mormor

Try using one of those exhaust pad. someone is selling in the forum.

I would recommend Eugene Saddlery, near Regina. I did my pervious warp for my runner that. Best time is that the boss is a young fellow, and he will give advice on the design suited for your bike. Cheers! Martin

I guess you would have to look for PB1 header than, modification needed thou.

Try HK yahoo auction. They have it and its below $500

Hi alll bros, Is the sound of the exhaust really so soft? Is it soft till like its stock pipe? No Doubt it will have better perfomance due to the shorter silencer. Cheers!

I seen the pipe. The muffler is wider than Yoshi.(louder?) Only thing is that the bolt-on is a bit ... not as solid as yoshi and micron IMHO. The Alu pipe nice... CF Super nice!!! Any bro can comment on the sound and performance?

Thanks Bro!

HI All Bro, I bought a belly pan recently and while i am installing it, i discovered that the side of the bellypan actually touches the header. Is it normal, or did i bought the wrong belly pan? will it cause any damage? Can anyone advise on this? Thanks in advance. Cheers! Martin

Selling Gilera VXR 3 yrs old Bought on 03 Sep 2005 Rd tax till 25 Sep 2006 (Will renew for new owner) No. Plate: FW 7XXX M I, m the 2nd owner Bike is very well maintain, Change oil every 3000km and no expense spare for the maintainance of the bike. All servicing and maintainance done at Future Scootering. (can check with them for garantee) color Gun Metal. Mileage abt 50k+ Bike polish Weekly (very shiny) Selling the bike for $3500(cash) + COI of 6 x 206 Acessories added; Facial customization Carbon Dual Headlight ($60) Headlight protector ($40) Handle Bar Mud guard ($35) Headlight switch ($15) Short wind screen ($35) Shark Handle grip ($10) Over size balancer ($20) Police Car Alarm ($90) New 3 piece gasket ($100 +Installation) New Fuel Hose ($?) Metal foot plate ($35) Undercarriage LED blue+white light ($40) 2 point grounding ($10) VXR box rack ($40) Custom warp Seat ($80) Water bottle holder ($5) After Market Horn LOUD!!! ($35) "Ice" rear Mudguard ($80) Peformance Modification Polini speed control Polini Speed clutch Polini Clutch Bell All 3 cost me about $600, sorry i cannot remember the price. Polini Open pod With cover ($100 + Tuning) GPR slipped on exhaust (Poppy, but i have polish it to high shine!! lol) Aftermarket Suspension (recommended by FS) ($140) Might have missed out some other details, but as i say, i have taken good care of my bike and i have spare no expenses on the well being of my darling "Gillian". Bike look exceptionally Sleek at night. Bike is in very good condition, view to believe. contact: Martin @96668687 Prefer viewin @ Hougang

Hi, Anyone interested in a non-approved Leo vince exhaust(full system) for Sacrabeo200? If yes please contact me at 96668687. Wanna get rid of it fast, so give me a good offer and its yours.

Hi ppl, Got this from LTA. Maybe this will help. Our Ref: LTA/CSV/F20.032.000/9283 Date: 12-JAN-2006 Tel: 1800 2255 582 Fax: 6553 5329 Dear Sir, INSPECTION OF EXHAUST PIPE FEEDBACK NUMBER: 320895 Please refer to your enquiry dated 06 Jan 2006. 2 We would like to inform you that LTA allows the replacement of after-market vehicle parts, including exhaust system, as long as it does not adversely affect the safe operation and/or exhaust emissions characteristics of the vehicle, or compromise the safety of vehicle occupants and other road users. The after-market exhaust system should be specifically designed for that particular vehicle make and model and be installed by a qualified person in accordance with the product manufacturer's recommendation. 3 To date, LTA has approved the use of 31 brands of after-market exhaust systems which include 8 brands for motorcycle. (E.g. Yoshimura, Arrow, Lazer, Akrapovic, Leovince, Micron, GPR and Remus). These after-market exhaust systems have undergone testing, either by the vehicle manufacturer or by independent test laboratories, and have shown to comply with internationally recognised standards that they would not affect the safe operation or exhaust emissions of the vehicles. Every unit of such exhaust systems will come with either an EEC or JMCA certificate to show that it is suitable to be installed for that particular vehicle make and model. 4 However, if you wish to install any after-market exhaust system other than those already approved, you would be required to seek LTA's approval and provide the following documents for our evaluation: (a) Technical specification and installation details (including pictures/drawings) of the after-market exhaust system; (b) Certification from the after-market exhaust manufacturer that the replacement exhaust system is suitable to be fitted to your vehicle and would not adversely affect the safe operation and exhaust emission characteristics of the vehicle; and © Evidence or test reports from the vehicle manufacturer or independent test laboratories (e.g. TUV, DEKRA, VCA or JVIA) to show that the after-market exhaust system had been manufactured and tested according to international recognised standards. You can forward these documents to the Vehicle Engineering Division of LTA at 10 Sin Ming Drive, Singapore 575701. 5 Alternatively, you may also wish to approach the local distributor for the after market Leovince exhaust system at the following for assistance if you wish to install the exhaust silencer on your motorcycle: Mr Gianluca Lozzi G-Max Race 922A East Coast Road Singapore 459114 Tel: 6742 1948 Fax: 6742 2196 6 Please be informed that every unit of the vehicle fitted with an approved after-market exhaust system would be required to be produced for an inspection at any of the LTA-authorised inspection centres. The certificate for the after-market exhaust system is also required to be produced for verification during the inspection. Please note that a Vehicle Inspection Type Approval System (VITAS) application fee of $20 and inspection fee of $30 (both exclusive of GST) for each application is payable to the inspection centre for this inspection. 7 We hope that the above clarifies. Yours sincerely (SIGNED IN LOTUS NOTES) TAN SHON LEI VINCENT for DEPUTY DIRECTOR VEHICLE ENGINEERING DIVISION

Hi Ppl, I am intending to import a leo vince exhaust which has already been approved by LTA. Can anyone advise what document do i need to bring for inspection? What are the complication if i dun have any of the cert or test report?