[Group] Sach Madass 125CC

[Mr. Grey]

Hey welcome aboard the SBF(spore bikes forum) and the madass thread that these guys run.

 

I'm no rider as of yet but I'm learning as much as I can. Stick around, browse through as much as you can and I hope you enjoy your tenure.

 

To start off, I hope you don't mind if I ask whether you're familiar with the various components to be mod-ed!

[TheMuffinMan]

Through the replies of various members, I've pretty much picked out what main engine components get modded and the various options available. Carb/Sprockets/engine internals and big bore kits.

 

What I was really interested in is the 200cc Honda engine that LittleLamb made a mention of. If costing isn't ridiculous, I might actually give that a go. DPI (Department of Planning and Infrastructure, from what I gather is similar to LTA in SG) are not as tight arses about swapping out engines so I'm not too worried about compliances.

 

And also there was a picture that Mod posted of this fully decked out MA125 resprayed in red. Petal disk rotors, upgraded calipers, braded hoses, oil cooler, carb/intake, USD forks, plus a few other bits and pieces. Wonder how much the owner dropped on all those mods.

 

http://www.singaporebikes.com/forums/attachment.php?attachmentid=64892&d=1212828756

[mod]

at the moment my bike is in pieces as i totally strip dwn the engine..and getting right size clamp for my USD fork..once i got my engine sorted out it would look something like this..im trying to figure out what rim is best to go with my fork cos i decided to have a 17 inch rim rather then stock 16inch.im also trying to use an oversize piston but along the way of trial and error i had twice cease my piston or i just cant get the right compression.still trying to get what is best and i realised at one time my bike is so fast but sadly enuff it wnt last for a week...and the powerful ur engine is the more discomfort you will feel due to the heavy vibration.. and as i dnt have a spare exhaust i have yet to modify and play around with the exhaust....i have running out of spare parts actually and i have to make do with whatever i can have it here and modified a lil bit to make it works..and this is where im facing a bit of complications....but on a bright note...i think im heading somewhere...i hope so..hehehee

[RempitburnOut]

hi...thot of getting a madass..but need some reviews from u guys...is it comfortable riding it? n when pilion is it comfortable too??

[Mr. Grey]

They may correct me if I'm wrong but the madass isn't highly recommended for carrying pillions for various reasons- The seat's big enough to comfortably fit one rider. If you got a big bum, then that rules out any ferrying.

 

As a 'fun-ride', your attention would be captured by the experience in riding this machine from place to place; basically clowning around when you can while making heads turn

[TheMuffinMan]

Hey Mod,

 

You got PM. I'd like to talk to you more about getting the sprocket kit/135cc kit+ carb/oil cooler. =)

[TheMuffinMan]

I remember someone on here had installed a Protaper handle bar. I'm looking to get the protaper triple clamp kit as well as a protaper bar but I have no clue what differences there are in the measurements between models (Evo, Contour, SE) and Rider specific styles (Henry/Reed, Windham, Woods, Carmichael, YZ High, Rm Low, SO MANY!!!!). Width, Height and Pullback.. how do those three options affect your riding posture?

[xlee]

They may correct me if I'm wrong but the madass isn't highly recommended for carrying pillions for various reasons- The seat's big enough to comfortably fit one rider. If you got a big bum, then that rules out any ferrying.

 

As a 'fun-ride', your attention would be captured by the experience in riding this machine from place to place; basically clowning around when you can while making heads turn

 

The Madass is fine of pillioning. Just sit closer together; maybe could be a little better if they designed the the pillion's foot pegs slightly more towards the rear.

 

Sitting position for both rider and pillion is quite comfortable; more upright and higher as compared to those sportsbikes that have a lower and more "hugging" feel. Give's one a more "relaxed" feel to riding the bike; don't really feel the need to try to get to the next red light as fast as possible. Handlebars could be a little higher to have a more comfortable position.

 

No clowning around; it's still a normal bike that can become a dangerous weapon if you want to be dumb and fool around.

[TheMuffinMan]

What happened to this thread? It was so busy before...

[TheMuffinMan]

Would this fit on our MA?

 

Pro Taper Triple Clamp

[mod]

see the sizes of your fork? i think the stock fork is smaller..

[TheMuffinMan]

Yeah I think so too but I don't know the exact dimensions. So you reckon it won't fit then?

[mod]

yeahh..it wont fit...if u wann change the fork as well..

[TheMuffinMan]

Any recommendations for forks?

[mod]

im using a fast ace inverted fork a replica of marzocci u can get it easily there..

[TheMuffinMan]

Which model are you using? AC-3 or AC-2?

 

Were they just forks or did you get the whole kit (triple clamps, brake, axle and brake disk)

 

How much did you pay for them? The ones shipped from US on ebay was like USD$280 just for a pair of forks

[mod]

im using AS02 and i paid like 300SGD ++ with shipping

[TheMuffinMan]

Do you have a picture of your bike with all the mods installed?

[Mr. Grey]

I saw one you MadAss riders riding toward bukit batok west/cck in the rain on Thursday! Black stock MA and the rider was female (but a little bit masculine though)

[adiboytri]

hey guys... where do you actually get the inverted fork for the ass...

[GoreCore]

Im riding the madass... Hahahha... Just start riding... U wanna open madass club...? Thats good idea... its very rare bike.... So how u wanna start the plan? - Gorecore...

[kidheck]

Hey all, what happened to this thread? Where's everyone? Well, just to say i'm back after quite some time. Well, hope to keep this thread running again and share whatever knowledge we know about this bike! Come back guys!!!

[kidheck]

Im riding the madass... Hahahha... Just start riding... U wanna open madass club...? Thats good idea... its very rare bike.... So how u wanna start the plan? - Gorecore...

 

Hi, already tried organising one but last minute cancellation cause of work commitments some had, namely myself. Will try to organise another after I get this thread up and running again.

 

Just started riding eh? Enjoy it, many more problems to come from your bike. I still do have problems wit my bike. I'm up to 12,000km on my bike already. Have fun...

[mod]

its been awhile tat im here...do keep me update with a meet up...i have some remaining stuff with me for the bike bcos some ppl in this thread are just wasting my time and effort ordering the parts and just kept quiet aft tat.maybe some of you here will be interested..

[TheMuffinMan]

What parts do you still have left with you?