Woopa!! Cbr1000rr Riders

[min9min9]

check ur stator, rectifier n batt for good charge..

coz 04-05 models are bound to get their stators fried.. lolx..

its a downside of 04-05 models. =)

 

i got a cbr1k 05 model btw. =)

 

if u got go track,

maybe try taking out the HESD = honda electronic steering damper..

coz it goes by the rpm count.. the higher the rpm, the tighter the damper is..

so if u need to make any last min saving or wat during the high rpm downshifts.. the damper might lock up tight, preventing u from turning the handlebar smoothly.. but in UK, most riders dun have tis prob. =)

 

 

ohh. nice ride bro.

 

what is a stator? Where is it?

 

Ok bro. thks for ur guidance man!

[min9min9]

get better brake pump, brake line, brake pad, tires...

 

if got extra $$ get pc3, aftermarket suspension and rims.

 

if u still got alot of $$ after all this.... u shld haf gotten a ducati.

 

 

 

Ohh. Ive got pc3, yoshi exhaust alr. As well as brake lines for both front and back. But Bro, mine is duno what brand man. What brand is good? Hel ?

[ghost04]

Ohh. Ive got pc3, yoshi exhaust alr. As well as brake lines for both front and back. But Bro, mine is duno what brand man. What brand is good? Hel ?

 

get venhill....

heard now HEL is bought in bulk n cut into lengths in sg...

[craz_03]

Ohh. Ive got pc3, yoshi exhaust alr. As well as brake lines for both front and back. But Bro, mine is duno what brand man. What brand is good? Hel ?

 

there's venhill. hel, n galfer if i'm not wrong..

juz get anything u like.. =)

 

ooo...

u got pc3 n yoshi exhaust

where u got ur bike from n wat's the price??

 

get an aftermarket filter ( but if u got these 2 i believe u have an aftermarket air filter too..

den go get a dyno run..

 

if u interested to let go of ur pc3, u can contact me.. coz i finding pc3.. =))

[BlackHonda]

Morning everyone.... long time didnt come in here.

[min9min9]

get venhill....

heard now HEL is bought in bulk n cut into lengths in sg...

 

Yea yea. Mine is Venhill. I rmbr hearing this word from my mechanic. haha.

[min9min9]

there's venhill. hel, n galfer if i'm not wrong..

juz get anything u like.. =)

 

ooo...

u got pc3 n yoshi exhaust

where u got ur bike from n wat's the price??

 

get an aftermarket filter ( but if u got these 2 i believe u have an aftermarket air filter too..

den go get a dyno run..

 

if u interested to let go of ur pc3, u can contact me.. coz i finding pc3.. =))

 

 

Yea. Ive already got brake line. N i think its Venhill.

 

I bought from Global Motor. Machine 12.8k Bro.

 

Yea, my bike comes with a KNN Air filter. what dyno run bro? where can i do it?

 

i wun be letting go my pc3 bro, im sorry.

[craz_03]

Morning everyone.... long time didnt come in here.

 

morningz..

welcome to thailand.....

for girls, pls go left.

for boys, pls go right..

for ah guas, pls do a U-turn n take the next flight back.. =P

[min9min9]

check ur stator, rectifier n batt for good charge..

coz 04-05 models are bound to get their stators fried.. lolx..

its a downside of 04-05 models. =)

 

i got a cbr1k 05 model btw. =)

 

if u got go track,

maybe try taking out the HESD = honda electronic steering damper..

coz it goes by the rpm count.. the higher the rpm, the tighter the damper is..

so if u need to make any last min saving or wat during the high rpm downshifts.. the damper might lock up tight, preventing u from turning the handlebar smoothly.. but in UK, most riders dun have tis prob. =)

 

 

 

Bro craz_03,

 

Whats is a stator? Where is it located in CBR1000? How to take care of it?

[pinki06]

I thought the he might be on the budget side. Anyway this is why I use the production date and the depth of the groove to serve as a reference. Personally I been to track before and carry on using the same tyre for street riding till botak and it still hold up well. I also don't expect he to be Rossi all the way on the street. If so, he can consider changing the tyre already.

 

And I left out one point. After riding, he can feel the tyre with his hand to see if it is still smooth/slippery or not (like a wax on the tyre surface). If it is, then the compound might be spoilt.

 

At the end of the day, if he got the money, then by all mean. I personally will use these point and actual riding to gauge. To me, if it is still usable then why waste it.

 

But hey, it just my point of view. I respect your point of view as well. To each his own. Peace

 

Haha!!! marky how?? the rubber!!!

[ghost04]

hmmmm...considering a downgrade to 600...

insurance premiums keep skyrocketing...

after NCD like no diff...

currently for point a to point b abit not practical...

[MC28]

Haha!!! marky how?? the rubber!!!

 

Hi Julie~~

[craz_03]

Yea. Ive already got brake line. N i think its Venhill.

 

I bought from Global Motor. Machine 12.8k Bro.

 

Yea, my bike comes with a KNN Air filter. what dyno run bro? where can i do it?

 

i wun be letting go my pc3 bro, im sorry.

 

its ok.. =) juz asking only.. lets meet up sometime to discuss about our bikes soon

 

Bro craz_03,

 

Whats is a stator? Where is it located in CBR1000? How to take care of it?

 

its the magnetic coil... = stator..

heard from ppl tat lesser high rpm revs can sustain the life of the stator longer than usual. not sure if its true...

[min9min9]

its ok.. =) juz asking only.. lets meet up sometime to discuss about our bikes soon

 

 

 

its the magnetic coil... = stator..

heard from ppl tat lesser high rpm revs can sustain the life of the stator longer than usual. not sure if its true...

 

 

Yea. sure thing bro. Shall meet up soon with all cbr1k riders. But any ideas who is organising any trips/roundings?

 

I heard of that too. I wun revs high RPM always also. Quite xiong bike engine.

[Okada17]

hey, any one here riding a orange repsol with 2 exhaust (1 undertail / 1 side) stay around sengkang/punggol?

i saw 1 today.

 

I saw that bike before too. The guy's staying in Sengkang, Compassvale.

[Okada17]

Slider is kind of support or protection. Normally is mounted on the main frame... then front fork and swing arm oso have. But i dont think u will want to install the main frame slider cos you need to drill a hole on your side faring then able to install it.

 

My advice is go and have your frame slider installed. I know its very heart pain got to drill holes in the fairings but it beats burning a hole in your pocket if, "choy" & "touch wood", you should fall & your fairings all got banged up.... You know....

 

I had experienced it before so when i got my '08 model, 1st thing go bike shop install the frame sliders.

[craz_03]

Yea. sure thing bro. Shall meet up soon with all cbr1k riders. But any ideas who is organising any trips/roundings?

 

I heard of that too. I wun revs high RPM always also. Quite xiong bike engine.

 

cant say xiong engine.. coz its afterall a sportsbike.. n they are meant to take stress on high rpms.. =)

 

abt ur bike setup.. u can always go to HKL or racewerk for dyno runs n setting the best for ur style...

=))

costs is ard 200 if i not wrong.. =)

[Okada17]

Members of Honda CBR FireBlade in SBF.

 

Please kindly add in your name or nick in the list so that we can know how many fans of Honda Fireblade in this forum.

example. nick/name - 600/1000cc - model of the year - bike colour - Contact (Optional)

 

1. Tashi - 1000cc - RR8 - Red

2. DenverDino - 1000cc - RR8 - White

3. mx-catfish - 1000cc - RR8 - Black

4. Yongster - 1000cc - RR6 - Red

5. ghost04 - 1000cc - RR5 - Repsol

6. Kinwei - 1000cc - RR8 - Hannspree

7. RoslanSP - 1000cc - RR8 - Red

8. Daifeimao - 1000cc - RR8 - Black

9. Austin - 1000cc - RR7 - HRC

10.Jonest - 1000cc - RR4 - Fortuna - 97474257

11. Rakz - 600cc - RR8 - White

12. Rommel - 1000cc - RR5 - Repsol

13. Saufi - 1000cc - RR4 - Red/White/Blue

14. Ismail - 1000cc - RR9 - Repsol

15. Prasad - 1000cc - RR8 - White

16. BlackHonda - 1000cc - RR5 - Black

17. Shark - 600cc - RR3 - Custom Red

18. Streetrider - 1000cc - RR5 - Repsol

19. bso - 1000cc - RR6 - Red/Black

20. HOLLA - 1000cc - RR5 - Black/Orange

21. vsion - 1000cc - RR5 - Repsol

22. Dean - 1000cc - RR5 - Black/Red/White

23. rstopel - 1000cc -RR7 - Repsol

24. k4rr - 1000cc - RR8 - Custom Red

25. LanceR-Evo - 1000cc - RR8 - Hannspree

26. DemonicSaint - 1000cc - RR5 - Black

27. ritz86 - 1000cc - RR5 - Red/Blue/Grey

28. Matin - 1000cc - RR8 - Black

29. BABA 23 - 1000cc - RR4 - Spains No 1/ 96994393

30. hafiz - 1000cc - RR4 - Red

31. Leinadace - 1000cc - RR4 - Red

32. Deedee - 1000cc - RR5 - Repsol - 91890843

33. Rojryder - 1000cc - RR8 - Red

34. sHyGuY - 1000cc - RR4 - white/pepe phone.com(custom)

35. Black Poison - 1000cc - rr5 - black

36. vtecr1 - CBR900RRX - Blue

37. L0NeLYKiD - 1000cc RR6 - Red/black

38. Dosage - 1000cc RR5 - Red/Sliver/Blue

39. tom-kum-fai - 100cc RR8 - Black

40. guangson - 1000cc RR5 - Black/White

41. Okada17 - 1000cc RR8 - Candy Red/Black - 96222773

 

 

New or old members pls leave down your update on normal post and i will update it for you. Pls help me so that i can do it better for you guys. I don't wish to miss out anyone.

Hope we can see you Bladers in the coming meet up or outing. Any outing or meet up we will update here...so please feel free to take a look here more often. Cheers to all Bladers.

 

How often you guys meet up?

[DenverDino]

Haha!!! marky how?? the rubber!!!

 

U want rubber...7-11 got alot lor.

[DenverDino]

My advice is go and have your frame slider installed. I know its very heart pain got to drill holes in the fairings but it beats burning a hole in your pocket if, "choy" & "touch wood", you should fall & your fairings all got banged up.... You know....

 

I had experienced it before so when i got my '08 model, 1st thing go bike shop install the frame sliders.

 

I been condsider long time liao... i have the frame slider laying at home but still never install. Been riding this bike for 1yrs liao...touch wood still ok. Thanks for your info. Mayb wan to install liao.... but dont know when.

[DenverDino]

How often you guys meet up?

 

Long time never meet up liao...maybe you can organise one lor. That time is i always organise.... maybe you or anyone can take over this.

[DenverDino]

Anyone keen for a CBR photo shoot? This thing plan for very long time liao...this thing have to come true. How abt on 3rd Jan 2010(Sunday) morning.

[DenverDino]

CBR Photo Shoot for the YEAR.

Date: 3th Jan 2010

Venue: TBC

Time: TBC

 

Interested party pls faster add in your name.

 

1. DenverDino

2. Yongster

3.

4.

5.

6.

7.

8.

9.

 

 

Chinese, Malay, Indian or Non forum member are also WELCOME as long you own a CBR1000RR you are one of us!!!

Hope we can get more than 25 bike....if not too small group then picture take already also not nice...hehehe

Edited December 13, 2009 by DenverDino

[DenverDino]

Im thinking of Bukit Timah Turf City... anyone got objection pls let me know. Or you can suggest me a nice place.

EVERYONE PLS SPRAY THE NEWS AROUND!!!!

Edited December 13, 2009 by DenverDino

[min9min9]

cant say xiong engine.. coz its afterall a sportsbike.. n they are meant to take stress on high rpms.. =)

 

abt ur bike setup.. u can always go to HKL or racewerk for dyno runs n setting the best for ur style...

=))

costs is ard 200 if i not wrong.. =)

 

 

No la bro. What i mean is, i wun always revs high rpm. wun always anyhow whack short distances. I rather 1 short go JB or what to drag.

 

Ohh.. Okie. 200 for dyno run?

 

Ive got pc3, k&n filter, yoshi exhaust, brake lines so next i do dyno run. can ah? or need buy any more items?