[Group] Sach Madass 125CC

[red rocket]

Would prefer places with seats..also all can view the bikes.

 

Ex: Kallang KFC / West Coast Park Mcdonald's / East Coast Park Burger King etc...

 

East coast is good... can tok and makan

[kidheck]

Hi guys, so far majority says ECP. Not a bad idea I thought so myself. The problem is, Burger King and McDonalds are tie on places to eat. Frankly, I prefer Ronald to the King himself.

 

Only issue most have is having to work morning shift on Monday. Too bad, I'm on night shift next week. No seriously, I don't think we'll be staying that late so that's not much of an issue.

 

Ya, attendance is open to public so ya, you are invited. And you, you too and not forgetting you. You, yup you and did I mentioned you?

 

You are invited too Mr Morrocan (xtense).

[blkjack]

so it's going to be Sat or Sunday??? Wat time?? Prefer to meet up during the day... at least can have a better view of each other bikes.

 

If meet up at ronald's parking might be a issue... crowd at ronald is massive....but if meet up at B.K.. there's a parking lot which is big enough for all to view each other bikes.....

 

Wat's yr view ppl?

[HYB80Y]

For the exhausts as far as i know there is no brand who mod special exhausts for madasses except OO racing but here in morocco i can find a lot of Chinese counterfeiting ( Rymco, docker, lancen) and its very cheap (around 45-50 USD ) i'll post some pics soon

PS : Sorry for my english , its the most worse english of the world

 

oh dude you are from morocco? that's a long way from here! Welcome welcome! do post the pics soon. i'm very interested. especially when the price is so attractive.

[HYB80Y]

Hi guys... Gentle reminder... Kid had arranged meeting tis weekend 29th June. Venue has yet to be decided. Mails had been sent out to relevant interested parties.

 

None replied so far for venue suggestions. Check yr mails yet?

 

Saturday, i dun think i can make it as i'm working leh.

[blkjack]

Saturday, i dun think i can make it as i'm working leh.

 

Sunday is also fine with me....

[red rocket]

Hi guys, so far majority says ECP. Not a bad idea I thought so myself. The problem is, Burger King and McDonalds are tie on places to eat. Frankly, I prefer Ronald to the King himself.

 

Only issue most have is having to work morning shift on Monday. Too bad, I'm on night shift next week. No seriously, I don't think we'll be staying that late so that's not much of an issue.

 

Ya, attendance is open to public so ya, you are invited. And you, you too and not forgetting you. You, yup you and did I mentioned you?

 

You are invited too Mr Morrocan (xtense).

 

 

Meet up Sunday for lunch at noon?

[blkjack]

lunch time is good.

[blkjack]

Just to share.. am looking for a 24mm carb. Likely to get one of this. Pics speaks a thousand words.....

 

YOSHIMURA-MIKUNI TMR-MJN

 

MJN Carburetor / Theory is simple!

 

The reasons are as follows;

 

1) MJN system can atomize fuel much better than ordinary solid type needles.

2) It is because MJN nozzle controls the amount of fuel in proportion to the throttle opening (the air), by numbers of accurately drilled small holes.

3) Better atomized fuel gives better throttle response as well as better fuel efficiencies.

4) Also, MJN system can supply the fuel through the MJN nozzle which locates at the center of the bore where air speed is the fastest. This also atomizes fuel even better! Another very important theory of MJN system is when the throttle is shut off for engine braking, very minimal amount of fuel is guided into the intake ports. Therefore remarkable recovering acceleration can be obtained.

[blkjack]

was quoted $520 inclusive of installation. It will include carb. & silver metal air-pod (as seen in pics 2)

 

Likely to invest my $$ into....

[HYB80Y]

was quoted $520 inclusive of installation. It will include carb. & silver metal air-pod (as seen in pics 2)

 

Likely to invest my $$ into....

 

you got money plant at home huh?

[red rocket]

was quoted $520 inclusive of installation. It will include carb. & silver metal air-pod (as seen in pics 2)

 

Likely to invest my $$ into....

 

Wah that's one expensive Carb... anything cheaper?

[blkjack]

Wah that's one expensive Carb... anything cheaper?

 

well.. all yoshi stuffs are ex. bros... Made in Nippon are always ex. but it works... regular carbs usually cost ard 120 - 200.. 2nd hands of course much cheaper lah.

 

No. I do not plant $ at home... if you got any seeds that can grow $.. please recommend...coz I also wish to grow a hectre or two ...

 

Please leh.. good stuffs dun come cheap.. cheap stuff dun come good. Sometimes branded stuffs are worth extra $ to pay coz it really works. Of coz now I dun yet lah... but i will certainly be much willing to skip a lunch or 2to get this carb. or sometik close.

 

Well I am not in a rush.. so shall scout around for cheaper or better stuffs for tis bike..

[DazeWei]

omg . . nice bike u all have . .

[blkjack]

omg . . nice bike u all have . .

 

Thank you... Xie..xie... Kiam seah..... fun bike to ride. What bike you riding?

[mod]

Just to share.. am looking for a 24mm carb. Likely to get one of this. Pics speaks a thousand words.....

 

YOSHIMURA-MIKUNI TMR-MJN

 

MJN Carburetor / Theory is simple!

 

The reasons are as follows;

 

1) MJN system can atomize fuel much better than ordinary solid type needles.

2) It is because MJN nozzle controls the amount of fuel in proportion to the throttle opening (the air), by numbers of accurately drilled small holes.

3) Better atomized fuel gives better throttle response as well as better fuel efficiencies.

4) Also, MJN system can supply the fuel through the MJN nozzle which locates at the center of the bore where air speed is the fastest. This also atomizes fuel even better! Another very important theory of MJN system is when the throttle is shut off for engine braking, very minimal amount of fuel is guided into the intake ports. Therefore remarkable recovering acceleration can be obtained.

 

 

the carb is sweet..but apart from the manifold you will have problem with it..the reservoir at the bottom of the carb sure will hit your block...

im using mikuni too..if you wann keihin i can get for you..

 

i have been wanted to post my bike here..but i keep on forgetting to snap pictures of it...i try and have it posted here..

[blkjack]

the carb is sweet..but apart from the manifold you will have problem with it..the reservoir at the bottom of the carb sure will hit your block...

im using mikuni too..if you wann keihin i can get for you..

 

i have been wanted to post my bike here..but i keep on forgetting to snap pictures of it...i try and have it posted here..

 

 

Melts my heart after seeing this carb... I seriously dun mind paying big bike for such a beauty. I will head down to shop to see whether they are able to install or not 1st. Quotation given includes installation, so I guess if it doesn't fit they will not charge me.

 

If unable to then I will defintely need the carb. doesn't matter whether it's Kehin or Mikuni. Btw hw much it cost for Mikuni carb you currently using? Same as Kehin?

 

Been longing to view yr "ass" for quite some time now... was hoping you could make it this sunday (noon).....

[mod]

Melts my heart after seeing this carb... I seriously dun mind paying big bike for such a beauty. I will head down to shop to see whether they are able to install or not 1st. Quotation given includes installation, so I guess if it doesn't fit they will not charge me.

 

If unable to then I will defintely need the carb. doesn't matter whether it's Kehin or Mikuni. Btw hw much it cost for Mikuni carb you currently using? Same as Kehin?

 

Been longing to view yr "ass" for quite some time now... was hoping you could make it this sunday (noon).....

 

sunday noon i cant make it..im working..if its in the evening not a prob..

[blkjack]

Sigh... Was hoping to see yr bike tis wkend... evening I can't make it. My turn to work.. ke..ke...ke..

 

We arrange sometime next wk .. meet up for the parts?? Pm me.. let me knw when items are coming.

[LittleLamb]

Just to share.. am looking for a 24mm carb. Likely to get one of this. Pics speaks a thousand words.....

 

YOSHIMURA-MIKUNI TMR-MJN

 

MJN Carburetor / Theory is simple!

 

The reasons are as follows;

 

1) MJN system can atomize fuel much better than ordinary solid type needles.

2) It is because MJN nozzle controls the amount of fuel in proportion to the throttle opening (the air), by numbers of accurately drilled small holes.

3) Better atomized fuel gives better throttle response as well as better fuel efficiencies.

4) Also, MJN system can supply the fuel through the MJN nozzle which locates at the center of the bore where air speed is the fastest. This also atomizes fuel even better! Another very important theory of MJN system is when the throttle is shut off for engine braking, very minimal amount of fuel is guided into the intake ports. Therefore remarkable recovering acceleration can be obtained.

 

:nono: The Yoshi MJN is not a beauty.... when you see this:

http://www.motorplus-online.com/Articles%5CPrinting%5CIV%5C255%5CPictures%5C7318%5C7318-W120.jpg

 

The ultimate IMHO. :thumb: Splurge on this better.

[tiong79]

Hi guy any recommendation for the handle bar?

[blkjack]

:nono: The Yoshi MJN is not a beauty.... when you see this:

http://www.motorplus-online.com/Articles%5CPrinting%5CIV%5C255%5CPictures%5C7318%5C7318-W120.jpg

 

The ultimate IMHO. :thumb: Splurge on this better.

 

Hw much wil it cost? Seems quite big leh... this is very unlikely able to fit into My "ass" ke.eke.ke...... or our "asses" i shld say.....

 

[blkjack]

Hi guy any recommendation for the handle bar?

 

Got $.. fix pro-taper..... nice.. strong & reliable....

[kidheck]

You guys working on Sunday? That must've really sucked. Well, we can always postpone it to other weeks. As we agreed before, date, time and venue is upon everyone's convenience.

[blkjack]

well.. I am with the crowd. Just update me...