High-revs

Hi guys. Got a major problem. Went to start my bike and no budge!!!! The neutral signal does go on but it the starter is doing nothin. I used the bike last night and no problems at all. I'm not sure if the lights go on or not. Any one got any suggestions. Also do roadwin have there own silencers for add ons or do u have to custimize them your self.

Hey any one can suggest a K&N filter model or any dimensions of a tappered filter that i can use instead of the normal stock filter?

Ok thanks stsoh. I will take try all those 'upgrades' from this forum and the other. I will let u guys know how everthin went. Hope this works

What do u mean by increase fc? Also i found this info. on a different forum 'The quickest way to make your 125cc Roadwin run faster is remove entire factory plastic air breather assembly and install simple K&N foam air fliter..cost about 20 bucks..Next remove chrome muffler part of exhaust pipe..drill out the rivets holding the baffle..remove baffle and take a 15inch long or longer punch and knock bigger holes in the deflector plate in the muffler..discard baffle and rivet chrome end cap back on the muffler...next remove rear wheel and change rear sprocket to one that is 2 teeth less than the factory sprocket.I did this to my roadwin and it picked up 8 miles per hour faster than stock'-does this make sense. These are the 'upgrades' I'm trying to get on my roadwin: 1. Increase pickup/acceleration 2. Increase or keep same top speed 3. Decrease vibration 4. Improve exhaust. I know it is only a 125cc but its pissing off when u can not accelerate to skip an other vehicle. :angry: Can any one help. Thanks guys

Hi ppl. Does anybody get lots of vibration nrxt to petrol tank when rving at or over 7000 while driving(more noticable) and load noice? Im also tryin to find out how i can keep same (or not difer so much) top speed but increase acceleration. Any solutions for at least one problem. Cheers