KYMCO Xciting 300/400/500

[Jn]

What about the temperature ?

Is it ok whith the plastics of the Xciting ?

 

Maybe it depends on where you live, I've seen big troubles in Bangkok with Xenon in high temperature, but over here H.I.D. xenon in Xc is no prob.

I ALSO thought that SG. is a couple of degrees cooler then BKK.

 

Good thing is Cree Led for motor is only 20Watt instead of the regular 35Watt motor lights.

The fan on backside and the aluminum socket/holder have to keep it cool too.

 

 

Cheers Jan

Edited February 19, 2014 by J@n

[pipi]

Hi guys, can I know normally how much pressure u guys pump the front and rear tyres?

[Jn]

Hi guys, can I know normally how much pressure u guys pump the front and rear tyres?

 

Front tire (rider only): 29.0 PSI (2.0 kgf/cm²) (+/- 2 bar)

Rear tire (rider only): 32.0 PSI (2,25kgf/cm²) (+/- 2.20bar)

 

Front tire (rider & passenger): 29.0 PSI (2.0 kgf/cm²)

Rear tire (rider & passenger): 32.0 PSI (2,25 kgf/cm²)

 

 

Kind regards,

 

Jan

 

b.t.w.

Tire pressure should only be adjusted when the tires are cold

Edited February 19, 2014 by J@n

[maddog]

Guys, where in tampines/simei got scooter wash?

 

Sorly i no no lol....serangoon have...

 

Sent from my SM-N9005 using Tapatalk

 

Where in s'goon ?

 

Kaki Bukit can ? Bike Studio, 2nd floor above Taihin. Corner shop.

[corrado]

Kaki bukit will do. What building is it located?

[wajarian]

Nice color and neat

 

Sent from my SM-N9005 using Tapatalk

[maddog]

Kaki bukit will do. What building is it located?

 

https://www.facebook.com/BikeStudioLLP

[corrado]

https://www.facebook.com/BikeStudioLLP

 

Ok noted tks

 

Sent from my CW-V88-QUAD using Tapatalk

[kongfu]

Where in s'goon ?

 

Kaki Bukit can ? Bike Studio, 2nd floor above Taihin. Corner shop.

 

I meant to say serangoon north.

 

R69 ultimate detaiLing...actually its address is 7030 amk ave 5

 

Sent from my SM-N9005 using Tapatalk

[eesymerej]

Kaki bukit will do. What building is it located?

 

 

Bike Studio is better. R69 has moved away from their roots and gone for bigger money detailing exotic bikes and super sports cars such as Ferrari, Maserati and Lamborghini.

 

Sent from my C6833 using Tapatalk

[Jn]

September/October I requested @ factory the washable DNA air filter and now finally it's out!

 

Kymco Xciting 400i (13-14) DNA Air Filter, product number: P-KY4SC13-01

 

http://www.e-dnafilters.com/Product.asp?ID=2026

 

http://freeimagehosting.nl/site2/image.php?di=BKU4http://freeimagehosting.nl/site2/image.php?di=EG28

 

http://freeimagehosting.nl/site2/image.php?di=EGHY

 

 

Greece route 112 SGD. (ex. shipping) via Ebay

 

Cheers Jan

Edited May 3, 2014 by J@n

[Harryho]

Bike Studio is better. R69 has moved away from their roots and gone for bigger money detailing exotic bikes and super sports cars such as Ferrari, Maserati and Lamborghini.

 

Sent from my C6833 using Tapatalk

 

 

R69 is still washing my Xciting. They r also washing friend's Honda pcx.

[ggc9898]

i change the belt at 43500 km.

 

 

Lol... the belt is constructed to last. That's why it's more ex.

 

Sent from my SM-N9005 using Tapatalk

[ggc9898]

double post

[kongfu]

i change the belt at 43500 km.

 

Yup i rmbr now you posted abt it b4. So its proven dat the belt will last.

 

Sent from my SM-N9005 using Tapatalk

[pipi]

Tks jan!!!

[sukhoi37]

Warning : avoid service your bike at Unique Motorsports, went there to install voltmeter today.

Told me 30 minutes to wait for the part to come, ended up over 1hour...

After installation, my LED light switch (modded) doesn't work. They say it's because of the switch...

they fixed the problem on the spot. (fine...)

Went to carpark tonight, gantry refuse to open.

Insert the cashcard, no response. (wtf???!!)

[Advrider]

Sorry I can't link the erp unit to your led switch. Unless you tap from the same source. Maybe you could explain further.

 

Sent from my C6903 using Tapatalk

[Harryho]

He is saying....

 

Was a Unique to install a Voltmeter.

 

1. Waited an hour for d Part to arrive.

2. After installing his Voltmeter, his LED / switch doesn't work.... But eventually got it restored.

3. However upon returning home, found out ERP not working. 'wtf!'

 

He was furious ...

[Jn]

In my opinion tapping from same source doesnt sound logical.

 

Verstuurd vanaf mijn GT-I9505 met Tapatalk

[dRain]

Anyone else having problem with some kind of metallic noise from the front system when driving over bumps and imperfections in the road?

[Advrider]

He is saying....

 

Was a Unique to install a Voltmeter.

 

1. Waited an hour for d Part to arrive.

2. After installing his Voltmeter, his LED / switch doesn't work.... But eventually got it restored.

3. However upon returning home, found out ERP not working. 'wtf!'

 

He was furious ...

 

That's why I'm asking what has the led switch got to do with the erp device. Unless he tap from the same source.

 

Sent from my C6903 using Tapatalk

[restedburrr]

Anyone else having problem with some kind of metallic noise from the front system when driving over bumps and imperfections in the road?

 

Bro have u checked if any of the screws are broken or loose? I had the same problem (thinking it was a problem at the front), until I realised one of the screws which fastened the rear box to the back of the scooter was actually broken and loose. Fixed it and the sound disappeared. I don't know how the screw got broken, could have been because the bike dropped.

 

Sent from my C6833 using Tapatalk

[maddog]

i've asked before, gonna ask again

 

I'm gonna place an order for a kaoko throttle locker, anybody wanna get one too? can share shipping.

 

http://www.kaoko.com/c11/Cruise-Control-Kits.aspx

[pipi]

Anyone else having problem with some kind of metallic noise from the front system when driving over bumps and imperfections in the road?

I also had the same issue, any advice?