Jump to content
  • Join SingaporeBikes.com today! Where Singapore Bikers Unite!

    Thank you for visiting SingaporeBikes.com - the largest website in Singapore dedicated to all things related to motorcycles and biking in general.

    Join us today as a member to enjoy all the features of the website such as:

    • Forums
    • Blogs
    • Picture/Video Gallery
    • Motorcycle Clubs
    • Event Calendar
    • and many more!

    Registering is free and takes less than 30 seconds! Join us today to share information, discuss about your modifications, and ask questions about your bike in general.

    Thank you for being a part of SingaporeBikes.com!

[Group] Super Four Non-VTEC Family: PB1 VerR & VerS


Recommended Posts

Rode my baby today. Some things didn't feel right.

 

Firstly, after the steering cone, clutch cable replacement and front fork repair, I realised in the morning that instead of the front two lights constantly being lighted up when you start, only the left side is lighted up. The right side is not. Signalling right (blink) is ok as per normal.

 

Next, my brakes are making a hell lot of noise when nearing to a stop. Sounds like metal rubbing against metal. When engine is off, I move the bike forward using my legs, can hear the grinding sound also... :cry:

 

Even my speedometer light is starting to act cranky. On slopes, it turns off. I gotta give it a slight knock for it to come back on. I already checked, the casing is tightened. :sian:

 

 

Bro, send back to unique for wiring checks. Maybe there is some faulty wires inside the meter or headlight. I faced the same problem before. Signal light on & off by itself then the ligting gone awry. Open up and saw some wires already worn out by itself. Then after that my bike gone POWERCUT by itself and I cant go more than 7k rpm on every gear and the whole system in the meter shuts down. mech check all the way to the rectifier and saw the problem. One of the wires near the rectifier burned. After remodification of wirings and changing most of the wire now its alright already. Plus he bypass the powercut...so can go more than the limit :angel:

 

About the brakes, its actually uneven on the brake pad thus the sound. Might wanna go check on the calipper maybe its need servicing or sometimes it does sound like that. Given time it will back to normal like my rear calipper. But check calipper 1st :)

Honda Rebel 125 (Rebeliah) 2004-2006

Super 4 Ver S (Sephia) 2006-

 

Mersing(Air papan), Desaru,Tanjung Balau,Tanjung Piai,Pahang/Rompin,Penyabong,bekok waterfalls,Sepang/KL, Penang/KL,Melacca/Gunung Ledang,Pahang Endau Rompin Jungle. more to come~

http://i32.photobucket.com/albums/d23/salleh_/S4MHondaman.jpg

Link to post
Share on other sites
  • Replies 18.1k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

ic ic.. interesting.. hondaman,.. if u suddenly wake up and got the urge to install it one day... tell me yeah? might go down with u and see the difference.. :) meanwhile take care n ride safely!

 

Hahaha...if god permits then one day I will do it. Then I bring u along and we can race again to test the difference...lol

 

 

lol.. agreed!!!

 

hondaman... waiting for you to had the argue and wake up and chiong to workshop and install it..

 

I will...lol. Btw, I went to motorworld yesterday during office (thanks to my boss who asked me to go despacth at UBI so I cabut to Kaki bukit lol). My fren recommend me this MR HI-OCTANE metal thingy that you just put it in your tank and it will help to break the minerals in the petrol thus giving better throttle response and also saving a few CLICKS on the milage. Like it helps the carb to work a little easier.

 

It sells at $30. I asked the seller and he also explained the same thing plus he recommended me and says that all of them uses this Hi-Octane on their bikes. he even said his milage also saved.

 

He said this thing use for a lifetime and he bring up the subject BROQUET product and says its a waste of money to use it.

 

BUt I didnt buy the HI-Octane...lol...coz I never bring enough money to work :angel: . Maybe next month lah go n buy.

 

I buy other things instead... :angel:

Honda Rebel 125 (Rebeliah) 2004-2006

Super 4 Ver S (Sephia) 2006-

 

Mersing(Air papan), Desaru,Tanjung Balau,Tanjung Piai,Pahang/Rompin,Penyabong,bekok waterfalls,Sepang/KL, Penang/KL,Melacca/Gunung Ledang,Pahang Endau Rompin Jungle. more to come~

http://i32.photobucket.com/albums/d23/salleh_/S4MHondaman.jpg

Link to post
Share on other sites
Hahaha...if god permits then one day I will do it. Then I bring u along and we can race again to test the difference...lol

 

 

 

 

I will...lol. Btw, I went to motorworld yesterday during office (thanks to my boss who asked me to go despacth at UBI so I cabut to Kaki bukit lol). My fren recommend me this MR HI-OCTANE metal thingy that you just put it in your tank and it will help to break the minerals in the petrol thus giving better throttle response and also saving a few CLICKS on the milage. Like it helps the carb to work a little easier.

 

It sells at $30. I asked the seller and he also explained the same thing plus he recommended me and says that all of them uses this Hi-Octane on their bikes. he even said his milage also saved.

 

He said this thing use for a lifetime and he bring up the subject BROQUET product and says its a waste of money to use it.

 

BUt I didnt buy the HI-Octane...lol...coz I never bring enough money to work :angel: . Maybe next month lah go n buy.

 

I buy other things instead... :angel:

 

is it?? COOLL!!!!!

http://www.singaporebikes.com/forums/asset.php?fid=279659&uid=24812&d=1407032960
Link to post
Share on other sites

just changed

 

  • steering cone $90
  • wheel bearing $50
  • water pump $160
  • water pipe $150
  • insulator $15
  • custom made radiator $200
  • Air filter (normal one) $25???
  • coolent $???

 

How u guys think of it? is it too exp in anyway or parts? total bill is $800+++ plus works man ship also... i need all ur valuable comment to decide whether should i go back dere again.. thx thx :cheeky:

Attitude is everything you need

:thumb:

 

31/10/06 - 12/09/07 FR 7325 B Honda SP

07/11/07 - 03/05/08 FQ 2462 B CB400 version s

10/05/08 - 26/11/08 FR 1206 B CB400 Vtec 1

27/11/08 - 09/01/09 FBA 1784 K Spark 135

07/02/09 - 31/10/09 FL 3809 E CBR 400 RRN

Link to post
Share on other sites
what is the address for motorworld? going there to consult the mech regarding the metal thingy.

 

Its at 10 kaki Bukit Rd. 1 #01-08.

 

Can look for Fauzi i think. Tel: 68440792/68440794.

 

Or can try and call their boutique at 89 Short Street #01-11. Call them 1st to ask if the product available or not there. Then can go there lor. coz that time I go the product finish.

 

Tel: 63361126

Honda Rebel 125 (Rebeliah) 2004-2006

Super 4 Ver S (Sephia) 2006-

 

Mersing(Air papan), Desaru,Tanjung Balau,Tanjung Piai,Pahang/Rompin,Penyabong,bekok waterfalls,Sepang/KL, Penang/KL,Melacca/Gunung Ledang,Pahang Endau Rompin Jungle. more to come~

http://i32.photobucket.com/albums/d23/salleh_/S4MHondaman.jpg

Link to post
Share on other sites
I thought of getting the 2nd hand GPR exhaust in the sbf classifieds.

 

I read also that LTA transfer fee is $20 and inspection is $50-60??? What on earth do they inspect?? So expensive. Anyone changed their end-can recently and can reply? Thx.

 

I tot inspection only $17?

http://www.singaporebikes.com/forums/asset.php?fid=279659&uid=24812&d=1407032960
Link to post
Share on other sites

i already know wheres motoworld !!!! whahahahah gd luck finding it ....

Past to present rides

 

Honda nsr sp 150 pro arm

Honda super4 ver s - yamaha rxz 135

Honda cbr 600 rr

Suzuki hayabusa 1300 - yamaha cygnus 125 - yamaha lc135 spark

Aprilia sr max 300 I.e

 

http://p1.bikepics.com/2013/10/22/bikepics-2608839-full.jpg

Link to post
Share on other sites
just changed

 

  • steering cone $90
  • wheel bearing $50
  • water pump $160
  • water pipe $150
  • insulator $15
  • custom made radiator $200
  • Air filter (normal one) $25???
  • coolent $???

 

How u guys think of it? is it too exp in anyway or parts? total bill is $800+++ plus works man ship also... i need all ur valuable comment to decide whether should i go back dere again.. thx thx :cheeky:

 

Wah bro! Massive change of parts there. Where did you do the repairs? Your radiator custom-made, meaning non-Honda radiator right? How's the bike so far? Total bill $800, but it'll prolong the life of your bike mah.. Let's hope nothing goes wrong anymore after such a bad experience for you.

 

Anyways, brought my baby back to Unique. Seems that the bulb has two filaments and one of it was blown. They changed it for free sia. :thumb:

 

Also installed a 3-point crashbar. Wanted to wait for the black crashbar, but no stock for quite some time already, so went ahead with the chrome one. Surprisingly, it reduced the overall vibration on the right handle-bar. Was told that the old 2-point crashbar was crooked after the previous owner skidded, so maybe it caused the vibration I guess. Smooth ride.. :thumb:

 

Next up o_O :

1) Get a Ver S header from Ah Ann scrapyard ($100)

2) Clutch-plate and gasket replacement ($120)

3) Slowly remove all the rust from the parts by hand

 

Went to Ah Ann again just now with a friend. Surprisingly, with a friend around, he reduced the price from $200 previously, to $100. :p Now.. Bringing back the header from Jln Buroh to Jurong is gonna be a pain..

For the certainty of death and the knowledge of life's fragility, makes it worth living.

Link to post
Share on other sites

Oh yeah.. Chanced upon Darkness19 at Unique earlier too. His blue Ver S looks great. Kinda jealous that my baby is so rusty. Lol.

 

Hondaman, the sound is because my left brake disc is unevenly worn due to the rim being warped. Can see when the tire is spun freely in the air, it's not moving straight. That's why the uneven wear and corresponding sound.. :sian:

 

New rim's gonna cost a lot. So gonna live with it and wait. :cry:

For the certainty of death and the knowledge of life's fragility, makes it worth living.

Link to post
Share on other sites
Oh yeah.. Chanced upon Darkness19 at Unique earlier too. His blue Ver S looks great. Kinda jealous that my baby is so rusty. Lol.

 

Hondaman, the sound is because my left brake disc is unevenly worn due to the rim being warped. Can see when the tire is spun freely in the air, it's not moving straight. That's why the uneven wear and corresponding sound.. :sian:

 

New rim's gonna cost a lot. So gonna live with it and wait. :cry:

 

hi bro,nice mitting u just nw at unique :angel:

Four Wheels Move The Body,Two Wheels Move The Soul

Link to post
Share on other sites
Oh yeah.. Chanced upon Darkness19 at Unique earlier too. His blue Ver S looks great. Kinda jealous that my baby is so rusty. Lol.

 

Hondaman, the sound is because my left brake disc is unevenly worn due to the rim being warped. Can see when the tire is spun freely in the air, it's not moving straight. That's why the uneven wear and corresponding sound.. :sian:

 

New rim's gonna cost a lot. So gonna live with it and wait. :cry:

 

Ask c can press back or nt ? if nt the get 2nd 1 lor then change up a aftermarket flower brake disc about $90

 

so u all gg down S4 gathering or nt

3 Arai Helmet Meets Up :angel:

Link to post
Share on other sites

em... i'm just wondering... there is a blue metal piece attached to my engine... I'm wondering what is it... i look at others S4.. they don't have it le...

http://www.singaporebikes.com/forums/asset.php?fid=279659&uid=24812&d=1407032960
Link to post
Share on other sites
i saw in another thread about the inspection.. (cant remember which one)

 

so the end-can inspection is only $17 ??

 

nope.. it's 50+.. i'm using GPR.. they check d pipe like they always do during routine inspection.. the only diff is they only check d pipe and u gotta keep d cert which they'll give to u after which.. in case TP or ROV stops u and examines ur pipe.. u need d documents to prove.. =)

Link to post
Share on other sites
i saw in another thread about the inspection.. (cant remember which one)

 

so the end-can inspection is only $17 ??

 

are you talking about VICOMM inspection?

http://www.singaporebikes.com/forums/asset.php?fid=279659&uid=24812&d=1407032960
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...