is it?

How is ur block setup, any porting/polish?
Reed valve, piston and also carb needle?

Also what kind of chamber u're using? As for chamber pipes, u need to choose the right "stomach" or they called it "exhaust belly" for ur purpose. There is a longer and shorter belly aka for drag use or for distance. Should read more about 2strokes aftermarket exhaust.

Stock Rxz carb (55k and mili 26 9504 stock carb is using thicker needle which runs lean on mid and top range, have it change to panther gamma needle or could ask an experience mech to sand down the stock needle with a proper measurements). Avoid using local piston. Always do 3-4times spark plug reading on every WOT. #inoracer

[sy4kboy]

How is ur block setup, any porting/polish?
Reed valve, piston and also carb needle?

Also what kind of chamber u're using? As for chamber pipes, u need to choose the right "stomach" or they called it "exhaust belly" for ur purpose. There is a longer and shorter belly aka for drag use or for distance. Should read more about 2strokes aftermarket exhaust.

Stock Rxz carb (55k and mili 26 9504 stock carb is using thicker needle which runs lean on mid and top range, have it change to panther gamma needle or could ask an experience mech to sand down the stock needle with a proper measurements). Avoid using local piston. Always do 3-4times spark plug reading on every WOT. #inoracer

I overhauled my bike in march at jb so no porting only rebore. using standard reed valve but my mech did something to it i'm not sure how to explain but he made it thinner so more response i guess? hadn't changed my piston since the overhaul. how do i know whether i'm using local piston or the ori one? i just bought my mili carb too so the needle's a stock one. and i'm using the yy pang chamber pipe. Anw this is great info so thanks for sharing boss!

[kaizersg]

hi bros just want to enquire

i recently installed a chamber pipe to my rxz and increased my main jet to 240
asked a local mech to set the carb also
then recently my piston seized at kje

setting tak ngam is it?

after ur local mech set your carb ada lari kasi test , balik paddock ada check bakor @ spark plug? 😊

Sent from my SM-A300G using Tapatalk

[sy4kboy]

after ur local mech set your carb ada lari kasi test , balik paddock ada check bakor @ spark plug? 😊

Sent from my SM-A300G using Tapatalk

takde boss hmm pasal kedai dah nak tutup haha but i'll be sure to do that the next time round thanks boss! 😄


Sent from my iPhone using Tapatalk

[Joe_Boxer]

I overhauled my bike in march at jb so no porting only rebore. using standard reed valve but my mech did something to it i'm not sure how to explain but he made it thinner so more response i guess? hadn't changed my piston since the overhaul. how do i know whether i'm using local piston or the ori one? i just bought my mili carb too so the needle's a stock one. and i'm using the yy pang chamber pipe. Anw this is great info so thanks for sharing boss!

U have to know ur purpose before going any further on modification. As u need to know that using chamber pipe, it requires big/strong combustion, higher compression stuff like that. And so there's the port and polish part come along, not to forget head skim, gear ratio, crankcase, rod, bearings, clutch housing, sprockets & bla bla bla. Haahaa ! This are just a few examples for racing component. Best to keep it stock (last longer) and u could just play around with ur reed valve and get the best tuning of carb.

For ori piston, 1st is the packaging (box) with serial code 55G. Also, ori piston comes with separate ring (55G serial too) & etc..
Example for 55k piston, inside the piston there's indication of 55K00, ART & beside the ART, there's a numbering like 7 (probably diff size diff num). For the top, there is 55K, bottom left is the sizing for the bore but engrave upside down. Same goes to ori 5pv piston.

Local piston are tend to break more easily, cant withstand high compression & hotter spark plug etc.
Always do a plug check on every run. Well, ride safe bro..

[gloves2ali]

Hi guys bought a caty RXZ 2016 October, Coe end 2024 cost me 5k plus 1.2k down payment. Riding for 9 years already all 2b bike. First bike was 125z, then Honda wave, back to 2stroke RXZ. Have some setting problem here need some guidance from you guys.

Previously my bloc was 0.25 carb setting 210main jet 22.5pilot original needle. Petrol consumption 340km full tank. TOP speed 120km/he engine roaring like Mad

I hear people said Suzuki gamma needle set good, very powerful. I went to buy and change the Suzuki gamma needle, bloc same 0.25, main jet 110 pilot 22.5. Really very powerful, can go 150km/hr and going on but my balls shrink cos the handle trembling like hell. rpm very smooth and light can ram till 11k lol. Yes it maybe powerful, but the petrol damm scary, after I change to this setting my full tank only can last me 180-200km at most. Faint ~~


Any thing I can do to at least keep up the petrol consumption to at least 250km per full tank ? But remain the same power

TIA

[fx110]

https://carousell.com/p/【wtb】-ipone-...ttle-117620531
Looking for Ipone 2T Empty Bottle
Condition:-
1.No crack
2.Yellowish is acceptable
3.Not required clean bottle
4.With or without label is acceptable

Required 3-4 pcs
PM me your offer

[rubern93]

Anybody selling rxz maybe left 6mth-1 year coe left?. budget around 1k & below. COE non renew is fine

[rubern93]

Anybody selling rxz maybe left 6mth-1 year coe left?. budget around 1k & below. COE non renew is fine

[limk0pi83]

Hi guys bought a caty RXZ 2016 October, Coe end 2024 cost me 5k plus 1.2k down payment. Riding for 9 years already all 2b bike. First bike was 125z, then Honda wave, back to 2stroke RXZ. Have some setting problem here need some guidance from you guys.

Previously my bloc was 0.25 carb setting 210main jet 22.5pilot original needle. Petrol consumption 340km full tank. TOP speed 120km/he engine roaring like Mad

I hear people said Suzuki gamma needle set good, very powerful. I went to buy and change the Suzuki gamma needle, bloc same 0.25, main jet 110 pilot 22.5. Really very powerful, can go 150km/hr and going on but my balls shrink cos the handle trembling like hell. rpm very smooth and light can ram till 11k lol. Yes it maybe powerful, but the petrol damm scary, after I change to this setting my full tank only can last me 180-200km at most. Faint ~~


Any thing I can do to at least keep up the petrol consumption to at least 250km per full tank ? But remain the same power

TIA

choose one bro good fc stANdard set speed 160-180 tops depends on ur spoket also and riding style, or below average fc with 180km plus or cmeter game

for me i go for the latter.

[limk0pi83]

oh ya jarum standard suda asarkn sikit..pather is good only when u high rev.

[limk0pi83]

I overhauled my bike in march at jb so no porting only rebore. using standard reed valve but my mech did something to it i'm not sure how to explain but he made it thinner so more response i guess? hadn't changed my piston since the overhaul. how do i know whether i'm using local piston or the ori one? i just bought my mili carb too so the needle's a stock one. and i'm using the yy pang chamber pipe. Anw this is great info so thanks for sharing boss!

bro u using chamber but never port polish block? mana ngam bro..nk moto kuat, kuat trus bro

[kaikai92]

Hi guys, I am waiting for mt tp test on 29 Nov and is currently considering the rxz as my first bike. I would like to seek experienced bros or sis here that owns an rxz to give me some views on this bike.

1) maintainence roughly how much
2) fuel consumption okay?
3) how to care for 2 stroke bikes

Any advice will be greatly appreciated =)

[faridhisham]

Hi guys, I am waiting for mt tp test on 29 Nov and is currently considering the rxz as my first bike. I would like to seek experienced bros or sis here that owns an rxz to give me some views on this bike.

1) maintainence roughly how much
2) fuel consumption okay?
3) how to care for 2 stroke bikes

Any advice will be greatly appreciated =)

Maintenance quite cheap and fairly easy. Just change engine oil and take care 2t and normal stuff like need to change tyre, brake pads etc.

Fuel consumption isn't that good but can change setting to make it slightly better i think roughly will be about 20-25 km/l

Just take care of your 2t oil and check your block and piston to make sure no scratches should be fine.

Sent from my ONEPLUS A3010 using Tapatalk

[limk0pi83]

Hi guys, I am waiting for mt tp test on 29 Nov and is currently considering the rxz as my first bike. I would like to seek experienced bros or sis here that owns an rxz to give me some views on this bike.

1) maintainence roughly how much
2) fuel consumption okay?
3) how to care for 2 stroke bikes

Any advice will be greatly appreciated =)

workhorse bike, easiest bike to maintain

[neez]

Hi guys, I am waiting for mt tp test on 29 Nov and is currently considering the rxz as my first bike. I would like to seek experienced bros or sis here that owns an rxz to give me some views on this bike.

1) maintainence roughly how much
2) fuel consumption okay?
3) how to care for 2 stroke bikes

Any advice will be greatly appreciated =)

maintenance is very reasonable..

FC 20-25km/L

make sure your 2t always have enough hahas

[kaikai92]

Maintenance quite cheap and fairly easy. Just change engine oil and take care 2t and normal stuff like need to change tyre, brake pads etc.

Fuel consumption isn't that good but can change setting to make it slightly better i think roughly will be about 20-25 km/l

Just take care of your 2t oil and check your block and piston to make sure no scratches should be fine.

Sent from my ONEPLUS A3010 using Tapatalk

workhorse bike, easiest bike to maintain

maintenance is very reasonable..

FC 20-25km/L

make sure your 2t always have enough hahas

Thx you guys for your advice =) Im likely to get a RXZ but I heard from my friend that better to get those before 2011 or 2010? cause those are japanese made. Any idea about the diff btw the jap made RXZ over the ones after that?

[limk0pi83]

Thx you guys for your advice =) Im likely to get a RXZ but I heard from my friend that better to get those before 2011 or 2010? cause those are japanese made. Any idea about the diff btw the jap made RXZ over the ones after that?

bragging right plus u can use all 3 pipes, lemang, 3bs, 5pv added bonus lemang can mod

[limk0pi83]

selling new old stock 55k gladiator disc type for japan model. made in japan. kindly pm

[Ash36]

Got a blue Rxz japan coverset for sale. Price reduced to clear. Initially collected for project, but no time to carry out. Items gd for respray project. Tank dented a bit , need to knock and do internal recoating. Comes with original sidecovers too. Whole set is complete. Only front lower mudguard not avail. Priced at $280. Interested, pls watsapp at 9437203five..

[punkrockboy84]

Anyone know any RXZ groups to join in SG, like those that hang our pretty regularly?

[Ash36]

Got a blue Rxz japan coverset for sale. Price reduced to clear. Initially collected for project, but no time to carry out. Items gd for respray project. Tank dented a bit , need to knock and do internal recoating. Comes with original sidecovers too. Whole set is complete. Only front lower mudguard not avail. Priced at $280. Interested, pls watsapp at 9437203five..

Note: price now reduces to $250.. item to clear asap..

[Ash36]

Note: price now reduces to $250.. item to clear asap..

Price now reduced to $230

[limk0pi83]

Anyone know any RXZ groups to join in SG, like those that hang our pretty regularly?

rxzeckers sg, retro bikes singapore and retro bikes. hope this helps

[Ash36]

Got a blue Rxz japan coverset for sale. Price reduced to clear. Initially collected for project, but no time to carry out. Items gd for respray project. Tank dented a bit , need to knock and do internal recoating. Comes with original sidecovers too. Whole set is complete. Only front lower mudguard not avail. Priced at $280. Interested, pls watsapp at 9437203five..



Item reduced to $200.. priced to clear..

[Fluffygrenz]

Hi, I'm using a 15/37 sprocket. Block y4 0.5.
I tried riding, and I usually feel hard to pull up my speed once I reach 7rpm. That's about 100km/hr. is it due to my settings or reedvalve or need to overhaul? Because I heard you actually can cruise at 100-120 but this one I cruise 90 only. Hope you guys can advise. Thanks.

[Mrkeringting]

Hi guys, need help. I think im having problems with my rxz FC. Full tank can last me only for 2 days. I travel from MacPherson to jurong @ 90-100km/hr most of the time. Isit normal? And anyone knows any mechanic which is specialist in rxz that can be trusted here and across the border? TIA for ur help guys. Cheers.

[gloves2ali]

Did a rebuild for my rxz at AGL panjang. Big damage to pocket. But price is reasonable, rounded off to 5750RM everything inside engine is new except for gears and crankcase itself. Super in love with my bike

Full overhaul package 2800RM
New bearings SKF
New crankshaft and rod ORI 55K
New piston ORI 55K
New piston ring ORI 55K
New gasket
New reed valve ORI
Block rebore 0.5
Decarbonise exhuast pipe
Oil & plug
Respray body frame
Respray engine cover
Respray bloc & head

New rim 2xx
New dunlop tyre 2xx
Original CDI 250RM
HEL brakeline 2xx
Brake front and rear pads 1xx
Brake caliper 2xx LOCAL
Brake disc 1xx
KYB shocks 150RM
Ori Riderfoot peg 65RM
Ori pillion foot peg 65RM
Ori Pillion stand L/R 185RM
Swingarm 285RM ORI
Petrol reserve valve 50RM
Petrol floater 50RM
Original seat 135RM
Original Mirror 40RM
Full set SS screws for whole bike. 1xx
Rxz coverset Conversion 680RM
oem coverset
Headlight
Headlight bracket
Tailight
Tailight bracket
Signal light left right

Didn't add up the "xx" its already 5855. I leave it xx because i couldn't remb the exact price, if were to add the "xx" i guess would be at least 6200RM. Panjang gave some discount because i rebuild everything one shot damage was 5750. Overall satisfactory result from AGL panjang.

What you guys think about the price ? Reasonable or expensive

[limk0pi83]

bro expensive la brader.

[limk0pi83]

u stay ys which block, can go limkopi.

[Pendek]

Hmmm thread has been dead for a year over? Let's bring it back from the dead aye.. First post for 2019 😁✌🏼️

[kaizersg]

[BALYSA]

i guess there's not many riding rxz here.... seen lots on the road tho...

all in msn groups bro Bluestacks Lucky Patcher Kodi . someone use my email to subscribe, and i cant seem to unreg to re-reg.