[Group] SBF Yamaha Spark135

[eddictive]

Words from Kevin Schwantz on importance of braking

“Even if you’re going to have to go off-line to pass somebody, you really need to have good braking reference points,” explains Schwantz in the attached video. “You also have to be really smooth in your transition off of the brakes. For me it was always one or two fingers and just the front brake, I never used the rear brake at all.”

“Muscling your way past somebody on the brakes involves just having the confidence to go up the inside of them, and also that you can make that transition smoothly onto the brakes and get all your hard braking done. Once you get to the turn you’ve got to be able to hold that line and be able to get out of the corner to keep the other guy from coming back underneath you.”

[duo]

Seriously its time for me because my odometer is telling me at speeds of 120kmh, from Boon Lay to Tampines it's only 12km. But i think i'll be getting the M'sian meter, its kinky, when you off your bike the fuel gauge shows "E", when on its "F".

And on bumpy roads the meter will go up and down like a see-saw.

[eddictive]

.....................

 

Why you remove your previous post??? I saw and lazy to comment only... Hehehe... Now you must tell me why you edit....

[Lim Ah Wan]

Why you remove your previous post??? I saw and lazy to comment only... Hehehe... Now you must tell me why you edit....

 

Hahaha The Picture Came Out For Awhile Only. After That A Picture About Copyrights Came Out.

[Man V.1]

Got even bigger holes!

 

No prob. Better try to get your rear wheel problem rectified. Its dangerous to ride like that. The problem should be inside. Get it opened up and checked.

 

Did the above and found out that my rear bearings were damaged. After 4 years of riding now then i changed my rear bearings Now my bike okay already

[DyNo]

bro's, spark 135 latest model all no bubble issit? how to fix the bubble sia?

[eddictive]

bro's, spark 135 latest model all no bubble issit? how to fix the bubble sia?

 

If I not mistaken, only limited edition came with it stock... To fix it, buy den fix....

[DyNo]

use glue arh? i c like no holes for screw lei.... or issit an attachments

[DyNo]

Can convert to clutch la. Just need to change the whole clutch basket and the clutch housing. Plus all the stuff like cable blah blah.

 

talk to shop boss just now, he say convert to clutch takes 2 days and its around 100+.. but no need pay.. he do for me..

 

can trust wan meh?

[duo]

Did the above and found out that my rear bearings were damaged. After 4 years of riding now then i changed my rear bearings Now my bike okay already

I knew the rim is alright. Glad you got it done. Where did you do it?

 

bro's, spark 135 latest model all no bubble issit? how to fix the bubble sia?

You want bubble go play with soap!

 

use glue arh? i c like no holes for screw lei.... or issit an attachments

Its a special one piece headlight coverset.

 

 

 

 

If you believe then you must be a really gullible person.

 

 

 

 

 

 

 

 

 

 

 

 

 

Ever heard of self threading screw?

 

talk to shop boss just now, he say convert to clutch takes 2 days and its around 100+.. but no need pay.. he do for me..

 

can trust wan meh?

Trust no one. My guess is the boss already include it in your bike price. When asked he will say its free. But they add some here and some there you also will not know.

[firenace]

talk to shop boss just now, he say convert to clutch takes 2 days and its around 100+.. but no need pay.. he do for me..

 

can trust wan meh?

btw, is the shop u went at alexandra? if yes, any idea if the salesman ah seng still there? maybe he can help u wif ur enquiry ba. he used to be quite helpful in SBF last time de.

[eddictive]

I would like to wish all the muslims "Selamat Hari Raya Aidilfitri" and to the non muslims, enjoy your long weekend....

Ride safe and Take care......

[FTW]

Dyno, you got your bike from Albert Motors which is located at Bukit Merah Lane? That shop is very famous/notorious, if you're with the Revenge bike group, you'll get very huge discounts when you buy a bike. If you're not, prepare to either get blended or to get a bike which will give you huge problems. To cut it short, Albert is what people avoid at Bukit Merah Lane, unless you're a regular of course.

[duo]

Dyno, you got your bike from Albert Motors which is located at Bukit Merah Lane? That shop is very famous/notorious, if you're with the Revenge bike group, you'll get very huge discounts when you buy a bike. If you're not, prepare to either get blended or to get a bike which will give you huge problems. To cut it short, Albert is what people avoid at Bukit Merah Lane, unless you're a regular of course.

Don't scare the dude. He did not know its a blacklisted shop. But get ready to be shredded into pieces. One question to him though. Will you

? Edited September 9, 2010 by duo

[FTW]

Don't scare the dude. He did not know its a blacklisted shop. But get ready to be shredded into pieces. One question to him though. Will you

?

 

Dont scare the dude? Pfft. It's just facts.

 

Dyno, buying a bike at a certain shop doesn't mean you got to service it there. Just bare that in mind.

[Man V.1]

I knew the rim is alright. Glad you got it done. Where did you do it?

 

Toh Guan Unique Motorsports

[duo]

Dont scare the dude? Pfft. It's just facts.

 

Dyno, buying a bike at a certain shop doesn't mean you got to service it there. Just bare that in mind.

Who knows? He might be a member of the said group? I have seen members of some groups which does not even own a bike let alone possessing a motorcyle licence.

 

If not. Some people just needs to learn things the hard way.

[Man V.1]

Just wanna wish all the Spark 135 riders a Selamat Hari Raya Aidilfitri and do ride safely peeps!

[rudi1986]

wah basket...when i never go unique...they got a lot of new stuff.... now tempted again....

[FTW]

Who knows? He might be a member of the said group? I have seen members of some groups which does not even own a bike let alone possessing a motorcyle licence.

 

If not. Some people just needs to learn things the hard way.

 

Member, non member, who cares, just saying my 0.02cents.

 

wah basket...when i never go unique...they got a lot of new stuff.... now tempted again....

 

May i know what's the new stuff they have?

[duo]

Just wanna wish all the Spark 135 riders a Selamat Hari Raya Aidilfitri and do ride safely peeps!

Same to you to bro.

 

Selamat Hari Raya to all spankers.

[DyNo]

I not those one of those revenged team.. But my team is under SBI which albert motors sponsor our event.. Got 1 guy there i know wan de.. Kumar he also part of SBI... But from what i c, the boss andrew is ok what.. only the mech there see people like wan to eat.. talk to andrew just now, he say the conversion included in my bike already, FBD plate mach price 3.5k (conversion included) $700 for yoshi pipe tri cone ss (paid $300 cash the rest go installment). Installment 145 x 2.5 yrs. down payment $600.. But alot of prob with the bike, gear 4 indication no light, front brake and rear brake not really that good, speedometer not working, suspension squeaking.

 

atlest better than my fren bought spark including yoshi tri oval ss. Down payment $500, $230 x 24 mnths...

[FTW]

I not those one of those revenged team.. But my team is under SBI which albert motors sponsor our event.. Got 1 guy there i know wan de.. Kumar he also part of SBI... But from what i c, the boss andrew is ok what.. only the mech there see people like wan to eat.. talk to andrew just now, he say the conversion included in my bike already, FBD plate mach price 3.5k (conversion included) $700 for yoshi pipe tri cone ss (paid $300 cash the rest go installment). Installment 145 x 2.5 yrs. down payment $600.. But alot of prob with the bike, gear 4 indication no light, front brake and rear brake not really that good, speedometer not working, suspension squeaking.

atlest better than my fren bought spark including yoshi tri oval ss. Down payment $500, $230 x 24 mnths...

 

Your "team", i see. SBI? They held an event at one of Jurong West's CC where Albert sponsored a KR as a winning prize, that was cool, even cooler if it was a 1st hand RS125. As for your pipe, i think you still need to go send it for inspection. Your bike problems are minor, as long as the engine is able to run smoothly, it's still ok. The rest you could slowly or, at your own pace do it back up.

[duo]

I not those one of those revenged team.. But my team is under SBI which albert motors sponsor our event.. Got 1 guy there i know wan de.. Kumar he also part of SBI... But from what i c, the boss andrew is ok what.. only the mech there see people like wan to eat.. talk to andrew just now, he say the conversion included in my bike already, FBD plate mach price 3.5k (conversion included) $700 for yoshi pipe tri cone ss (paid $300 cash the rest go installment). Installment 145 x 2.5 yrs. down payment $600.. But alot of prob with the bike, gear 4 indication no light, front brake and rear brake not really that good, speedometer not working, suspension squeaking.

 

atlest better than my fren bought spark including yoshi tri oval ss. Down payment $500, $230 x 24 mnths...

I kept seeing tri cone and even tri over yoshi pipe being mentioned but have yet to see it featured in Yoshimura's site. Care to enligthen me?

 

If I'm not mistaken. You sign 2.5 years and 3 years its the same thing. They will still calculate it as per annum. Might as well sign 2 or 3 years. Your friend same age and riding experience as you? Bike same plate? First or second hand? All these will play a part. Since you have already paid for the bike. Don;t think too much. Just enjoy riding it.

[slackspark]

Same wishes to you too. Oh btw i posted your OW link on my facebook to help boost the sales.

thanks! & i add u !