Jump to content
  • Join SingaporeBikes.com today! Where Singapore Bikers Unite!

    Thank you for visiting SingaporeBikes.com - the largest website in Singapore dedicated to all things related to motorcycles and biking in general.

    Join us today as a member to enjoy all the features of the website for FREE such as:

    Registering is free and takes less than 30 seconds! Join us today to share information, discuss about your modifications, and ask questions about your bike in general.

    Thank you for being a part of SingaporeBikes.com!

Yamaha FJR1300


Recommended Posts

PC is power commander. is a device to so called overwrite ur original ECU fuel injection mapping, make sure u find a good place & good mech to tune it up. the effect can be facsinating.

currently in Singapore only a few shops are carry this product.

& after fix up u need to send ur bike 4 dynorun or dynojet, currently in Singapore only 2 shops hv this machine. Unity motor @ bukit merah & Pleasure motor @ ubi. :thumb:

 

Hi, mutant_sheep,

 

Sorry, hope I won't offend you this time.

 

But if after fix PC, is it a must to do a Dyno-run or Dyno-jet?

 

Is it that the fuel injection mapping will not be maximised if PC is added, but NO dyno is done?

 

Thank you!

Honda Phantom TA200, FV5349A (19/04/2005 - 28/06/2006)

Honda Super 4 Vtec 1, FS6537H (28/06/2006 - 13/02/2007)

Yamaha FJR1300 ABS, FBB661H (13/02/2007 - 31/05/2008)

Honda VFR800 ABS, FBB 404 J (31/05/2008 - 15/08/2009)

ADIVA AD 200, FBD 36 C (15/08/2009 - 13/05/2010, 1430hrs)

Yamaha FZ6N, FBA 7274 B (13/05/2010, 1430hrs - 03/05/2016, 1840hrs)

Yamaha FZ8, FBF 61*9 T (07/05/2016, 1130hrs - )

Link to post
Share on other sites
  • Replies 16.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi, mutant_sheep,

 

Sorry, hope I won't offend you this time.

 

But if after fix PC, is it a must to do a Dyno-run or Dyno-jet?

 

Is it that the fuel injection mapping will not be maximised if PC is added, but NO dyno is done?

 

Thank you!

 

imo, the FI mapping wont be optimize without jetting or dynojet. Some may say there is mapping from others bike can be use, but i think every bike is diff even is same batch. a very good example is the CO setting on our FJR, i seen on a few diff FJR, they are diff.

Link to post
Share on other sites
imo, the FI mapping wont be optimize without jetting or dynojet. Some may say there is mapping from others bike can be use, but i think every bike is diff even is same batch. a very good example is the CO setting on our FJR, i seen on a few diff FJR, they are diff.

 

OIC... Thanks for your explanation...

Honda Phantom TA200, FV5349A (19/04/2005 - 28/06/2006)

Honda Super 4 Vtec 1, FS6537H (28/06/2006 - 13/02/2007)

Yamaha FJR1300 ABS, FBB661H (13/02/2007 - 31/05/2008)

Honda VFR800 ABS, FBB 404 J (31/05/2008 - 15/08/2009)

ADIVA AD 200, FBD 36 C (15/08/2009 - 13/05/2010, 1430hrs)

Yamaha FZ6N, FBA 7274 B (13/05/2010, 1430hrs - 03/05/2016, 1840hrs)

Yamaha FZ8, FBF 61*9 T (07/05/2016, 1130hrs - )

Link to post
Share on other sites
Looks FIERCE! :thumb:

 

Sound louder than Remus? Considering to install PC?

BikeTech boss advise me previously if change after market exhaust must get PC also, else the difference wun be maximised.

 

Btw, what's this? :confused:

 

bro what u mean what this??/ leo vince bro

 

by the way i dont think i will buying the PC... wants have PC al the mapping need to be done properly.. if not yr bike will go hairwire...

 

if at mah have it i think i might do it if meng tong is the one mapping it..

 

i dont know abt other mechanic skills

 

anyone can advise on a good mechanic that can do this?/

http://i46.photobucket.com/albums/f128/inflames85/funny.gif
Link to post
Share on other sites
Hi Deanz4, your pipe is it sounds like many2 bikes riding all together, Rumble,rumble,.................... :cheeky:

 

Last time at my place car park heard a loud rumble coming but when I turn around, I just saw one FJR riding towards me, nod my head and this Malay guy return my greetings by nodding his head too :angel:

 

I think his pipes was the Remus something, I not sure :thumb:

 

BTW the sound quite scary if comes suddenly, can give heart attack to old man :angel:

 

rumbing sound it is.. veery deep bassy sound.. that with the bafful on .. at first when i just install it i found abt dissapointed due to the sound not really loud.. so i went inspection and all then go home.......

 

project X start...heheh take out the silencer.and wala......sound so loud... i dont know if the sound is the same or remus is louder... never get to compare

 

 

now itchy already never put silencer:angel:

http://i46.photobucket.com/albums/f128/inflames85/funny.gif
Link to post
Share on other sites
bro what u mean what this??/ leo vince bro

 

by the way i dont think i will buying the PC... wants have PC al the mapping need to be done properly.. if not yr bike will go hairwire...

 

if at mah have it i think i might do it if meng tong is the one mapping it..

 

i dont know abt other mechanic skills

 

anyone can advise on a good mechanic that can do this?/

 

Bro deanz4,

 

I think bro Casper's "Btw, what's this?" is referring to "What is a PC?". :p

Honda Phantom TA200, FV5349A (19/04/2005 - 28/06/2006)

Honda Super 4 Vtec 1, FS6537H (28/06/2006 - 13/02/2007)

Yamaha FJR1300 ABS, FBB661H (13/02/2007 - 31/05/2008)

Honda VFR800 ABS, FBB 404 J (31/05/2008 - 15/08/2009)

ADIVA AD 200, FBD 36 C (15/08/2009 - 13/05/2010, 1430hrs)

Yamaha FZ6N, FBA 7274 B (13/05/2010, 1430hrs - 03/05/2016, 1840hrs)

Yamaha FZ8, FBF 61*9 T (07/05/2016, 1130hrs - )

Link to post
Share on other sites
Bro deanz4,

 

I think bro Casper's "Btw, what's this?" is referring to "What is a PC?". :p

 

No lah, bro Casper was referring to the "extra" foot rest for the pillion that was installed on bro Deanz4 FJR.

 

I was curious about it too, thought new FJR comes with extra features.

 

BTW, bro Deanz4, very nice foot rest you have there :thumb:

It doesn't make any difference whether a motorcyclist has the right-of-way or not, the rider is the one most likely to get hurt.

 

 

 

http://www.motorcycle-accidents.com/bike_photo/4-21-02_b.jpg

Link to post
Share on other sites

Ride my bike over to Hong Leong to have the mechanic check my bike regarding the abnormal metal knocking noise this morning.

I think it might be the timing chain getting loose :sian:

 

When I left the place I saw a red FJR riding into HL.

The bike belongs to any bro here? If I leave the place a bit later, I will have the chance to say hi to you.

I was waiting at the bus stop for my bus, no bike, no car, taxi so expensive, bo bian :cry:

It doesn't make any difference whether a motorcyclist has the right-of-way or not, the rider is the one most likely to get hurt.

 

 

 

http://www.motorcycle-accidents.com/bike_photo/4-21-02_b.jpg

Link to post
Share on other sites
todAy anybody wanna join me for petrol run at 2nd link pls come at 10.15 pm at last top up cash card nearest to the 2nd link..

 

91130344 buzz me din

 

I'll b at GP Shell ard 10pm wif my peeps.

Wave to me yer if u see a mly guy wif a ponytail ...... :angel:

The Road less Travelled

 

http://multiply.com/mu/aaronazmi/image/1/photos/177/600x600/51/PIC-0105-1.JPG?et=EPg%2B7KSmSyqSCJnhbA%2C62w&nmid=309411908

Link to post
Share on other sites
or maye do mass watch movie JMPER is coming out.... cineleasure??/ then can park at my secret carpark.... how?? i think have at around 12.30am then 10.30...

 

the carpark exclusive for fjr rider only...

 

Sorry bro, just saw ur msg after return from shift. I haven't watch Jumper. Don't mind going if there is another trip again.

 

No lah, bro Casper was referring to the "extra" foot rest for the pillion that was installed on bro Deanz4 FJR.

 

I was curious about it too, thought new FJR comes with extra features.

 

BTW, bro Deanz4, very nice foot rest you have there :thumb:

 

Yah, I noticed the footrest too. Cool. Helps protect the pipe from getting scratches from pillion's shoes/sandals. I also looking to fit one after my wife's heels cause minor scratches on my pipe.

 

Bro, tmr Sunday, if plan to meet for kopi or sthing, drop me a msg. If can I come. 91056109.

 

Cheers.

Link to post
Share on other sites
No lah, bro Casper was referring to the "extra" foot rest for the pillion that was installed on bro Deanz4 FJR.

 

I was curious about it too, thought new FJR comes with extra features.

 

BTW, bro Deanz4, very nice foot rest you have there :thumb:

 

oic i thought which one u guys refering too.. oh that foot rest k.. the normal one tell u is simply very flimsy and sucks( i think only 06 modal have it..so when i pillion some one not familiar with my bike (other then my gf..hehhe sshhhhh dont tell my gf) will leave their shoe sole at my pipe had a hard time scrubbing it so i had it custom made.by uncle lim which also ride fjr...

http://i46.photobucket.com/albums/f128/inflames85/funny.gif
Link to post
Share on other sites
Ride my bike over to Hong Leong to have the mechanic check my bike regarding the abnormal metal knocking noise this morning.

I think it might be the timing chain getting loose :sian:

 

When I left the place I saw a red FJR riding into HL.

The bike belongs to any bro here? If I leave the place a bit later, I will have the chance to say hi to you.

I was waiting at the bus stop for my bus, no bike, no car, taxi so expensive, bo bian :cry:

 

bro update k on the abnormal knocking sound

http://i46.photobucket.com/albums/f128/inflames85/funny.gif
Link to post
Share on other sites
anyone wanna sell their fjr?? my friend wanna buy

 

My 07 silver storm still up for sale. last offer at $22.8k. Any other reasonable offer can sms me at 97558366.

ARCHIVED: TX500/CB550F/CB750K4/CB750F2/ZR750/CB750F/GSR600/ZG1000/ST1100/GPZ400/

CB1/Silverwing/GL1500SE/GL1500SEW/GL1800A1/GL1800A2/GL1800A4/FJR1300ABS/TMax

ACTIVE: GL1800A12 & SYM200

 

 

Assumption is the mother of all [email protected]

Link to post
Share on other sites
nice meeting u at GP//.... get to hear my roaring pipe....hehe

 

A pleasure to meet u too bro.

If got any outings buzz me and Fazuli yer ....... :angel:

The Road less Travelled

 

http://multiply.com/mu/aaronazmi/image/1/photos/177/600x600/51/PIC-0105-1.JPG?et=EPg%2B7KSmSyqSCJnhbA%2C62w&nmid=309411908

Link to post
Share on other sites
No lah, bro Casper was referring to the "extra" foot rest for the pillion that was installed on bro Deanz4 FJR.

 

I was curious about it too, thought new FJR comes with extra features.

 

BTW, bro Deanz4, very nice foot rest you have there :thumb:

 

:angel: SWEE! You know me best!

 

Yups I was referring to that piece of extra metal. Haha...

Apr '99 - Sept '00 (Yamaha WR200)

Dec '00 - Jul '03 (Honda CB400 Version S)

Jul '03 - 5 June '06 (Yamaha XJ900S Diversion)

10 May '06 - Current (2004 Yamaha FJR1300ABS)

29 Aug '07 - Current (Suzuki Swift Sports-Mega)

04 Feb '09 - Current (2009 Honda City LX i-Vtec)

http://i2.photobucket.com/albums/y26/Casper4XXX/SBFSignatureIV.jpg

Link to post
Share on other sites
Ride my bike over to Hong Leong to have the mechanic check my bike regarding the abnormal metal knocking noise this morning.

I think it might be the timing chain getting loose

 

HOw old is your ride, bro? Think most 'aged' bikes have this 'pinging' sound.

 

Timing chain loose is one possibility, valve clearance might be another.

I intend to do a one-time valve clearance by this year. Estimated to cost arond S$600. The labour is expensive as it involves a lot of work. But bo pianz,mileage now around 75k and bike getting old liao (5yo this year).

 

Any buggers here done valve clearance before? How's the difference?

Apr '99 - Sept '00 (Yamaha WR200)

Dec '00 - Jul '03 (Honda CB400 Version S)

Jul '03 - 5 June '06 (Yamaha XJ900S Diversion)

10 May '06 - Current (2004 Yamaha FJR1300ABS)

29 Aug '07 - Current (Suzuki Swift Sports-Mega)

04 Feb '09 - Current (2009 Honda City LX i-Vtec)

http://i2.photobucket.com/albums/y26/Casper4XXX/SBFSignatureIV.jpg

Link to post
Share on other sites

Juz wondering ... by any chance those FJR owners selling their bike coz wanna upgrade to Concourse? ...... :cheeky:

The Road less Travelled

 

http://multiply.com/mu/aaronazmi/image/1/photos/177/600x600/51/PIC-0105-1.JPG?et=EPg%2B7KSmSyqSCJnhbA%2C62w&nmid=309411908

Link to post
Share on other sites
nakano might looking 4 that.. :smile:

anyway mine also looking to sell. asking for 14.5K, slightly negotiable. Plate number not inclusive.

 

Huh, bought not long ago selling again?

http://img.photobucket.com/albums/v416/urylle/284668.gif

 

Biting on the fray of my hair, I muse upon the way to find the oasis of evermore beyond the vertical horizon, I shall join the windupdeads in owl city, neither my safetysuit nor my red jumpsuit apparatus can save me, cuz I mistook a death cab for cutie in plain white T's...

Link to post
Share on other sites
bro zamani.. i bought the pipe for 1200...the pipe witout silencer is great man.....loud pipe save lives....hhehehe

 

waaahh with my H&B and change to your leo vince.... hehe muz will be moz fierce liao~

 

hahha very tempted liao~

 

hey dean 1.2K is cheap for carbon fibre!! compared to 1.3K for remus fpr aluminium end cans~

 

Very interested in buying... hehe....

http://martymcfry.com/images/limpdick2.jpg

'01 - Honda Repsol

'03 - Honda Super Four VTec Spec II

'04 - Honda ST1100 Pan European

'05 - Yamaha FJR1300A (FAVORITE!! Best Ride ever!!)

'09 - Vespa GTS300 Super

'12 - Yamaha FZ1-N

Future - Kymco Downtown 350i, Xciting 400 or T-Max 530?

Link to post
Share on other sites

hey guyz,

 

some of us will be going for Songkran + phuket bike week.... anyone interested juz sms or call me~

http://martymcfry.com/images/limpdick2.jpg

'01 - Honda Repsol

'03 - Honda Super Four VTec Spec II

'04 - Honda ST1100 Pan European

'05 - Yamaha FJR1300A (FAVORITE!! Best Ride ever!!)

'09 - Vespa GTS300 Super

'12 - Yamaha FZ1-N

Future - Kymco Downtown 350i, Xciting 400 or T-Max 530?

Link to post
Share on other sites
nakano might looking 4 that.. :smile:

anyway mine also looking to sell. asking for 14.5K, slightly negotiable. Plate number not inclusive.

 

Ya, i'm looking.... but just that above $20K is beyond my budget....

 

haiz, that time that "Muscleman" bro only pushed-in his 10-mth old '06 FJR for $19K, should have GRABBED!!! :sian:

http://i37.photobucket.com/albums/e73/ChrisCheong8800/TMAX-3.jpg

 

http://i37.photobucket.com/albums/e73/ChrisCheong8800/DSC_3871-1.jpg

 

'Old ladies in the Midwestern US...now have to pay higher taxes to finance...Wall Street's Maseratis. That's horribly immoral - and bad economics.'

 

Jim Rogers-19/20/08

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • DAIS_1MONTHFREE_SingaporeBikes banner_Motorcycle_300X250.jpg

×
×
  • Create New...