SBF MaxSym Cafe

[naim]

Anyone experienced knocking sound came from the engine or rear tyre?

 

When does this happen? For me, i do experience some rattling noise upon slowing down. Usually when the transmission alot of dust and dirt wen long time nv service. No issue. Try and narrow down on where the noise come frm.

[Kumar_83]

Trade in for tyres? Never heard of it... To say the truth, those who know better secretly call the stock tyres "Suicide Tyres". Which nearly became true for me too several times when I was still on them... But actually if your bike is only used for going straight, and in good weather, then they're okay.

 

Bro... its not so bad lah. Don scare ppl like that leh.

 

I still on stock, 11k plus mileage still ok lah. Not eaxactly all straight. Wet road just don't push it.

 

Anyway if wet road, no matter how good tyres I am on, I will not push it. The so called best wet rd tyres like Michelin pilot rd 3 also has its limitations. I have tried and have experienced skid as well (on a diff bike).

 

So it all boils down to rider control. React wisely to road conditions and know your limitations. All will be good.

 

Cheers all n ride safe!

[duriandan]

Bro... its not so bad lah. Don scare ppl like that leh.

 

I still on stock, 11k plus mileage still ok lah. Not eaxactly all straight. Wet road just don't push it.

 

Anyway if wet road, no matter how good tyres I am on, I will not push it. The so called best wet rd tyres like Michelin pilot rd 3 also has its limitations. I have tried and have experienced skid as well (on a diff bike).

 

So it all boils down to rider control. React wisely to road conditions and know your limitations. All will be good.

 

Cheers all n ride safe!

 

Haha! Okay, okay. Full disclosure: I've done Genting, Bukit Tinggi, Cameron, and other twisty country roads with them. And I survived! Just a little "exciting"! ;P

[vinz74]

Ok! Point noted... so stocks still not so bad . But if got chance will change to better ones. It is the only rubber that contact to ground. Safety 1st!!!

 

Sent from my GT-N7105 using Tapatalk 4 Beta

[duriandan]

Ok! Point noted... so stocks still not so bad . But if got chance will change to better ones. It is the only rubber that contact to ground. Safety 1st!!!

 

Sent from my GT-N7105 using Tapatalk 4 Beta

 

Yup, after Durex, tyres are the most important rubber.

[rokoshuo]

Any bros out there got workshop lobangs for installation of speakers on rear box and front compartments? Just saw a piaggo MP3 few days back with sound system in front compartment. Buay tahan liao! Haha!

[Little potato]

Thanks naim..when it slow down than the knocking sound come from the engine.

May I know which shop can do the cleaning n how much it cost?

[naim]

Thanks naim..when it slow down than the knocking sound come from the engine.

May I know which shop can do the cleaning n how much it cost?

 

Nt sure should be in the region of $40. Taihin or ACM.

[vinz74]

Nt sure should be in the region of $40. Taihin or ACM.

 

Just curious what is the cause of the knocking sound?

 

Sent from my GT-N7105 using Tapatalk 4 Beta

[naim]

Just curious what is the cause of the knocking sound?

 

Sent from my GT-N7105 using Tapatalk 4 Beta

 

Either the belt or the rollers. Dust build-up prevent the smooth movement of the parts inside the transmission. Actually i can clean the CVT as well. Can contact me. Cux i knw some of u guys have trouble trying to go to shops during office hours.

[Coyote66]

Either the belt or the rollers. Dust build-up prevent the smooth movement of the parts inside the transmission. Actually i can clean the CVT as well. Can contact me. Cux i knw some of u guys have trouble trying to go to shops during office hours.

 

Bro u r super

U can be the chairman of maxsym club if not the technical advisor

[Suede]

Hi guys. Im newbie here on MAXSYM. Quoted for 12.3K and trade in my gilera runner so total cost 9.3K. Will getting my MAXSYM around next week Monday or Tuesday. So what are the basic maintenance shall i look after? Engine oil, oil filter, spark plug and gear oil at which interval must i change? I understand at 15 000km must change everything so pls do advise this newbie hehehe.

[naim]

Bro u r super

U can be the chairman of maxsym club if not the technical advisor

 

Lol. Bro dont say until like that la. haha. Just willing to help fellow riders here. Change belt or rollers i can help. Charge u guys abit for materials la (brake cleaner, grease, etc). Yet to get the tools to do the clutch assembly though.

[naim]

Hi guys. Im newbie here on MAXSYM. Quoted for 12.3K and trade in my gilera runner so total cost 9.3K. Will getting my MAXSYM around next week Monday or Tuesday. So what are the basic maintenance shall i look after? Engine oil, oil filter, spark plug and gear oil at which interval must i change? I understand at 15 000km must change everything so pls do advise this newbie hehehe.

 

EO with filter every 5k. Spark plug 15k or 20k also can. Gear oil every 10k.

[Suede]

EO with filter every 5k. Spark plug 15k or 20k also can. Gear oil every 10k.

 

Thanks senior

[Coyote66]

Lol. Bro dont say until like that la. haha. Just willing to help fellow riders here. Change belt or rollers i can help. Charge u guys abit for materials la (brake cleaner, grease, etc). Yet to get the tools to do the clutch assembly though.

 

I meant it in a good way

I can see u are very technical savvy and helpful

And most important of all active

U definitely have my support

[naim]

I meant it in a good way

I can see u are very technical savvy and helpful

And most important of all active

U definitely have my support

 

Haha thanks bro. Im just the type of person who wont pay others to do things that i can do. Mechs will nv be as meticulous since time is money. Do myself can do it slowly and neatly.

[Little potato]

Thanks to Naim for cleaning my transmission just now.

He done a wonderful job n now my maxsym is smooth as new.

[lawr3nc3]

Haha thanks bro. Im just the type of person who wont pay others to do things that i can do. Mechs will nv be as meticulous since time is money. Do myself can do it slowly and neatly.

 

Naim, ur number please.. For next 20000k servicing booking.

[naim]

Thanks to Naim for cleaning my transmission just now.

He done a wonderful job n now my maxsym is smooth as new.

 

Ur welcome bro.

 

Naim, ur number please.. For next 20000k servicing booking.

 

90038577. I can clean CVT, change belt, rollers, etc. I'm free on most weekday nights.

[Kumar_83]

How about engine oil, oil filter and gear oil change bro? Can do?

[naim]

How about engine oil, oil filter and gear oil change bro? Can do?

 

Can also bro. Hws ur box? Ok alr?

[rusty83]

Hey niam bro, what kind of tools is needed to open up the transmission and the access the clutch and belt? I wanna try diy too if its not too complicated..hehe

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

[naim]

Hey niam bro, what kind of tools is needed to open up the transmission and the access the clutch and belt? I wanna try diy too if its not too complicated..hehe

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

 

Mainly is the electric impact wrench. Can take a look at my youtube channel got one vid of my doing the CVT.

[Kumar_83]

Can also bro. Hws ur box? Ok alr?

 

Box they giving 1 to 1 exchange. Ill probably be using it for temp purpose and will be getting a GIVI.

 

Mah has priced GIVI at exorbitant rates. Ebay italy including shipping is way cheaper than getting it locally.. How ridiculous.

 

Mah must order and wait 2 months some more. Waste ppl time.