Woopa!! Cbr1000rr Riders

[guangson]

wah like tat means 121-410 fits like 04-07..... i tink sbf got 1 guy selling this model... hmm....

 

hmmmm. so 410 can fix on rr05 ar?? scare later buy from net, then cannot fix. then i suck thumb already..

 

anyway, what the price range for dyno run??

[craz_03]

hmmmm. so 410 can fix on rr05 ar?? scare later buy from net, then cannot fix. then i suck thumb already..

 

anyway, what the price range for dyno run??

 

hmzz..

the net selling cheaper ma???

i saw used pc3 on u.s. ebay like ard 190-200 usd..

which quite bo hua,

coz plus shipping n conversion also ard 400 bucks..

might as well buy a new one at 399... hmzz..

 

dynorun costs ard 120 - 150 i believe??

n installation of ignition module to maintain the firing rate...

[tom-kum-fai]

anything to help if there's a mild scraches on the speedo meter screen?

[craz_03]

anything to help if there's a mild scraches on the speedo meter screen?

 

not deep scratches ah??

 

hmzz... i have a gel based substance.. maybe u can try cleaning the screen to make the scratch go away??

 

juz some product i might be selling.. let u test test see if it works anot..

no charge de..

hee

[Yongster]

hmzz..

the net selling cheaper ma???

i saw used pc3 on u.s. ebay like ard 190-200 usd..

which quite bo hua,

coz plus shipping n conversion also ard 400 bucks..

might as well buy a new one at 399... hmzz..

 

dynorun costs ard 120 - 150 i believe??

n installation of ignition module to maintain the firing rate...

PC 3 costs $399? Got so cheap meh?? And 1 session costs around $200.... If you are lucky, mayb u can get $180......

[Tashi]

anything to help if there's a mild scraches on the speedo meter screen?

 

The best is to protect it with Raceshield, I had one custom made for the speedometer. When washing that part, no matter how lightly you rub it, it'll get scratched eventually.

[tom-kum-fai]

ok thanx haha. i getting one soon, anyway i reliase that my bracket the hold the clutch cable the one at the engine like loose like that, it can be push down and pull up is that normal? and if it's not what am i suppose to do!!!!

[tom-kum-fai]

the red circle is the thingy i'm talking about

[tom-kum-fai]

sorry better view

[prasad]

its meant to move wen you clutch in nice exhaust any way lolz

[tom-kum-fai]

its meant to move wen you clutch in nice exhaust any way lolz

Haha no la that pic i get from internet. No i know it will move when clutch in, what i meant was the thing can move up and down like loose from the engine, normally clutch in it move forward backward. It can be pull up and down for like 1mm like loose like that dunno is it that way or something wrong

[Yongster]

its meant to move wen you clutch in nice exhaust any way lolz

nice exhaust cos u using it rite??

[craz_03]

nice exhaust cos u using it rite??

 

u mean he using kr tuned from bikelab on the 08??

 

wah.....

so nice..

[craz_03]

btw,

i saw someone selling pc3 used, for ard 200+.. plus shipping maybe ard 290..

 

n btw, if buying those abs plastic farrings??

i saw on ebay cheapest is ard 640 sgd.. including shipping n paintwrk (any paintwork including repsol or rossi)...

 

anyone here can get cheaper?

[kinwei]

btw,

i saw someone selling pc3 used, for ard 200+.. plus shipping maybe ard 290..

 

n btw, if buying those abs plastic farrings??

i saw on ebay cheapest is ard 640 sgd.. including shipping n paintwrk (any paintwork including repsol or rossi)...

 

anyone here can get cheaper?

 

My advise is to get those fibreglass race fairing. Get those street version. More expensive but it worth the money. Reasons are,

 

1) The ABS fairing will warped from the heat by the header and mid pipe. You will need to wrap the exhaust and paste the fairing with heat wrap to prevent it from happening. This will add up to alot already.

 

2) The stock fairing installation is a bit*h. There are too many pieces. The aftermarket fairing only consist of the top and bottom fairing which makes installation simple.

 

3) The ebay ABS uses cheap ABS material. It will crack easily upon impact. By right fairing are supposed to provide a certain form of protection for the bike upon falling down. But a easily cracked plastic isn't going to do that. You will not only lose the fairing (Unrepairable) and might also cause your frame to scratch.

[kinwei]

Updated my sales thread,

 

1) Torn pillion seat for 2008/09 CBR 1000RR

 

2) New unused Raceshield headlight protector for 2008/09 CBR 1000RR

 

3) Arai FF

[craz_03]

My advise is to get those fibreglass race fairing. Get those street version. More expensive but it worth the money. Reasons are,

 

1) The ABS fairing will warped from the heat by the header and mid pipe. You will need to wrap the exhaust and paste the fairing with heat wrap to prevent it from happening. This will add up to alot already.

 

2) The stock fairing installation is a bit*h. There are too many pieces. The aftermarket fairing only consist of the top and bottom fairing which makes installation simple.

 

3) The ebay ABS uses cheap ABS material. It will crack easily upon impact. By right fairing are supposed to provide a certain form of protection for the bike upon falling down. But a easily cracked plastic isn't going to do that. You will not only lose the fairing (Unrepairable) and might also cause your frame to scratch.

 

icic..

i hesrd from holla that u have lobang for race farrings?? heehee

the abs i saw they got use the good quallity foam to protect the abs plastic..

n i know the abs plastic cracks upon impact... its juz the nice nice paintwrk i wan.. haahaa...

[kinwei]

icic..

i hesrd from holla that u have lobang for race farrings?? heehee

the abs i saw they got use the good quallity foam to protect the abs plastic..

n i know the abs plastic cracks upon impact... its juz the nice nice paintwrk i wan.. haahaa...

 

He anyhow say one.. Don't believe him . Foam as in the heat shield? So far I checked with 1000rr.net forum, they did lots of trial and error. The only solution is to wrap the header and paste heat shield on the fairing. The paint work is quite good for a china made. I am impressed as well. It is basically looks over function. But it is cheap to consider.

 

If you want value for money fiberglass street fairing, you can consider sebimoto which is brought in by Biketech21. But get ready for the long lead time if he do not have stock. Sharkskinz will be the best as it comes drilled. So it is easier to fix up.

[Imagirl]

Hello people i need help. I just passed my Class 2 this tuesday. Might be getting used CBR 1000 08 soon(any recommendation?). Have some questions as below

 

If i FULL CASH the bike(no loan from bike shop), meaning there is no agreement fee??

And if the initial machine price is $XXXX will it increase since they are not earning any interest from me?

 

What should i look out for? Mileage? Engine Problems???

 

Is there any warranty since the bike are still quite new???

 

PLEASE HELP. I AM A NOOB IN BUYING BIKE.

[craz_03]

He anyhow say one.. Don't believe him . Foam as in the heat shield? So far I checked with 1000rr.net forum, they did lots of trial and error. The only solution is to wrap the header and paste heat shield on the fairing. The paint work is quite good for a china made. I am impressed as well. It is basically looks over function. But it is cheap to consider.

the china made has heat shield. but my headers r nt wrapped. they come wif single seat also. holes r predrilled.

 

Hello people i need help. I just passed my Class 2 this tuesday. Might be getting used CBR 1000 08 soon(any recommendation?). Have some questions as below

 

If i FULL CASH the bike(no loan from bike shop), meaning there is no agreement fee??

And if the initial machine price is $XXXX will it increase since they are not earning any interest from me?

admin fees n processing fees r charged. they wld nt pull up the price. best get a cbr rider to go check wif u.

[DenverDino]

Hello people i need help. I just passed my Class 2 this tuesday. Might be getting used CBR 1000 08 soon(any recommendation?). Have some questions as below

 

If i FULL CASH the bike(no loan from bike shop), meaning there is no agreement fee??

And if the initial machine price is $XXXX will it increase since they are not earning any interest from me?

 

What should i look out for? Mileage? Engine Problems???

 

Is there any warranty since the bike are still quite new???

 

PLEASE HELP. I AM A NOOB IN BUYING BIKE.

 

Dont ever tell them u going to full cash...if you confirm then tell.

 

I saw one 2nd hand Black CBR 08 at Bike Production...condition very new. You can go n try. If you looking for brand new then go Loois Motor...Bike Production oso have if im not wrong.

 

I knew Loois price abit high... just dont know why i still support them.

[neishfez]

hello bros i would like to make an enquiry here... im ridin cbr1000rr 05... just wonderin if any1 sellin end can??? thank u very nice for ur replies..

[craz_03]

hello bros i would like to make an enquiry here... im ridin cbr1000rr 05... just wonderin if any1 sellin end can??? thank u very nice for ur replies..

 

tink currently no one selling it in the forum..

maybe u can try ebay for other countries?? they do sell quite a range over there..

mostly illegal..

legal pipes u can consider, arrow, leovince, or akra.. =)

 

i'm using akra carbon titanium with mid pipe..

legal..

costs ard 1.9k that time when bought..

[Yongster]

Hello people i need help. I just passed my Class 2 this tuesday. Might be getting used CBR 1000 08 soon(any recommendation?). Have some questions as below

 

If i FULL CASH the bike(no loan from bike shop), meaning there is no agreement fee??

And if the initial machine price is $XXXX will it increase since they are not earning any interest from me?

 

What should i look out for? Mileage? Engine Problems???

 

Is there any warranty since the bike are still quite new???

 

PLEASE HELP. I AM A NOOB IN BUYING BIKE.

by right if u full cash the bike, shouldn't have any agreement fees since no loan is being taken up... Get them to give u a detailed breakdown of all the charges in black and white.......Just like what Dino says, do not let them know u will be full cashing the bike.... Bikeshop sales person very weird wan.. They always assume u will be taking loan.... When u tell them u want to full cash the bike, their expression = Priceless........

 

When u getting a 2nd hand bike, I doubt it will be still under warranty from the authorised agent...... Most likely will be in-house warranty from the bike shop..... Try to ask for 2 months or minimum 1 month....... As for the bike condition.... Either u get some experienced biker frens to go with u or u can ask those bros riding the 08.....

 

Some of the areas that u should check are the swingarm, chassis, sub-frame, forks, radiator and rims...... These are the parts tat will suffer significant impact and damages when there is an accident and these are the parts that are very costly to replace..... Mileage wise...... Meter can be changed anytime so depends on how it look at it.... Extremely low mileage does not mean it is a good thing...... As for the engine, sadly u will only know whether it is problem free after u bought the bike....This is a risk u have to take when u buy a 2nd hand bike.... If you are not willing to take the risk, u can pay more for a 1st hand....... Very little or no bike shop will allow u to bring the bike out and let yr trusted mechanic inspect the bike before u buy........

 

Hope the above helps.

Edited December 4, 2009 by Yongster

[Yongster]

Dont ever tell them u going to full cash...if you confirm then tell.

 

I saw one 2nd hand Black CBR 08 at Bike Production...condition very new. You can go n try. If you looking for brand new then go Loois Motor...Bike Production oso have if im not wrong.

 

I knew Loois price abit high... just dont know why i still support them.

Cos u rich wat..... So simple reason I must help u to say out...... If not, the only reason I can think of is u are secretly in love with Mr Lee..... ..... So which one?? Edited December 4, 2009 by Yongster