Motovation Engineered Parts -Motovation Sliders & Heavy Balancers with Barend Sliders

[Unique_Motorsports]

New Motovation Heavy Balancers with Barend Sliders

http://i450.photobucket.com/albums/qq228/uniquemotor/honda_big.gif

Pricing:

Honda: $65

Yamaha: $65

Suzuki: $65

Renthal (Small): $65 (Suitable for DRZ/ Renthal/ aftermarket handlebars)

Yamaha FZ1/FZ6: $75

Renthal (Heavy): $75 (Suitable for DRZ/ Renthal/ aftermarket handlebars)

 

These NEW designed bar-end balancers are designed to be heavier than stock to cancel out the high frequency 2nd and 3rd order harmonic vibrations that cause discomfort and fatigue while riding (yes, they really work!). Comes with replaceable bar-end sliders, Machined from high grade stainless steel, these bar-ends weigh about 330 grams a piece.

 

Take the MOTOVATION test! Ride 50 miles with stock bar-ends and then replace them with ours and go for another 50 mile ride and we'll take them back* if you do not feel a definite improvement in your riding experience! If you ride longer distances you have to have these as they'll eliminate that 'buzz' you feel in your hands after a long ride.

[Unique_Motorsports]

http://www.motovation-accessory.com.sg/images/article/11/framesliderstop.jpg

 

Motovation Frame Sliders, call them crash protectors, crash bobbins, fairing protectors or frame sliders, all these products ultimately seek to do one thing - protect your expensive bodywork or the essential and often expensive structural parts of your motorcycle from damage in the event of a fall or tip-over. The frame slider concept is as old as the proverbial 'crash bar' and today there are as many designs and brands as there are models of bikes. The proliferation of these types of products testify to the success of the idea of providing a sacrificial item to absorb some of the damage in the event of a fall. We are by no means experts on this concept nor were we the first to come up with it, but in this article we hope to provide you with an unbiased view so that you can make an informed decision when you're ready to put down your hard earned cash.

 

http://www.motovation-accessory.com.sg/images/article/11/motovationfirstpage_header.gif

 

 

http://www.motovation-accessory.com.sg/images/article/11/crashmvsliders1.jpg

Some of the customer pics, that had crash with Motovation Frame Sliders

 

 

http://www.motovation-accessory.com.sg/images/article/11/gsxr1000k6mvcrashsliders.jpg

Crashed Suzuki GSXR1000 2006 with Motovation Frame Sliders

 

 

http://www.motovation-accessory.com.sg/images/article/11/drz400smmvcrashsliders.jpg

Crashed Suzuki DRZ400SM 2007 with Motovation Front Fork Sliders

 

 

http://www.motovation-accessory.com.sg/images/article/11/gsxr1000k6crashrearaxle.jpg

A good reason why you will need a Axle Slider for your bike.

 

 

*Some details to clarify from Motovation. Its not about how much you need to pay for to customised one, when it would not work properly for the price you pay. But being considered alot on safety reasons some can be done, but some its impossible. Thats why we had rejected alot customers.

Customers whom wish to customise frame sliders on the bike, can PM us on the bike/model/year which we will meet up and take a look at your bike. If it can be done, it will be free of charge for the first bike only.

Customer can PM us and make arrange at our Ubi location.

[haowei]

boss, got fame slider for cbr 600 rr 2006. how much isn't? plus drilling fee.

[Unique_Motorsports]

boss, got fame slider for cbr 600 rr 2006. how much isn't? plus drilling fee.

You have a PM.

[skahxiong]

boss , do you have stock for gsxr 600 07 front and rear axle slider ? and how much is it thanks !

[Unique_Motorsports]

boss , do you have stock for gsxr 600 07 front and rear axle slider ? and how much is it thanks !

You have a PM.

[skahxiong]

thanks alot ! have install my sliders ! thanks unique !

[Unique_Motorsports]

thanks alot ! have install my sliders ! thanks unique !

You are welcome. Thank you for your support.

[guangson]

cbr1000rr05 frame slider how much? need to drill hole? how long it takes for installation?

[Unique_Motorsports]

cbr1000rr05 frame slider how much? need to drill hole? how long it takes for installation?

You have a PM.

[glen79]

need to check for the motivation slider for fz6s1... ?

how many pcs do i need to buy? how much is it?

[Unique_Motorsports]

need to check for the motivation slider for fz6s1... ?

how many pcs do i need to buy? how much is it?

You have a PM.

[ha_pig]

can i check with u, wat the diff between the heavy balancer and with the barend slider?? which 1 more heavy and better?? ridding cbr600rr8

[Unique_Motorsports]

can i check with u, wat the diff between the heavy balancer and with the barend slider?? which 1 more heavy and better?? ridding cbr600rr8

You have a PM.

[vanselle]

Hi,

can it fit into Rizoma Handle Bar?

[Unique_Motorsports]

Hi,

can it fit into Rizoma Handle Bar?

You have a PM.

[sivaboi]

are there sliders for suzuki gsx 750? colour ones? like orange or red?

[Unique_Motorsports]

are there sliders for suzuki gsx 750? colour ones? like orange or red?

Sorry, only standard black is available for Motovation sliders.

[esperados]

got for suzuki gsr 400??

price??

gt stock?

can pm me...

thankss...

[Unique_Motorsports]

got for suzuki gsr 400??

price??

gt stock?

can pm me...

thankss...

Yes, we have ready stock for motovation balancers with barends sliders.

[momo1605198623]

New Motovation Heavy Balancers with Barend Sliders

http://i450.photobucket.com/albums/qq228/uniquemotor/honda_big.gif

Pricing:

Renthal (Heavy): $75 (Suitable for DRZ/ Renthal/ aftermarket handlebars

Hi, are these suitable for pro taper handle bars?

[Unique_Motorsports]

;5968455']Hi' date=' are these suitable for pro taper handle bars? [/quote']

We have the Motovation heavy balancer with bar end that are suitable for pro taper or renthal handle bar. Do drop by any of our workshops for installation.

[roywong13]

got ready stock for me ?

[Unique_Motorsports]

got ready stock for me ?

Of course, have ready stock for you.

[roywong13]

Of course, have ready stock for you.

 

thanks