Scooter Information Portal

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/RunnerRST001.jpg

 

Runner VXR RST 200 : Technical Specification

 

ENGINE

 

Type Single-cylinder Piaggio LEADER 4 stroke with catalytic

converter and secondary air system

Displacement 198 cc

Bore / Stroke 72/48.6 mm

Max power to shaft 19 bhp (14 Kw) / 9,750 rpm

Max torque 1.75 kgm (17 Nm) / 8,000 rpm

Fuel Unleaded

Valve train 4 valve S.O.H.C

Ignition Electronic capacitive discharge and variable spark advance

Cooling Liquid

Lubrication Wet sump

Start Electric (Bendix) with automatic decompression and

automatic starter

Gearbox Twist and go CVT and torque server

Clutch Dry automatic centrifugal type with damping plugs

 

VEHICLE

 

Frame Closed double cradle of steel tubes with pressed sheet metal

reinforcements

Front suspension Telehydraulic fork, ø 35 mm (85 mm travel)

Rear suspension Single-arm with oscillating crankcase; hydraulic double shock

absorber

Front brake ø 240 mm disc, floating caliper with two pistons ø 25 mm

Rear brake ø 220 mm disc, caliper with one piston ø 30 mm

Front tyre Tubeless 120/70 - 14”

Rear tyre Tubeless 140/60 - 13”

 

SIZE

 

Length 1,840 mm

Width 750 mm

Wheel base 1,340 mm

Saddle height 815 mm

Dry weight 129 kg

Fuel tank 8.7 litres (includes 1.7 litres reserve)

Max speed 120 km/h

Consumption (ECE 40 cycle) n.a.

Consumption at 60 km/h 40 km/l

Acceleration to 30m 4.2 s

Emissions Euro 2

 

 

http://i33.photobucket.com/albums/d83/cyanhan/PiaggioX8001.jpg

 

PIAGGIO X8 200: TECHNICAL SPECIFICATIONS

 

Engine: Single-cylinder, 4 stroke, 4 valve Piaggio LEADER with SAS

and catalytic exhaust

Displacement 198 cc

Bore 72 mm

Stroke 48.6 mm

Fuel Unleaded

Compression ratio 11.5:1

Power 21 hp (15.7 Kw) at 8,500 rpm

Torque 17.5 Nm at 6,500 rpm

Cooling Liquid

Gearbox Automatic CVT (continuously variable transmission) and

torque server

Start Electric with automatic start

Frame Double cradle of steel tubes

Front suspension Ø 35 mm tele-hydraulic fork with straight shafts, 90 mm

vertical travel

Rear suspension Engine works as single-arm. Two dual-effect hydraulic shock

absorbers and four-position spring preload, 90 mm vertical

travel

Front brake Stainless steel disk, Ø 260 mm, floating caliper with two

pistons, Ø 25.4 mm

Rear brake Stainless steel disk, Ø 240 mm, caliper with opposed pistons,

Ø 32 mm

Front wheel rim Die-cast aluminium alloy, 14" x 3.50

Rear wheel rim Die-cast aluminium alloy, 12" x 3.00

Front tyre Tubeless 120/70-14”

Rear tyre Tubeless 130/70-12”

Length/Width 2,050 mm/ 760 mm

Wheel base 1,490 mm

Seat height 790 mm

Dry weight 157 kg

Fuel tank capacity 12 litres (of which 1.8 litres reserve)

Max. speed 120 km/h

Consumption (ECE 40 cycle) 23 km/l

Emissions Meets Euro2 standards

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/X9250002.jpg

 

 

PIAGGIO X9 EVOLUTION 250 : TECHNICAL SPECIFICATIONS

 

Engine Single-cylinder 4-stroke 4 valve Piaggio QUASAR 250

with secondary air system, two-way catalytic

exhaust

Displacement 244.3 cc

Bore 72 mm

Stroke 60 mm

Fuel Unleaded

Compression ratio 11.5:1

Power 22 hp / 16.4 Kw at 8,250 rpm

Torque 20.2 Nm at 6,500 rpm

Fuel supply Carburettor

Distribution SOHC, 4 valve

Cooling Liquid

Gearbox Automatic CVT, torque server

Start Electric

Frame Double cradle of high-tensile steel pipes

Front suspension Telehydraulic fork, shafts Ø 35 mm, 90 mm travel

Rear suspension Two hydraulic dampers, pre-loaded coil spring adjustable to

four positions, 90 mm travel

Integral braking system Left lever actions rear and left front disks.

Right lever actions right front disk

Front brake Stainless steel double disk, dia. 240 mm, two-piston floating

calliper

Rear brake Disk, dia. 240 mm, calliper with two opposed pistons

Front tyre Tubeless 120/70 - 14"

Rear tyre Tubeless 140/60 - 14"

Length/Width 2,130 mm/910 mm

Wheel base 1,500 mm

Seat height 790 mm

Dry weight 168 kg

Fuel tank 14.5 litres (of which 2.5 reserve)

Speed 125 km/h

Consumption ECE 40 cycle: 21 km/l

Emissions Euro 2

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/Liberty200001.jpg

 

LIBERTY 200 : Technical Specifications

 

Engine Single cylinder 4 stroke Piaggio LEADER

Displacement 197.9 cc

Bore / stroke 72 mm / 48.6 mm

Compression ratio 9.5 : 1

Max. power 12.5 hp at 6,750 rpm

Max. torque 14.6 Nm at 5,000 rpm

Fuel Unleaded

Distribution (SOHC), 2 valve

Cooling Forced air

Lubrication Wet sump

Start Electric

Gears CVT and torque server

Clutch Dry automatic centrifugal type

Frame Steel tubes

Front suspension Ø 32 telehydraulic fork, 76 mm travel

Rear suspension Hydraulic monoshock, 4 position spring preload, 85.5 mm

Front brake Ø 220 mm disc, calliper with opposed pistons

Rear brake Ø 140 mm drum

Front wheel rim Die-cast aluminium alloy, 2.15x16”

Rear wheel rim Die-cast aluminium alloy, 2.75x14”

Front tyre Tubeless 100/80-16"

Rear tyre Tubeless 120/70-14”

Length 1,930 mm

Width 740 mm

Seat height 775 mm

Wheel base 1,325 mm

Dry weight 106 kg 107 kg

Top speed 90 km/h 98 km/h

Consumption (ECE 40 cycle) 28 km/l

Fuel tank capacity 9 litres

Emissions Euro 2

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/nexus001.jpg

 

GILERA NEXUS 500: TECHNICAL SPECIFICATIONS

 

Engine Single cylinder MASTER 4 stroke

Displacement 460 cc

Bore 92 mm

Stroke 69 mm

Fuel Unleaded

Compression ratio 10.5: 1

Max power to shaft 40.12 bhp (29.5 KW) at 7,500 rpm

Max torque 42 Nm at 5,750 rpm

Exhaust Closed loop system with lambda sensor and three-way

catalytic converter in exhaust pipe

Valve train 4-valve SOHC, electronic injection

Ignition Electronic inductive discharge and variable spark advance in

electronic unit with electronic immobilizer, transponder LED

and fuel pump shutoff when bike tips over

Start Electric

Lubrication Wet sump

Cooling Liquid with three-way thermostat

Gears Twist and go CVT with torque server

Clutch Dry centrifugal type with damping plugs

Frame Double cradle, high-strength steel tube trellis

Front suspension Telescopic hydraulic fork, Ø 41 mm shafts, 93 mm travel

Rear suspension Progressive POWER DRIVE, gas shock absorber with spring

preload adjustable to 7 positions; 90 mm travel

Braking system Linked: left brake lever simultaneously activates rear disk

and right front disk; right brake lever activates only left

front disk

Front brake Stainless steel double disk, Ø 260 mm, with floating Brembo

Serie Oro caliper and two pistons

Rear brake Stainless steel disk, Ø 240 mm, Brembo Serie Oro caliper

and two opposite pistons

Front wheel rim Die-cast aluminium alloy, 3.50x15”

Rear wheel rim Die-cast aluminium alloy, 4.50x14”

Front tyre Tubeless, 120/70-15”

Rear tyre Tubeless, 160/60-14”

Length 2,100 mm

Width 780 mm

Wheel base 1,515 mm

Seat height 795 mm

Dry weight 199 kg

Fuel tank 15 litres (includes 2.8 litres reserve)

Max speed 160 Km/h

Fuel consumption (ECE 40 cycle) 22 km/l

Consumption at 90 km/h 35 km /l

Emissions Meets Euro 3 standards

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/X8400001.jpg

 

X8 400 ie – Technical specifications

 

Engine Single-cylinder, 4 stroke, 4 valve MASTER with electronic

injection; catalysed

Displacement 399 cc

Bore 85.8 mm

Stroke 69 mm

Fuel Unleaded

Power 34 bhp (25 Kw) at 7,500 rpm

Torque 37.6 Nm at 5,500 rpm

Cooling Liquid

Gearbox “Twist and go” with continuously variable transmission (CVT)

and torque server

Start Electric

Frame Double cradle of steel tubes

Front suspension f 35 mm tele-hydraulic fork, 94 mm travel

Rear suspension Two dual-effect shock absorbers and four-position

spring preload, 90 mm travel

Front brake Two stainless steel disks, f 240 mm, floating caliper with two

pistons

Rear brake Stainless steel disk, f 240 mm, caliper with opposed pistons

Front wheel rim Die-cast aluminium alloy, 14" x 3.50

Rear wheel rim Die-cast aluminium alloy, 14" x 4.50

Front tyre Tubeless 120/70-14”

Rear tyre Tubeless 140/70-14”

Length/Width 2,184 mm/ 760 mm

Wheel base 1,540 mm

Seat height 790 mm

Dry weight 198 kg

Fuel tank capacity 12 litres (includes 1.8 litres reserve)

Max speed 155 km/h

Consumption (ECE 40 cycle) 18.5 km/l

Emissions Meets Euro3 standards

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/MP3red.jpg

 

PIAGGIO MP3: TECHNICAL SPECIFICATIONS 125

 

Engine Single-cylinder, 4-stroke, 4-valve Piaggio LEADER with SAS

and catalytic exhaust

Displacement 124 cc

Bore / Stroke 57 mm / 48.6 mm

Fuel Unleaded

Compression ratio 12.0:1

Max power 15 bhp (11 Kw) at 9,250 rpm

Max Torque 12 Nm at 8,500 rpm

Cooling Liquid

Gearbox ‘Twist and go’ automatic CVT, torque server

Ignition Electronic capacitive discharge (CDI) and ignition advance mapping

Starter Electric (Bendix) with automatic decompressor and automatic start

Frame Twin cradle: tubes in high tensile steel

Front suspension Parallelogram composed of four aluminium arms supporting

two steering tubes, cantilevered suspension – Travel: 85mm

Rear suspension Two dual effect hydraulic shock absorbers and adjustable

spring preload – Travel: 110mm

Front brakes Two stainless steel disks, Ø 240mm and floating calliper with

two pistons, Ø 30mm

Rear brake Stainless steel disk, Ø 240 mm and calliper with opposite

pistons, Ø 30 mm

Front wheel rims Die-cast aluminium alloy, 12" x 3.00

Rear wheel rims Die-cast aluminium alloy, 12" x 3.50

Front tyre / Rear tyre Tubeless 120/70-12” 51P / Tubeless 130/70-12” 62P

Length/Width/Wheelbase 2,130 mm / 745 mm/ 1,490 mm

Seat height/ Dry weight 780 mm/ 199 kg

Fuel tank capacity 12 litres (includes 1.8 litres reserve)

Max speed 103 km/h

Consumption (ECE 40 cycle) 25 km/l

Emissions Euro 3

 

PIAGGIO MP3: TECHNICAL SPECIFICATIONS 250

 

Engine Single-cylinder QUASAR, 4-stroke, 4-valve, electronic

injection, catalysed

Displacement 244.3 cc

Bore / Stroke 72 mm / 60 mm

Fuel Unleaded

Compression ratio 10.5 :1

Max power 22.5 bhp (16.5 Kw) at 8,250 rpm

Max Torque 21 Nm at 6,750 rpm

Cooling Liquid

Gearbox ‘Twist and go’ automatic CVT, torque server

Ignition Port Injected Alfa/n type with closed loop system, Lambda

sensor in exhaust pipe and three-way double catalytic

converter

Start Electric (freewheel) with torque limiter

Frame Twin cradle: tubes in high tensile steel

Front suspension Parallelogram composed of four aluminium arms supporting

two steering tubes, cantilevered suspension – Travel: 85mm

Rear suspension Two dual effect hydraulic shock absorbers and adjustable

spring preload – Travel: 110mm

Front brake Two stainless steel disks, Ø 240 mm and floating calliper

with two pistons, Ø 30 mm

Rear brake Stainless steel disk, Ø 240 mm and calliper with opposite

pistons, Ø 30 mm

Front wheel rim Die-cast aluminium alloy, 12" x 3.00

Rear wheel rim Die-cast aluminium alloy, 12" x 3.50

Front tyre / Rear tyre Tubeless 120/70-12” 51P / Tubeless 130/70-12” 62P

Length/Width/Wheelbase 2,130 mm / 745 mm / 1,490 mm

Seat height/ Dry weight 780 mm/ 204 kg

Fuel tank capacity 12 litres (includes 1.8 litres)

Max speed 125 km/h

Consumption (ECE 40 cycle) 23 km/l

Emissions Euro 3

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/Beverly200.jpg

 

 

PIAGGIO BEVERLY 200: TECHNICAL SPECIFICATIONS

 

Engine Single cylinder 4 stroke Piaggio LEADER

Displacement 198 cc

Bore 72 mm

Stroke 48.6 mm

Fuel Unleaded

Compression ratio 11.5:1

Power output 21 hp at 8,500 rpm

Torque 17.5 Nm at 6,500 rpm

Timing gear SOHC, 4 valve

Carburettor Walbro WVF 7

Cooling Liquid

Ignition Electronic CDI, variable spark advance

Lubrication Wet sump

Start Electric - Bendix

Gearbox Automatic CVT with torque server

Final transmission Gears

Clutch Dry automatic centrifuge type

Frame Double cradle in high resistance steel tubes

Front suspension Telescopic hydraulic fork, Ø 35 mm shafts

Rear suspension Twin dual effect hydraulic dampers, spring adjustable to 4

positions

Front brake Ø 260 mm stainless steel disk, floating calliper with two Ø 25

mm pistons

Front brake Ø 260 mm stainless steel disk, floating calliper with two Ø 25

mm pistons

Front wheel rim Die-cast light alloy - 3.00 x 16”

Rear wheel rim Die-cast light alloy - 3.50 x 16”

Front tyre Tubeless 110/70 - 16"

Rear tyre Tubeless 140/70 - 16"

Length 2,110 mm

Width 760 mm

Seat height 800 mm

Wheelbase 1,470 mm

Dry weight 149 kg

Fuel tank capacity 10 litres, of which 2.2 litres are reserve

Max. speed 121 km/h

Acceleration to 30 m 3.9 s

Acceleration to 60 m 5.7 s

Consumption at 70 kph 3 litres per 100 km

Range at 70 kph Over 300 km

Under-seat space Contains two jet helmets.

Additional storage available behind the front shield

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/VespaGTV250.jpg

 

Vespa GTV – Technical specifications

250cc (in brackets: the 125cc version)

 

Engine

Type Single-cylinder 4-stroke 4-valve with two-way catalytic

converter and SAS

Fuel Unleaded

Displacement 244cc (124cc)

Bore/Stroke 72/60 mm (57/48.6 mm)

Max power 16.2 kW / 22 bhp at 8,250 rpm

(11 kW / 15 bhp at 10,000 rpm)

Max torque 20.2 Nm at 6,500 rpm (11.5 Nm at 8,500 rpm)

Valve gear SOHC

Start Electric with automatic start

Lubrication Wet sump, chain-driven lobe pump

Cooling Liquid

Clutch Automatic centrifugal dry clutch with dampers

Gearbox ‘Twist and go’ automatic CVT (Continuously Variable

Transmission) with torque server

 

 

Load-bearing structure Pressed sheet metal frame with welded reinforcements

Front suspension Single arm, dual-chamber hydraulic shock absorber with

co-axial spring

Rear suspension Two dual-effect shock absorbers with adjustable preload

Wheel rims Die-cast aluminium alloy, 12”

Front tyre Tubeless 120/70-12”

Rear tyre Tubeless 130/70-12”

Front brake Disk ø 220 mm

Rear brake Disk ø 220 mm

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/VespaGT200.jpg

 

VESPA GRANTURISMO 200L : TECHNICAL SPECIFICATIONS

 

Engine Type Single cylinder, 4 stroke, 4 valve; with two-way catalytic

converter and secondary air system

Fuel Unleaded

Displacement 198cc

Bore x stroke 72 x 48.6 mm

Max. power 14.7 kW / 20 hp at 8,500 rpm

Max. torque 17.5 Nm at 6,500 rpm

Induction SOHC

Ignition Electronic CDI, variable spark advance

Start Electric with automatic choke

Lubrication Wet sump

Oil capacity 1 litre

Cooling Liquid

Clutch Automatic dry centrifugal type

Gearbox Automatic CVT - Constantly Variable Transmission

 

Chassis Pressed steel monocoque

Front suspension Single-arm with dual-acting hydraulic shock

absorber and co-axial spring

Rear suspension Twin dual action shock absorbers with adjustable pre-load

Wheel rims Die-cast aluminium alloy, 12”x3.00”

Front tyre Tubeless 120/70-12”

Rear tyre Tubeless 130/70-12”

Front brake ø 220 mm disk, floating calliper with two pistons

Rear brake ø 220 mm disk, calliper with two opposed pistons

Fuel tank 10 litres, of which 1.9 litres reserve

 

 

Length 1,940 mm

Width to handelbars 755 mm

Seat height 790 mm

Wheel base 1,395 mm

Dry weight 138 kg

Max. speed 119 km/h

Acceleration At 30 miles: 4.1 sec

At 60 miles: 5.9 sec

Consumption (ECE40 cycle) 25 km/litre

Consumption at 60 km/h 37 km/litre

Emissions (exhaust, noise) Euro2

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/GTS250.jpg

 

Vespa GTS 250 i.e. – Technical specifications

 

ENGINE

Type Single-cylinder QUASAR, 4 stroke, 4 valve, electronic

injection, catalysed

Displacement 244 cc

Bore / Stroke 72/60 mm

Max power 16.2 Kw (22 hp) at 8,250 rpm

Max torque 20.2 Nm at 6,500 rpm

Fuel Unleaded petrol, RON min. 95

Distribution SOHC

Injection Port Injected Alfa/N type with lambda closed loop control

and three way catalytic converter

Ignition Electronic with inductive discharge, variable spark advance

and three dimensional mapping

Cooling Liquid

Lubrication Wet sump, chain driven lobe pump, filtration during

aspiration and discharge

Start Electric

Gears CVT with torque server

Clutch Automatic centrifugal dry clutch with dampers

 

Frame Sheet metal with welded reinforcements

Front suspension Single arm, dual chamber hydraulic shock absorber with

coaxial spring

Rear suspension Two dual effect shock absorbers with adjustable preload

Front brake Ø 220 mm disc

Rear brake Ø 220 mm disc

Front tyre Tubeless 120/70-12”

Rear tyre Tubeless 130/70-12”

 

Length 1,940 mm

Width 755 mm

Wheelbase 1,395 mm

Saddle height 790 mm

Dry weight 148 kg (150 kg with ABS)

Fuel tank 9.2 litres (including 2 litres reserve)

Top speed 122 km/h

Consumption 29 km/litre (ECE + EUDC test cycle)

Consumption 39 km/litre at 60 km/h

Acceleration to 30m 4 seconds

Emissions Euro 3

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/VespaLX150.jpg

 

VESPA LX 150 : TECHNICAL SPECIFICATIONS

Engine Single cylinder 4 strokes LEADER, two-way catalytic

converter and secondary air system SAS

Bore/Stroke 62.8/48.6 mm

Displacement 151 cc

Max Power 8.6 Kw (11.7 bhp) at 7,750 rpm

Max Torque 11.6 Nm at 6,000 rpm

Induction/Distribution SOHC, 2 valve

Cooling Forced air

Starter Electric and kick starter

Clutch Dry automatic centrifugal type with damping plugs

Gearbox Twist and go CVT

Load-bearing Steel sheet metal with welded structural reinforcements

Front suspension Single-arm with coil spring and dual effect single shock

absorber

Rear suspension Coil spring with adjustable pre-load and dual effect single

shock absorber

Front wheel rim Die-cast aluminium alloy, 2.50x11”

Rear wheel rim Die-cast aluminium alloy, 3.10x10”

Front tyre Tubeless 110/70-11”

Rear tyre Tubeless 120/70-10”

Front brake Stainless steel ø 200 mm disc with hydraulic command

Rear brake ø 110 mm drum

Length/Width 1,800/740 mm

Seat height 785 mm

Wheelbase 1,280 mm

Dry weight 110 kg

Fuel tank 8.6 litres

Consumption (at 60 km/h) 37 km/l

Top speed 95 km/h

Acceleration to 30 m 4.4 sec

Emissions (exhaust, noise) Euro3

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/VespaPX150.jpg

 

VESPA PX 150: TECHNICAL SPECIFICATIONS

 

Engine Single cylinder catalysed two stroke

Bore 57 mm

Stroke 58 mm

Displacement 151 cc

Fuel Unleaded petrol

Power 8.2 bhp at 6,000 rpm

Start Electric and kick starter

Lubrication Automatic oil-fuel mixer

Cooling Forced air

Induction Rotating valve in crankcase

Gearbox Four speed, on handlebar

Frame Pressed steel monocoque

Front suspension Oscillating arm, coil spring and dual effect hydraulic shock absorber

Rear suspension Hydraulic shock absorber, 88 mm stroke

Front brake Ø 200 mm disc, calliper with two opposed pistons

Rear brake Ø 150 mm drum

Wheel rims In sheet metal, 2.10 – 10”

Tyres Tube type 3.50 - 10”

Length 1,810 mm

Width 740 mm

Wheelbase 1,260 mm

Seat height 805 mm

Dry weight 106 kg

Max. speed 91 km/h

Fuel tank 8 litres (of which 1.6 litres reserve)

Consumption 30 km/l (ECE 40 cycle)

[Brembo]

http://i33.photobucket.com/albums/d83/cyanhan/sportcity200.jpg

 

 

Model: Aprilia Sportcity 200

Year: 2005

Category: Scooter

Displacement: 198.00 ccm (12.08 cubic inches)

Engine type: Single cylinder

Stroke: 4

Power: 21.00 HP (15.3 kW)) @ 9000 RPM

Torque: 16.00 Nm (1.6 kgf-m or 11.8 ft.lbs) @ 7000 RPM

Compression: 12.5:1

Bore x stroke: 57.0 x 48.6 mm (2.2 x 1.9 inches)

Fuel system: Carburettor

Valves per cylinder: 4

Fuel control: OHC

Ignition: CDI electronic ignition with automatic advance

Starter: Electric

Lubrication system: Wet sump. Forced circulation with mechanical pump

Cooling system: Liquid

Gearbox: Automatic

Transmission type

final drive: Belt

Clutch: Automatic centrifugal dry clutch

 

Seat height: 678 mm (26.7 inches) If adjustable, lowest setting.

Overall height: 1,410 mm (55.5 inches)

Overall length: 1,865 mm (73.4 inches)

Overall width: 770 mm (30.3 inches)

Ground clearance: 250 mm (9.8 inches)

Wheelbase: 1,365 mm (53.7 inches)

 

Frame type: Double cradle in high tensile strength steel

Front suspension: 35 mm hydraulic fork.

Front suspension travel: 100 mm (3.9 inches)

Rear suspension: Engine unit acting as swinging arm. Double hydraulic shock absorber with 4 spring preload settings.

Rear suspension travel: 80 mm (3.1 inches)

Front tyre dimensions: 120/70-15

Rear tyre dimensions: 130/80-15

Front brakes: Single disc

Front brakes diameter: 260 mm (10.2 inches)

Rear brakes: Single disc

Rear brakes diameter: 220 mm (8.7 inches)

 

Fuel capacity: 9.30 litres (2.46 gallons)

Color options: Bianco Cambridge, Grigio Titanic, Nero Darkness, Silver Mirror