[Group] SBF Yamaha 125Z

[shitson_rico]

I'm not sure abt the cost of New disc brake.. But the Conebearing cost $70..

B4 u change the cone bearing, try to tighten it 1st..

Sometyme its loose datz y itz shaky..

 

oh ok.. is e bike shake wen pressing e front brake is only due to e conebearing n disc brake only?

[f.zi]

kAu nk malukan aku, malu lah...

 

kirekan kalau dpt malukan kau, kau bleh lepas utang?

[uma-man]

i oso wanted to ask e same question .. lawl ..

plus .. is it a muz for a 125z to hav a full service after get

 

it is encourage lah..coz better..so u knw how the engine,any prob of the bike and u knw when to service it again...skali u wait2 till bike spoil,then go service,confirm jialat..so better service..abt 50rm only...not ex lah.. full service should be ok..if want better..overhaul..like mango69..hahha! damn particular abt his bike:cheers:

[shitson_rico]

it is encourage lah..coz better..so u knw how the engine,any prob of the bike and u knw when to service it again...skali u wait2 till bike spoil,then go service,confirm jialat..so better service..abt 50rm only...not ex lah.. full service should be ok..if want better..overhaul..like mango69..hahha! damn particular abt his bike:cheers:

 

i tinking of goin jb for full service uh.. much cheaper .. if kana change parts also cn aford loh.. woah mango .. overhaul sia .. gua salute ..

[shitson_rico]

my fren riding 125z go overhaul his bike at amk indus kana chop $800! i bring him to my bike shop at yishun indus, e mech laugh at his face sia..

[savo]

my fren riding 125z go overhaul his bike at amk indus kana chop $800! i bring him to my bike shop at yishun indus, e mech laugh at his face sia..

 

800 bucks mcm waaaaaay too much man...

[uma-man]

my fren riding 125z go overhaul his bike at amk indus kana chop $800! i bring him to my bike shop at yishun indus, e mech laugh at his face sia..

 

y mech laugh? its that range what...tiptop overhaul is abt 1k. unless u just take out engine to change small parts then its ex lah...like mine,just to change oil seal is abt 200 -___-''

[savo]

y mech laugh? its that range what...tiptop overhaul is abt 1k. unless u just take out engine to change small parts then its ex lah...like mine,just to change oil seal is abt 200 -___-''

 

 

overhaul as in open up every single thing including engine? whooops..guess i thought open block wash carb all only.

[PeRiLoUs]

haha.. sry i using psp to log in cuz my com send for rpair .. wat i mean is it a muz for a 125z to go for full service aftr i juz get it?

 

bro mango, hw much would it cost for a brand new disc brake and conebearing?

 

its not a must tough.

 

but its ADVISABLE.

 

u never know what the previous owner had done to yr engine =)

[tasrif03]

guys...need help here,have u ever encounter a partial slight bloated rear tyre?....i mean a portion length about a normal hp length,right in the middle of the rear tyre....where there is a centre grooves line......whats wrong with that?..how can it happen?..im nt sure if its safe to ride on it...just change the tyre 4 months back...

[-tRuSt-]

Its best u do full servicing which is,

Wash/polish

Carb

Block

Top Block

Piston

Maybe Reed Valve.

 

Maybe u can look if the block is standard or not? (ported or not)

Coz if the block/carb is not ported professionaly, yeah, it wud be a problematic bike. Fc would be Horrible.

Have scratches on the block or not? Piston Still ok or not?

Its best that u go with sum1 experienced or have their own mechanic there.

Scared u kena cheated if yr a noob in 125z.

 

Hope this helps.. =D

 

Have fun with yr New LiL Monster!

 

hi,thanks for ur advice... btw, how much is it to do those things u mention at jb n which shop u intro? and also, if do in spore, how much will it be n which shop u intro?

[Sprinta03]

Sprinta03 ! ! ! , Nice Sticker u got oN Ya Bike ! ! !

 

SmLm aru uat eH?

 

 

 

 

 

JYEAH- MAX BIAGGI WINSTON DESIGN

 

DONE OVER AT 219 MOTORSHOP:thumb:

 

DROP BY THE SHOP IF U FEEL LIKE DOIN SUM DECALS ON YOUR BIKE YA!!

 

[Sprinta03]

my fren riding 125z go overhaul his bike at amk indus kana chop $800! I bring him to my bike shop at yishun indus, e mech laugh at his face sia..

 

 

overhaul got different type of overhaul lei-

 

wat was change during the overhaul must take into consideration too-

 

tat would explain y it could cost so much-

 

cheap service doesnt mean good but expensive service doesnt mean its good either-

 

so its best if u know wat needs to be change to avoid being chop and ask for the qoutation from differnt shops and compare if u dont have ur regular own mechanic tat is-

[Sprinta03]

;5662327']hi' date='thanks for ur advice... btw, how much is it to do those things u mention at jb n which shop u intro? and also, if do in spore, how much will it be n which shop u intro?[/quote']

 

 

 

 

-J.B AH GUA LANE I RECOMEND-

 

HOU HENG-

 

 

 

-PERILOUS WOULD RECOMEND-

 

KOK SENG-

 

[shitson_rico]

y mech laugh? its that range what...tiptop overhaul is abt 1k. unless u just take out engine to change small parts then its ex lah...like mine,just to change oil seal is abt 200 -___-''

 

aftr e overhaul, e prob stil dere (e bike vibration very rbk) .. worst ,e vibration gets worst aftr e overhaul .. i gez i duno much bout 125z dat tyme so i tot small bike overhaul cost abit.

[Sprinta03]

its not a must tough.

 

but its ADVISABLE.

 

u never know what the previous owner had done to yr engine =)

 

 

 

 

 

 

 

YA LIKE ME-

 

SOLD OF MY ZED WITH MY RECTIFIER SPOIL-

 

FORK LEAKING-

 

CONROD BEARING GONECASE LIAO-

 

TO WHOEVER TAT OWNER IS-

 

[uma-man]

aftr e overhaul, e prob stil dere (e bike vibration very rbk) .. worst ,e vibration gets worst aftr e overhaul .. i gez i duno much bout 125z dat tyme so i tot small bike overhaul cost abit.

 

mayb the mech fault not tighten either the engine's screw or thecoverset screw...? or they lazy put the thing between the block? like rubber2 thing i guess..

 

so u bought ur one two pie jack long ago uh?

[uma-man]

 

YA LIKE ME-

 

SOLD OF MY ZED WITH MY RECTIFIER SPOIL-

 

FORK LEAKING-

 

CONROD BEARING GONECASE LIAO-

 

TO WHOEVER TAT OWNER IS-

 

 

but worth ur accesories uh..haha

[Sprinta03]

but worth ur accesories uh..haha

 

 

DAMN WORTH LA -

 

PETRONAS PAINTWORK-

 

HEL BRAKE LINES FRONT & REAR-

 

NEW BETTERLEK 80/90-90/80

 

RCING BOY 3 SPOKE-

 

BLACK SWINGARM,ENGINE CASING,FORK SPRAYED BY SHOP-

 

OVERSIZE DISC-

 

 

 

 

 

 

N YA TO HAZLAN-

PILLION BAR GOT TAILLIGHT BUT WIRE CUT OFF-

[shitson_rico]

mayb the mech fault not tighten either the engine's screw or thecoverset screw...? or they lazy put the thing between the block? like rubber2 thing i guess..

 

so u bought ur one two pie jack long ago uh?

 

no uh.. oni 3 days ago uh .. stil wanting to get use to nt having a tank to grab on .. lawl ..

[XanChi]

kirekan kalau dpt malukan kau, kau bleh lepas utang?

 

HUTANG $$$ boleh dibayar, HUTANG budi dibawa mati.

[MaNgO 69]

oh ok.. is e bike shake wen pressing e front brake is only due to e conebearing n disc brake only?

 

From my Prediction, Yes.. Itz either one of them..

u can test whether ur rim bengkok or not by riding at constant speed and let go out of ur hand from the handle bar..

If it shake left right very fast, then it could be ur rim..

 

 

it is encourage lah..coz better..so u knw how the engine,any prob of the bike and u knw when to service it again...skali u wait2 till bike spoil,then go service,confirm jialat..so better service..abt 50rm only...not ex lah.. full service should be ok..if want better..overhaul..like mango69..hahha! damn particular abt his bike:cheers:

 

SAYANG MOTOR LAH SEY ! ! !

HaHa..

 

i tinking of goin jb for full service uh.. much cheaper .. if kana change parts also cn aford loh.. woah mango .. overhaul sia .. gua salute ..

 

Bro, if can ask anyone that are regular to the JB workshops to accompany u to the shop that they recommend..

Itz to prevent from kena Con..

 

 

guys...need help here,have u ever encounter a partial slight bloated rear tyre?....i mean a portion length about a normal hp length,right in the middle of the rear tyre....where there is a centre grooves line......whats wrong with that?..how can it happen?..im nt sure if its safe to ride on it...just change the tyre 4 months back...

 

ADA CACING tu pt dLm ! ! !

 

JYEAH- MAX BIAGGI WINSTON DESIGN

 

DONE OVER AT 219 MOTORSHOP:thumb:

 

DROP BY THE SHOP IF U FEEL LIKE DOIN SUM DECALS ON YOUR BIKE YA!!

 

 

ProMoTe kedai 219 NamPak ? HaHa . . .

Btw NiCe DESIGN BrO ! ! !

 

 

-J.B AH GUA LANE I RECOMEND-

 

HOU HENG-

 

 

 

-PERILOUS WOULD RECOMEND-

 

KOK SENG-

 

 

-Mango 69 would recomend_

 

EXTREME ! ! !

But at S'pore lah.. HaHa..

[MaNgO 69]

no uh.. oni 3 days ago uh .. stil wanting to get use to nt having a tank to grab on .. lawl ..

 

Alternatively, u can fix a Basket.. Also can grab..

[apiZ125Z]

Anyway , thanks eh mango tadi drop by to check on motor aku and giving me advice . Lega hati sikit

[XanChi]

You can also try Mitra Workshop @ Eunos Ave 3(Behind SingPost)

 

Search for Din.