Custom made Single sitter

[fidz07]

anybody can reccomend where to custom made single sitter..? it's for a krr 150...

[standlee]

Originally posted by fidz07@Mar 17 2005, 11:43 AM

anybody can reccomend where to custom made single sitter..? it's for a krr 150...

i think LAB should have sell the ready made ones.

[Cow]

sorry

 

how abt sp one seater?

[standlee]

Originally posted by Avita@Mar 19 2005, 06:21 PM

sorry

 

how abt sp one seater?

definitely LAB as well..

[Cow]

anyone know the market range? the one seater is cum with the tailboard or just a seat to cover the pillion seat?

[560FiveSixty]

Originally posted by Avita@Mar 23 2005, 09:18 PM

anyone know the market range? the one seater is cum with the tailboard or just a seat to cover the pillion seat?

Yo so how issit? still looking for the single seater which we were talking bout it 2-3 weeks ago? these coming weeks i kinda free liao. Gonna recce for single seater too.

[standlee]

Originally posted by Avita@Mar 23 2005, 09:18 PM

anyone know the market range? the one seater is cum with the tailboard or just a seat to cover the pillion seat?

referring to the one tat attaches the tail fairings & the seat.

[scooterer]

I'm looking for a somone who can do custom panels for the bike too (custom fairing- fibreglass is ok)

 

Anyone know a shop that can do this?

[bo mai lah]

Originally posted by scooterer@Mar 24 2005, 08:07 AM

I'm looking for a somone who can do custom panels for the bike too (custom fairing- fibreglass is ok)

 

Anyone know a shop that can do this?

hi bro. i got a contact that does custom fiberglass moulding. however, i think they require a certain amount of orders be4 they manufautre the custom part for u. Reasoning being tat it will cost cheaper if it's mass produce. i think 10 or more pieces is sufficient to get the thing moving

[Cow]

i don mind having a one seater mould made for my sp if there is..

[standlee]

Originally posted by Avita@Mar 25 2005, 12:21 AM

i don mind having a one seater mould made for my sp if there is..

i saw ready made ones hanging @ LAB couple days back.

[Cow]

u know the price of it?

[standlee]

Originally posted by Avita@Mar 28 2005, 09:08 PM

u know the price of it?

nope, didn't ask since i wasn't going to buy it..

[HondaYamaha]

Originally posted by standlee@Mar 28 2005, 10:26 PM

nope, didn't ask since i wasn't going to buy it..

got 4 cbr 400?prefer fiber glass mould.those sharp end 1 but 2 seat....any1 noes?

[StingRhea]

cbr400 can go to dynamic bike centre just after JR pte ltd~ look for ah seng~ say ray kai siao u go~

[standlee]

Originally posted by tzmm@Mar 28 2005, 11:15 PM

got 4 cbr 400?prefer fiber glass mould.those sharp end 1 but 2 seat....any1 noes?

the fibre moulding shop above ubi sticker shop. 4th floor, mr lim. in order to make it like those sharped ended pointed tails, they actually have to break off ur sub frame to do it. though u can get it weld back in the future if u should have a change of mind.

[HondaYamaha]

Originally posted by StingRhea@Mar 28 2005, 11:26 PM

cbr400 can go to dynamic bike centre just after JR pte ltd~ look for ah seng~ say ray kai siao u go~

ok bro...will check it out this few days...roughly how much?

[HondaYamaha]

Originally posted by standlee@Mar 28 2005, 11:35 PM

the fibre moulding shop above ubi sticker shop. 4th floor, mr lim. in order to make it like those sharped ended pointed tails, they actually have to break off ur sub frame to do it. though u can get it weld back in the future if u should have a change of mind.

wah....tink better not lah....last time my tzm also juz mould the tail sharp onli...my fren modify the sub frame,after his bike corner n balance no gd....

[Cow]

is the moulding of sharp tail applicable to sp?cause i see krr, tzm all got sharp tail but havent really saw one on a sp

[standlee]

Originally posted by Avita@Mar 29 2005, 08:27 PM

is the moulding of sharp tail applicable to sp?cause i see krr, tzm all got sharp tail but havent really saw one on a sp

yup, anything can be moulded as long as u can pay for it.

 

there r quite a couple of fibre moulding shops ard, u could probably go ask ard first.

[standlee]

Originally posted by tzmm@Mar 29 2005, 12:42 AM

wah....tink better not lah....last time my tzm also juz mould the tail sharp onli...my fren modify the sub frame,after his bike corner n balance no gd....

i do agree on some part.

 

juz moulding & attaching gives u a sharp tail, if u wan it to be sharp & ponted UP, then u need to cut off the subframe.

[Cow]

those shops doing the moulding are like? very new to the biking world so not sure where i can go see those shops

[standlee]

Originally posted by Avita@Apr 1 2005, 12:37 PM

those shops doing the moulding are like? very new to the biking world so not sure where i can go see those shops

u may need to ask ard. one of them is above the ubi sticker shop..

[hafizdyfectra]

Originally posted by standlee@Mar 28 2005, 11:35 PM

the fibre moulding shop above ubi sticker shop. 4th floor, mr lim. in order to make it like those sharped ended pointed tails, they actually have to break off ur sub frame to do it. though u can get it weld back in the future if u should have a change of mind.

where is ubi stiker shop exactly....? at ubi inds est..?

[Guest motofreak]

Its the block infront of First Motor. Jus across the road from TP HQ