Technical Information and other info

[redname]

Originally posted by rweyen@Jul 16 2006, 03:34 AM

Wat about your riding habits? and do u lubricate often or leave it until now? tks for your advice...

i lub it once in a while

[redname]

Originally posted by onefour02@Jul 16 2006, 12:02 PM

i also newbie..

 

but i chain spray the chain until shiny (not letting it be dry), just like for my bicycle.

i tink thts too much lub

[HondaSuperFourHSF]

Originally posted by ah_huats@Jul 16 2006, 12:31 PM

Hi,

Am i ask what is the rating for the reommended EO's ?

10W-40

[xb84]

Originally posted by redname@Jul 16 2006, 07:41 PM

i tink thts too much lub

hehe probably over doing it liao..

 

cos just got bike for less than a month and now sch hols very free..

[vinsonyap]

jus curious.. coz i dun get my replies in component forum.. i wana ask where can i fix my 3pt crash bar at the cheapest, to do 6 pt or 7 pt grounding for my spec3 and also where is K&T haha.. hope u guys can provide me with the ans.. Thanks

[redname]

Originally posted by onefour02@Jul 17 2006, 08:07 AM

hehe probably over doing it liao..

 

cos just got bike for less than a month and now sch hols very free..

well, it might splashed onto ur rear tires, which isn't gd caused it'll make it slippery

[HondaSuperFourHSF]

Originally posted by vinsonyap@Jul 17 2006, 10:03 AM

jus curious.. coz i dun get my replies in component forum.. i wana ask where can i fix my 3pt crash bar at the cheapest, to do 6 pt or 7 pt grounding for my spec3 and also where is K&T haha.. hope u guys can provide me with the ans.. Thanks

cheapest that means is steel make coat with stainless stain paint $60.

good one not expensive also at only$80-100.

Grounding-$30-$80. depend on where you do. If you go extreme equipment on sunday. be the first 5 then is $30 for 7 pts grounding

K&T is at UBI industrial park. Very easy to find one

[vinsonyap]

Ohh.. ic.. thanks alot for ur infos..

[bgoy]

Hi riding ver S for 3 days, juz seen e FAQ

 

1) where is MotorX?

 

2) Where is e idling knob? Bike everytime cold start keep stalling...rpm is slightly below 1 which is supposedly normal idling for s4 but it still keeps stalling. Have to hold and maintain throttle at 1k rpm for 1 min or more to warm up. Is this normal?

 

3) Where is e reserve knob? Can't find it, does it mean bike automatically goes into reserve when low on fuel?

 

TK

[HondaSuperFourHSF]

1)Why you want to go MOTORX?

 

2) Below the oil tank, there is a plastic knot that is the idling knot to turn. idling speed at 1k rpm

 

3)No reserve if got fuel meter

[ah_huats]

Originally posted by HondaSuperFour(HSF)@Jul 18 2006, 07:06 AM

3)No reserve if got fuel meter

Riding Ver S and there is a analog fuel guage and a fuel knob...

But everytime mi fuel guage goes to reserve before i even need to turn the knob to reserve and i pump in at most 13L.

Is the fuel guage faulty?

 

No chance to ride till empty tank cos usually got pillon...

[bgoy]

Originally posted by HondaSuperFour(HSF)@Jul 18 2006, 07:06 AM

1)Why you want to go MOTORX?

 

2) Below the oil tank, there is a plastic knot that is the idling knot to turn. idling speed at 1k rpm

 

3)No reserve if got fuel meter

thanks mr hsf

 

go there install cheetah

 

btw, my headlight no longer lights up...high beam and low beam gone but still can flash high beam

 

is it e bulb or the headlamp that is gone?how to check

 

hai...so much prob this bike, steering cone also gone

[choyster]

yup, ver s fuel switch is located on the left hand side just below the fuel tank. for vtec and above its auto switch, will only display in the meters there that it is in reserve.

 

the fuel gauge is not acurate one. u can only ride till the bike cannot move on then u switch to reserve then u can tell how much u used b4 reserve. the bike will feel jerky or sudden lost of power and slowly come to a halt... ver s can hit quite a good distance compare to the vtecs.

[HondaSuperFourHSF]

Originally posted by bgoy@Jul 18 2006, 03:45 PM

thanks mr hsf

 

go there install cheetah

 

btw, my headlight no longer lights up...high beam and low beam gone but still can flash high beam

 

is it e bulb or the headlamp that is gone?how to check

 

hai...so much prob this bike, steering cone also gone

if you are saying that you can flash then your bulb is not damage. but if you can't even high beam then the bulb is damage

[bgoy]

Originally posted by HondaSuperFour(HSF)@Jul 18 2006, 04:32 PM

if you are saying that you can flash then your bulb is not damage. but if you can't even high beam then the bulb is damage

there is no low beam and no high beam after i start my engine...in other words no headlights at all

 

but i still can flash, so i m confused...flash as in i use the "passing" switch

[WingZer0]

try to take out the bulb first and spray some contact cleaners on the H4 legs...if still don't work try another bulb, if really cannot means ur wiring could be screwed up....

[HondaSuperFourHSF]

Originally posted by bgoy@Jul 18 2006, 05:01 PM

there is no low beam and no high beam after i start my engine...in other words no headlights at all

 

but i still can flash, so i m confused...flash as in i use the "passing" switch

from what i see its because of wire short or fuse damage. Try to find the root cause. its definite not bulb damage

[bgoy]

hi wingzero and hsf, prob solved (hopefully)

 

its e wiring

i replaced e bulb still no use, turns out it was e wire connecting to e bulb which needs replacement...now ok

 

so if anybody's bike has no high beam or low beam but can still flash using the 'passing' switch, pls check ur wiring

[RedHare]

Hi there... I m looking for S4 Spec II or III. Most of the Motortiam quote me SpecII for 6000-7000. I found one Spec III quote me OTR 10000+ izzit expensive ? As wat I know first hand cost around 13000. Anyone letting go their bike?

[dryweeds]

hello all. me newbie. just got my bike recently version R.

kindly advise in future. thank you thank you

[HondaSuperFourHSF]

Originally posted by dryweeds@Jul 19 2006, 03:21 AM

hello all. me newbie. just got my bike recently version R.

kindly advise in future. thank you thank you

Welcome to S4 family.

You have just got a good bike.

[xb84]

is tyre change a simple job that can be done swee swee at any shop?

[HondaSuperFourHSF]

yes yes

[Kuro_Tenshi]

hi, erm.. sorry for asking stupid question.. but does anybody knows how much does a S4 roughly cost? which do you guys suggest for a budget and good ride? Spec 1? how much does it cost? thanks in advance. too busy working to be able to go down shops and check.

[dryweeds]

Originally posted by HondaSuperFour(HSF)@Jul 19 2006, 10:12 AM

Welcome to S4 family.

You have just got a good bike.

thank you thank you.

 

hope so...

so far dunno how to diagnose problems yet

 

cheers

 

any S4 guys and gals wanna show me some ropes?

 

currently trying to source for box bracke....