[CLOSED] SBF Yamaha 125Z

[f.zi]

Anyone know ho wto change rite side bulb ?

 

i assume its ur right signal bulb.

 

screw out the screw from the outside of the casing.

try to take it off, if cant, u have to open the head fairing cause inside got one more screw holding the casing.

take out the blown bulb from socket, put in the new one into the socket.

screw back all screws into place, walla!

[oyc]

the choke lever is right at ur left thumb area, when ur left hand hold onto the bar.

 

Yup i saw tat liao.. thanks for helping...

[bustop]

yea yea.. wat sticky say correct..but u noe wat ? i dun always haven to open n close choke one.. my bike relac one.. oni if raining bike catch cold plus i whole day nv start bike than must use choke... use 2 finger stick in pull, then after that push back lo..

 

wa champion la ur bike

[f.zi]

guys, need to check with u all, where u all get ur carb tuning done. any of u guys do power setting on ur bike?

 

cause for me every morning after ride off from my carpark to main road. when i accelerate, i cannot drag my gears. everytime b4 my rpm reached 5 or 6 must change gear in order to accelerate more. after awhile it seems to be ok.

 

it shud be due to not warming up properly? i usually wait for 2-3 mins to warm up. or if i get my carb set properly, will this prob go away?

 

thanks guys

[GuiNNeSS]

guys, need to check with u all, where u all get ur carb tuning done. any of u guys do power setting on ur bike?

 

cause for me every morning after ride off from my carpark to main road. when i accelerate, i cannot drag my gears. everytime b4 my rpm reached 5 or 6 must change gear in order to accelerate more. after awhile it seems to be ok.

 

it shud be due to not warming up properly? i usually wait for 2-3 mins to warm up. or if i get my carb set properly, will this prob go away?

 

thanks guys

 

need to warm up abit 1st lah bro

[faiz89]

guys, need to check with u all, where u all get ur carb tuning done. any of u guys do power setting on ur bike?

 

cause for me every morning after ride off from my carpark to main road. when i accelerate, i cannot drag my gears. everytime b4 my rpm reached 5 or 6 must change gear in order to accelerate more. after awhile it seems to be ok.

 

it shud be due to not warming up properly? i usually wait for 2-3 mins to warm up. or if i get my carb set properly, will this prob go away?

 

thanks guys

 

i also same situation as you bro! lol..

 

guess like rookie517 said,

warm up a lil bit.

[juninho]

when u meet this type of prob when moving off.. ur carb needs to retune.. the setting run already.. tt was wat happen to me.. hope it helps

[ah_hong]

anybody sent their zed to spray the inner panels ..eg the part around ur meter down to along e side of the seats.. not the fairing itself.. ard how much ar?

[oyc]

mine also same...it does feel smooth at all.. even though the engine is hot it is still the same.. when u all say setting, do u all mean change the air jet n oil jet? or oni adjust the screw at the carb??

 

btw anyone experience heavy shaking when engine brake??

[f.zi]

when u meet this type of prob when moving off.. ur carb needs to retune.. the setting run already.. tt was wat happen to me.. hope it helps

 

i understand about the warming up part. but lets say after otr for quite sometime. i clutch in and blow the throttle abit. doesnt seem smooth at times. like got stuck stuck. what kind of setting btw? just air to fuel ratio or?..

 

mine also same...it does feel smooth at all.. even though the engine is hot it is still the same.. when u all say setting, do u all mean change the air jet n oil jet? or oni adjust the screw at the carb??

 

btw anyone experience heavy shaking when engine brake??

 

i dont know about air jet or oil jet. heh

 

heavy shaking when engine braking. hmmmm

u kick gear too fast? like u kick down to gear 2 or 1 when ur speed is at 70-80?

[oyc]

i understand about the warming up part. but lets say after otr for quite sometime. i clutch in and blow the throttle abit. doesnt seem smooth at times. like got stuck stuck. what kind of setting btw? just air to fuel ratio or?..

 

 

 

i dont know about air jet or oil jet. heh

 

heavy shaking when engine braking. hmmmm

u kick gear too fast? like u kick down to gear 2 or 1 when ur speed is at 70-80?

 

 

ok leh... even lyk when i riding den i close my throttle, the bike jerks too.. the sound of the engine brake sounds scary.. n can totally feel ur body moving front n back front n back.. =(

[f.zi]

ok leh... even lyk when i riding den i close my throttle, the bike jerks too.. the sound of the engine brake sounds scary.. n can totally feel ur body moving front n back front n back.. =(

 

cant think anything else except for ur clutch plate. i think clutch plate plays a big part in engine braking.

[oyc]

cant think anything else except for ur clutch plate. i think clutch plate plays a big part in engine braking.

 

Serious arh?? omg.. den if realli, hw much will it be to change it?? in sing$ and RM$???

[GuiNNeSS]

maybe piston/ring loose liao??

[f.zi]

Serious arh?? omg.. den if realli, hw much will it be to change it?? in sing$ and RM$???

 

85rm or less. or was it 75rm. forget already. but i know it cant be more than 85rm. i just changed my last week cause worn out and burn already. but still, if u make ur way to jb, rectify the problem first. see what the mech had to say

 

maybe piston/ring loose liao??

 

hmmm, not sure, another guy had his piston ring loose right and said it gave out a funny sound or what.

[GuiNNeSS]

for clutch noise, ez to check

 

when engine start, pull in clutch lever and listen

 

now, let go and listen

 

isit very big difference??

[juninho]

ya its also possible tt piston ring loose... and time to change piston.. when tt happen to me.. i did a carb reset and piston ring ad piston ring changed.. almost forget bout the piston thing.. this is my story

[xtribalx]

for clutch noise, ez to check

 

when engine start, pull in clutch lever and listen

 

now, let go and listen

 

isit very big difference??

 

 

big difference or small difference better lol??? mine like the sound softer only like the engine sound more relax

[f.zi]

my engine, after i ride for long time and when the engine is hot, it seems like my idling will run away. can go up to 2-3 and it will just stay there. how i make it go down? i clutch in, kick to gear one then i half clutch to make sure the rpm drop. but once i engage back to neutral, the rm back to 2-3 like tt.

 

an issue of carb setting?

[ayam1987]

guys,

 

i got a msg from friendster regarding the meet up..

 

 

News To aLL YaMaHa 125Z Riders ONLY ! ! !

There will b a 125Z MeeTUp oN Fri(26/09) at Far EasT Plaza, 0rCharD.. Itz Opposite Thai Embassy..

At 10pm Sharp..Sorry 4 the Late Notice..Tis is a RequesT by s0me 0f the 125Z Riders..

If You Can make it, do Come d0wn.. Mayb There'll be a RiDinG . . .

Do Pass ard tis Msg 2 0ther 125Z Riders..ThanX ! ! !

Look Out For me, i'll be wearing a BrowN Shirt Wif Brown SHoes . . . -MaNg0

 

 

guys,

any of u guys going for the meet up?

[GuiNNeSS]

big difference or small difference better lol??? mine like the sound softer only like the engine sound more relax

 

clutch in should sound softer

 

clutch out shld be louder, but if clattering too much, maybe need to replace liao.

[gloves2ali]

fzi, u went jb already ? so the chainguard + the rear hugger how much ? thanks for helping.

[f.zi]

fzi, u went jb already ? so the chainguard + the rear hugger how much ? thanks for helping.

 

oh shti. i just got back from jb. but i forget to check siaa.. sorry!

 

not sure when im gng in again. i will help u check when i go in again allright.

but i dont see them displaying the rear hugger leh.

 

anyway, changed my tail light just now.

 

guys, would any of u be interested in getting a bellypan for our bike?

its an add on to our coverset. currently only got black colour. if u all interested see if i can buy in bulk and get discount anot.im planning to get this next month

[gloves2ali]

hey bro dun say that.. i ley chey u.. u still say sorry.. no problem check for me next time... u got any pics of the belly pan ?

 

i remb some forumer post a pics of 125z chain tensioner !? does that help for easily slagging chain ? i very time go pull tight my chain ar, but always lose again.. cos i always like pick up fast fast ar, so chain easy loose... any idea does the chain tensioner will help to lower the slagging chain ?

[f.zi]

hey bro dun say that.. i ley chey u.. u still say sorry.. no problem check for me next time... u got any pics of the belly pan ?

 

i remb some forumer post a pics of 125z chain tensioner !? does that help for easily slagging chain ? i very time go pull tight my chain ar, but always lose again.. cos i always like pick up fast fast ar, so chain easy loose... any idea does the chain tensioner will help to lower the slagging chain ?

 

currently no pics. but u all shud know what it looks like lah.

 

talking about chain, will using high-end chain eg DID o-ring chain be better in term of chain slacking if we often pick up fast or everytime ride fast? or just normal chapalang chain will do? cause from what i know did oring chain no need to tighten so often compared to normal ones.