Honda Varadero 1K

[Don Didie]

VVVV> Bro ,Bobo e other malay guy is oso interested in e undercowl.fyi so maybe next meet or tis few days i will pass u e $$...so far how many confirm e undercowl proj. can u post ur front metal bar for our viewing.

[VVVV]

Originally posted by Don Didie@Apr 6 2005, 01:42 AM

HELL YEAH!!!!!! VVVV 'THE FabRicaTor' e man for e job (HEAD of R & D Dept).

:bouncefire:

Didie >>

Did you just arrow me for more work? You Gd hor. I'll REMEMBER you bro.....I wait for my chance to attack back ...kekeke :-)

BTW Bro, the pic you show me last night in your O2, the one bottom pannier tat look like UFO. Quite nice actually hor? Not much protection but look factor quite cool. Maybe I can try also...... As for the deflector, you figure tat one lah..

 

Keihin >>

Ok lah for you I accept MASTERS / VISA..hahaha...Actually, trade-in also can. I'll take your monster crush bar to fabricate..Kekeke...

 

Da Beast >>

Your suggestion of another new Project no.6...must give me some time to figure out tat one.

 

elws >>

Ohlins nice....It's in my wish list. Wondering if my wife can buy for me BirthDay?Haha...Yesturday, we were talking about the $$ making for the CLUB. Maybe you should PM Varas discuss with him. Put it in a nice web site when we have more items to sell, then generate some $$ from export & use the funds for CLUB trips & kopi drinks..

 

60km/h >>

You have all my support.!

 

David >>

Last week no come, this week also no come?

 

Trex >>

The 7000 km man....Nice to meet you Kami. Hope we can ride trip together sometime soon.

 

Bochap >>

Give you $$ you don't want..Alamak. Ringgit I also have lah. Give you next time.

 

Neo >>

Nice to meet you for the first time too. About the 620 thingy, I'll try to come over this coming weekend. I sms you OK. I'm scare too tat my wife leave me if I buy second bike ...kekeke...WHY must we married men suffer like tat...Hahahaha....

 

Bagahera >>

Bro, You confirm taking over Ami's Touratech bottom plate? If so, let me get the measurement first. Some brothers who don't want the full crowl might want to consider the smaller skid plate.

 

Naz >>

Gd to see you again.

[bagahera]

Originally posted by Varas@Apr 5 2005, 07:26 PM

Ok time for a serious note, the exhaust I am getting for you guys are all ROAD LEGAL , but for the inspection in Sg , I am clueless... Certificate would be provided to prove it's road legal .. So the procedure to get it approved in SG .. I, seriously am clueless. Maybe Smicerboy could help with the procedures. Cos his arrows are approved in LTA , he rode his bike there to get it done

 

Another thing is, Euro standard of emmision is world standard. So if u pass that , LTA standards are childs play. All vehicles in the world , are complying to EURO emmission standard, so LTA can go fly kite. I am trying to say , if this pipes are approved in the Euro side, don't see no reason its not here in Sillypore.

Varas,

 

elws seems to know exactly how to get it approved by LTA - he's got his Leo Vince at home now so I guess he will go first: and the rest of us can follow... hehe

 

As for passing inspection, vthumper just told me y'day he just passed VICOM inspection with his LASER racing pipes! Like that I don't think we should have a problem man!

 

BTW, does Leo Vince have a racing version of the pipes? Humm, maybe that will sounds like vthumpers? His one got some extra accessory mounted that lowers the dB and creates better back-pressure in the exhaust though...

 

Can the co give us a better estimate on airfreight in for the pipes? Could be a significant increase to the price and needs to be calculated in the total.

[KeiHiN]

VVVV >>> haahaahaa no need to take my crash bar lar ya bar can liao juz do extention can liao heehee

[VVVV]

Originally posted by Don Didie@Apr 6 2005, 11:31 AM

VVVV> Bro ,Bobo e other malay guy is oso interested in e undercowl.fyi so maybe next meet or tis few days i will pass u e $$...so far how many confirm e undercowl proj. can u post ur front metal bar for our viewing.

Didie >>

Yep, he did told me he interested too in the crowl project last nite.

I'll take pictures of the front headlight bar tonight and post it tomorrow.

 

 

 

Rest of Bros>>

OK, back to business:

Final changes for the metal undercrowl after last night inspection & discussion...

 

-Front sliding arch to reverse 10mm closer to the engine and increase tilt of another 20 degrees backwards

-Front arch also increase by height another 25mm upwards

-Side wings increase tilt from 45 degrees to full 90 degrees inwards

-Increase in height on the side wing at front portion to cover up fuel pump section

-160mm shorten tail for V1K using SW Motech main stand.

-Engine oil drainage screw exposed for ease of DIY oil change at home

 

THIS IS THE FINAL CHANGES. Insert your Name & main stand BRAND if you are in.

Deadline for order is 13 April 2005 (by next CLUB meet day)

 

(1)SimplyBochap (Hepco&B mainstand)

(2)VVVV (Hepco&B mainstand)

(3)VThrumper (Hepco&B mainstand)

(4)

(5)

(6)

 

Note: This is a CONFIRMED list. Don't put in your name if you're no sure yet!

$Price around S$150.

Project to be complete & delivery expected at end of this month.

Forward $100 as deposit at next week meet for bros in the list.

[Don Didie]

Originally posted by VVVV@Apr 6 2005, 12:13 PM

Didie >>

Did you just arrow me for more work? You Gd hor. I'll REMEMBER you bro.....I wait for my chance to attack back ...kekeke :-)

VVVV>Bro tt was not h/ever its ur new post upgraded.U should be proud of it cos u really have e ability to do it not only good but realiable,Babe. david did came down e last time round only tt u left early.

 

Well as requested by u e pic of the undercowl.

[Varas]

Baga>> shipping as per stated , the more item ordered the cheaper it would be. So I need to know how many pipes u guys getting.

 

As per quoted by the other side

Shipping:

The price for shipping 1 item with normal Post-Service is 52,-Euro=111,-SGD.But it will be cheaper shipping more.For example 2-3 items costs 82,-Euro=175SGD.

I will try to find out the cheapest way to ship,but before I must know how much items it will be.

 

So if 3 bros getting it , shipping would bem more or less 175/3 = 60 sgd roughly.

 

As for sound, Leo vince got racing pipes. But u wouldn't want to go there as its like honey attracting the bees on the road as ROV would know that you be coming.

For the SBK, there's this thing call db killer, which you could removed it if u like. Then it would become a straight through pipe, which equates to LOUD. kekekeke

 

So If you guys are interested , just list down ur name and which model you would like. Once we have a number of orders, only then we could get a exact price of postage. Easy as that ....

 

So who's game for it?

 

1. Varas (Alu)

[Varas]

Metal Crowl Namelist

 

-Front sliding arch to reverse 10mm closer to the engine and increase tilt of another 20 degrees backwards

-Front arch also increase by height another 25mm upwards

-Side wings increase tilt from 45 degrees to full 90 degrees inwards

-Increase in height on the side wing at front portion to cover up fuel pump section

-160mm shorten tail for V1K using SW Motech main stand.

-Engine oil drainage screw exposed for ease of DIY oil change at home

 

THIS IS THE FINAL CHANGES. Insert your Name & main stand BRAND if you are in.

Deadline for order is 13 April 2005 (by next CLUB meet day)

 

(1)SimplyBochap (Hepco&B mainstand)

(2)VVVV (Hepco&B mainstand)

(3)VThrumper (Hepco&B mainstand)

(4)Varas (SW Motech)

(5)

(6)

[Pro Dero]

smicerboy

 

Order for VARA polo & sticker:

 

1. pro dero 2 large, sticker 3pcs

2. werxguy 2 large, sticker 4pcs

3. mix master 1 sticker

 

[SimplyBoChap]

Originally posted by Don Didie@Apr 6 2005, 01:42 AM

BoChap>Well I suppose most if not all e stuff we discussed R not for U...FYI we VARA r like a Formula 1 Team ...building stuff to make our machine look good and aerodynamicaly functionable..remember I still need to rent e wind tunnel machine fr SAUBER PETRONAS for our prototype GADGETS once fitted... HELL YEAH!!!!!! VVVV 'THE FabRicaTor' e man for e job (HEAD of R & D Dept).

:bouncefire:

Yeah i forgot I only race with Merc Coupe U race with Carrera 3 Anyway i will be going to cross 3 borders when i ORD next year mah so less extensions of the bike 4 me will be better Hope to cross 5 though but read that its almost impossible 4 the commie states.

[SimplyBoChap]

Originally posted by VVVV@Apr 6 2005, 02:31 PM

Forward $100 as deposit at next week meet for bros in the list.

can meet u on sat or sun might not be free next week

[VVVV]

Originally posted by SimplyBoChap@Apr 6 2005, 11:45 PM

can meet u on sat or sun might not be free next week

Bochap >>

Bro, OK your order is already confirmed Deposit $ no problem. Pass me the next time we see each other, no need rush...

 

Didie >>

I know tat you are real interested but yours are different. Lets meet one night. Let me measure your FI under crowl assembly. I'll custom one piece for you according to your FI sizing. The base plate should be around the same, only minor changes to my metal crowl mounting points. This is a gd chances to fabricate together and the price will be around same.... I offer my service already, don't say nobody play with your FI, OK steady? Kekeke.....

 

Varas >>

OK Babe, I roger your order

[KeiHiN]

http://photos.friendster.com/photos/00/38/2418300/11313494642591l.jpg

 

oioi check this out!!

[smicerboy]

Metal Crowl Namelist

 

-Front sliding arch to reverse 10mm closer to the engine and increase tilt of another 20 degrees backwards

-Front arch also increase by height another 25mm upwards

-Side wings increase tilt from 45 degrees to full 90 degrees inwards

-Increase in height on the side wing at front portion to cover up fuel pump section

-160mm shorten tail for V1K using SW Motech main stand.

-Engine oil drainage screw exposed for ease of DIY oil change at home

 

THIS IS THE FINAL CHANGES. Insert your Name & main stand BRAND if you are in.

Deadline for order is 13 April 2005 (by next CLUB meet day)

 

(1)SimplyBochap (Hepco&B mainstand)

(2)VVVV (Hepco&B mainstand)

(3)VThrumper (Hepco&B mainstand)

(4)Varas (SW Motech)

(5)smicerboy(SW Motech)

(6)

[smicerboy]

Originally posted by bagahera@Apr 5 2005, 06:18 PM

I am interested in the exhaust man, but don't know much about Leo Vince - can tell me more? I saw some comments last time that it's no good, but maybe better now?

 

How's the sound? If sound anything like Amys laser I'm in man!

 

As for the VAT I think they can be persuaded weather we got company or not. Last time when I bot from David Silverspare's in UK they discounted me the VAT even though I shipped to Sweden just cos I charged it to a singapore credit card! I talked myself to that discount... hehe

 

Also, what is the main difference in the material for the exhaust, is it just durability or has it got other properties also?

ha....u buying just for the sound.....any material will do lah......

[smicerboy]

Originally posted by ATwin@Apr 6 2005, 01:49 AM

Bro Sam still in singapore......Everyday miss his thai gf...plan to fly over there maybe in

april....everynite got long distance call...miss her deep deep :lovestruck:

wei chi mong kok...............

 

hahaha...joking....

[VVVV]

Originally posted by smicerboy@Apr 7 2005, 10:47 AM

ha....u buying just for the sound.....any material will do lah......

bagahera >>

Maybe I should try frabricating even the exhaust pipe since sound is your concern.. Kekeke......

 

The Rest >>

Project 4 is coming up in May. If there's alot of ppl wanting the Touratech look alike metal chain guard. I will order a brand new TOURATECH chain guard to fabricate. elws can order a new piece for $120 including shipment. Copied would probably cost half price maybe around $60... Any interested party? Note: Keihin & Vthrumper excluded cause you have hugger. Cannot use together with hugger this one.

And Fredrick pls don't ask me to make metal hugger ley...I cannot do it.. it cannot be done..No negotiation on tat Hahaha.... more cheers to J Walker

[bagahera]

Varas,

 

Was checking the Leo Vince website and it only stated the SBK exhaust available for the 2004 ABS model.

 

Would assume it's not exactly the same as for the 2002? Can you confirm again with the co that the exhause will fit out 2002 bikes?

 

Thanks dude.

 

Guys,

 

I don't just want the sound - I want EVERYTHING!!! But the sound damn solid...

 

VVVV> hugger lah!!!

 

[Varas]

baga>> I want everything too hahahahha, I checked with them . This is the reply.

 

Hi Jason

> > And yes the exhaust system is compatible with Varadero from 2002-

> > 2004 but all the older Modells will also be compatible.

> >

> > Regards

> > Elke

 

Don't wait already Baga, time for some sweet action

 

I would be ordering this month end, so bros who r interested. Let me see a show of names so I could give them a rough number to calculate freight cost. If ok , then I will comfirm order by end of the month.

 

So I need to know how many interested so I could get a quote by next week inclusive of freight.

 

yo guys , save the cash

 

http://i11.ebayimg.com/03/i/03/c4/f6/30_2.JPG

 

is this what u all want??

 

http://i20.ebayimg.com/02/i/03/c5/01/be_1.JPG

 

then go to

 

CLICK ME

[60kmh]

Originally posted by Varas@Apr 7 2005, 08:10 PM

baga>> I want everything too hahahahha, I checked with them . This is the reply.

 

Hi Jason

> > And yes the exhaust system is compatible with Varadero from 2002-

> > 2004 but all the older Modells will also be compatible.

> >

> > Regards

> > Elke

 

Don't wait already Baga, time for some sweet action

 

I would be ordering this month end, so bros who r interested. Let me see a show of names so I could give them a rough number to calculate freight cost. If ok , then I will comfirm order by end of the month.

 

So I need to know how many interested so I could get a quote by next week inclusive of freight.

 

yo guys , save the cash

 

http://i11.ebayimg.com/03/i/03/c4/f6/30_2.JPG

 

is this what u all want??

 

http://i20.ebayimg.com/02/i/03/c5/01/be_1.JPG

 

then go to

 

CLICK ME

Varas>>> I want this!!!

 

VVVV>>>As for my main stand I don't know the brand leh...how ar?

[ATwin]

Originally posted by VVVV@Apr 7 2005, 05:18 PM

bagahera >>

Maybe I should try frabricating even the exhaust pipe since sound is your concern.. Kekeke......

 

The Rest >>

Project 4 is coming up in May. If there's alot of ppl wanting the Touratech look alike metal chain guard. I will order a brand new TOURATECH chain guard to fabricate. elws can order a new piece for $120 including shipment. Copied would probably cost half price maybe around $60... Any interested party? Note: Keihin & Vthrumper excluded cause you have hugger. Cannot use together with hugger this one.

And Fredrick pls don't ask me to make metal hugger ley...I cannot do it.. it cannot be done..No negotiation on tat Hahaha.... more cheers to J Walker

VVV>>

Brudder ...i'm meeting my touratech friend 2mor nite @ my place for kopi session.

I can help u to check the price for that if possible i will get the catalogue for u guys to cc

look look......if possible i will invite him next tue...hope he will shown u what he can and give us a big discount.

[elws]

ATwin> Out of curosity wat is the name of ur Touratech Frd.

[VVVV]

Originally posted by 60km/h@Apr 7 2005, 08:57 PM

Varas>>> I want this!!!

 

VVVV>>>As for my main stand I don't know the brand leh...how ar?

 

 

60km/h >>

No problem. I have done some research already...Let me see your main stand...I see and I'll know. Most probably SW Motech. Wan to meet me when?

 

Bagahera >>

Same answer regards to metal hugger...NO! Hahaha.....

 

Varas >>

ROMAtech... it's good price thou...you bid for it ley..then I duplicate...Kekeke...can?

 

Didie >>

See picture.

 

Rest of Brothers>>

This is my finished PROJECT 3, fully stainless steel & light weight. Anyone interested? Item is now fixed on to my ride & ready for your inspection...Kekeke...

 

 

http://i3.photobucket.com/albums/y88/robin_lim/Dsc00143.jpg

[smicerboy]

VVVV>>regarding yr headlight protector....wat abt those bike w/o front fender?? the guard will be a slight different 1?? if its the same as yrs...think a bit O biang....

[60kmh]

Originally posted by elws@Apr 7 2005, 09:40 PM

ATwin> Out of curosity wat is the name of ur Touratech Frd.

elws>>> That guy u know him lah......riding BMW...