*NEED HELP* temp on bike. squeek sound when travel slow. RPM needle dropping retarted

[BELRAY]

hi guys,

i've 3 question that puzzle me.

although its not that important, but i dont like it the way now.

anyone of you know about what is going on, plese advise me!

i really need some help here.

thanks alot.

 

1st question :

just recently my bike temp when i leave it idling, the needle will shoot up to half when i leave it there for like 5-10mins.

usually it wont be like this. im riding sp btw.

and normally when i travel highway around 100km/h, the temp meter show will drop back to the "L" which is the LOW temp.

but now, it will remain at 1/3 of it bewteen the center and LOW temp showed.

im wondering what is going on? isit time for me to changes my coolant?

please advice me.

 

2nd question:

just recently ago also. i noticed that whenever i travel at a slow speed and i open trottle, i can hear a squeek sound coming from the front.

when i close trottle, the squeeke sound will be gone.

usually when i riding in gear 1 up carpark slop, when i listen clearly, the sound can be quite irritating. anyone knows of this?

please advice me. btw, its sp bike again!

 

3rd question:

passed few days ago, a mech told me that when rev the engine, the RPM will shoot up,

but if the needle dropping will pause awhile when at certain RPM number, and drop back to normal means somthing is wrong? i didnt know of this problem too till he told me. i tho is the RPM cable become retarded already.

this problem happen to my bike quite long ago.

anyone has got more accurate answer to this? its a sp bike.

 

someone here please help me

i need to know whats the fault 1st before i head down to bike shop.

 

 

thanks a million....

[WawanAprilia]

hi guys,

i've 3 question that puzzle me.

although its not that important, but i dont like it the way now.

anyone of you know about what is going on, plese advise me!

i really need some help here.

thanks alot.

 

1st question :

just recently my bike temp when i leave it idling, the needle will shoot up to half when i leave it there for like 5-10mins.

usually it wont be like this. im riding sp btw.

and normally when i travel highway around 100km/h, the temp meter show will drop back to the "L" which is the LOW temp.

but now, it will remain at 1/3 of it bewteen the center and LOW temp showed.

im wondering what is going on? isit time for me to changes my coolant?

please advice me.

 

2nd question:

just recently ago also. i noticed that whenever i travel at a slow speed and i open trottle, i can hear a squeek sound coming from the front.

when i close trottle, the squeeke sound will be gone.

usually when i riding in gear 1 up carpark slop, when i listen clearly, the sound can be quite irritating. anyone knows of this?

please advice me. btw, its sp bike again!

 

3rd question:

passed few days ago, a mech told me that when rev the engine, the RPM will shoot up,

but if the needle dropping will pause awhile when at certain RPM number, and drop back to normal means somthing is wrong? i didnt know of this problem too till he told me. i tho is the RPM cable become retarded already.

this problem happen to my bike quite long ago.

anyone has got more accurate answer to this? its a sp bike.

 

someone here please help me

i need to know whats the fault 1st before i head down to bike shop.

 

 

thanks a million....

i suggest wash ya carb and change ya idle jet ....

[BELRAY]

i suggest wash ya carb and change ya idle jet ....

 

my carb wash like 1 month plus back only.

could not be my carb?

hmmmm idle jet? whats that?

[evaakutenshi]

hi guys,

i've 3 question that puzzle me.

although its not that important, but i dont like it the way now.

anyone of you know about what is going on, plese advise me!

i really need some help here.

thanks alot.

 

1st question :

just recently my bike temp when i leave it idling, the needle will shoot up to half when i leave it there for like 5-10mins.

usually it wont be like this. im riding sp btw.

and normally when i travel highway around 100km/h, the temp meter show will drop back to the "L" which is the LOW temp.

but now, it will remain at 1/3 of it bewteen the center and LOW temp showed.

im wondering what is going on? isit time for me to changes my coolant?

please advice me.

 

2nd question:

just recently ago also. i noticed that whenever i travel at a slow speed and i open trottle, i can hear a squeek sound coming from the front.

when i close trottle, the squeeke sound will be gone.

usually when i riding in gear 1 up carpark slop, when i listen clearly, the sound can be quite irritating. anyone knows of this?

please advice me. btw, its sp bike again!

 

3rd question:

passed few days ago, a mech told me that when rev the engine, the RPM will shoot up,

but if the needle dropping will pause awhile when at certain RPM number, and drop back to normal means somthing is wrong? i didnt know of this problem too till he told me. i tho is the RPM cable become retarded already.

this problem happen to my bike quite long ago.

anyone has got more accurate answer to this? its a sp bike.

 

someone here please help me

i need to know whats the fault 1st before i head down to bike shop.

 

 

thanks a million....

 

hmmmm..im having the same prob as u..de squeaking part..but de reason being is bcoz my disc brake is already rusty..n pls dun b like me..i kip spraying wd40..hahaha..dis is wat happens when u noe nuts bout ur bike

[sICkbOi-dOt-cOm]

Disc brake spray WD40????

Clean the disc enough... wet cloth... and remove the rough patches on top of the disc...

[evaakutenshi]

Disc brake spray WD40????

Clean the disc enough... wet cloth... and remove the rough patches on top of the disc...

 

dat time i went 2 de shop den dey spraypaint my disc brake but no use oso..hahaha..i told u i dunno anythin about my bike..coz example arh..if the hinges of de door rusty *squeak squeak* den u put wd40 no more squeaking sounds..but apparently disc brake dun work dat way..heeeeeee

[sICkbOi-dOt-cOm]

Of coz... u dun have to be a bike guru lah.. Just know the mechanism of things work can... Like last time during BMX time.. To make the bike more "Effective" i will squeeze those lemons on the side of the rims.. So have better grip.. and it work like wonders

But now if put also no use... hahaha... Just clean ur disc and make sure brake pads are fit properly and in good working condition...

[evaakutenshi]

Of coz... u dun have to be a bike guru lah.. Just know the mechanism of things work can... Like last time during BMX time.. To make the bike more "Effective" i will squeeze those lemons on the side of the rims.. So have better grip.. and it work like wonders

But now if put also no use... hahaha... Just clean ur disc and make sure brake pads are fit properly and in good working condition...

 

aiteeeeeeeee..i'll ask de mech 2 do it..haaaaaaaaaaahahahaha =D

[BELRAY]

hmmmm..im having the same prob as u..de squeaking part..but de reason being is bcoz my disc brake is already rusty..n pls dun b like me..i kip spraying wd40..hahaha..dis is wat happens when u noe nuts bout ur bike

 

rusty as in you can see the rust very clearly?

or its hidden one?

from the way i look, it doesnt look rusty to me at all!

 

Disc brake spray WD40????

Clean the disc enough... wet cloth... and remove the rough patches on top of the disc...

 

HAHAHAHAH nice one. he mention just like during we riding bicycle that time!

 

dat time i went 2 de shop den dey spraypaint my disc brake but no use oso..hahaha..i told u i dunno anythin about my bike..coz example arh..if the hinges of de door rusty *squeak squeak* den u put wd40 no more squeaking sounds..but apparently disc brake dun work dat way..heeeeeee

 

[hairisg76]

aiteeeeeeeee..i'll ask de mech 2 do it..haaaaaaaaaaahahahaha =D

 

 

most likely the cause of the problem is the nut connecting the handlebar to the seat.

[evaakutenshi]

rusty as in you can see the rust very clearly?

or its hidden one?

from the way i look, it doesnt look rusty to me at all!

 

ahhhhhhh..so de paiseh..hahaha..yea..can see de rust..den dat time de mech go sandpaper den spray black paint over it..but aft awhile de paint no more oredi =/

 

most likely the cause of the problem is the nut connecting the handlebar to the seat.

 

laugh..laugh at me..grrrrrrrrr *bish*

[sICkbOi-dOt-cOm]

eh wth does he spray it to black xia???

[evaakutenshi]

eh wth does he spray it to black xia???

 

i dunno..i guess 2 cover up the rust =/ i told u i rly dunno anythin bout bikes..haaa..still learning

[sICkbOi-dOt-cOm]

Oh Okay... u should get some sand paper and autosol bro.. eh i mean sis..

Learning is a lifelong thing...

[WawanAprilia]

juz change ya disc brake .. safer ...

[Figila]

i oso got the squeeking sound at times.. dnoe where it come from.. its like ringin rather then squeeky.. at slow sppeed wen throttlng.. dnoe where it come from.. tink from engine.. bt it has no - or + pts.. but kinda iritating tat i dnoe wats the problem..anyone noes would be nice to let me noe the problem.. sumtime ask shop dif shop sae dif ting.. open2 sae dis sae dat.. i oso nt sure.. dnt wan end up changin evryting.

[evaakutenshi]

juz change ya disc brake .. safer ...

 

i feel cheated..hahaha..coz aft my accident..i send my bike 2 de shop n de shop replaced alot of parts for me including the disc brake..when i saw de disc brake i was like..y so rusty???den de mech said no worries =/ rly feel like banging my head against the wall..shld haf jus kept my previous disc brake instead of chgin it 2 stock n in de end dey gave me dis kind of disc brake..haaa

[sICkbOi-dOt-cOm]

I feel for you.. I've been cheated by them and it caused me to met with an accident in the middle of PIE heavy traffic and raining...