-=BabyBlade=-(CBR)

[il4]

Originally posted by Zer0@Dec 8 2005, 11:51 AM

Different manufacturer, the actual jets are the same thing just different brand.

Dynojet Needles are known to be detrimental to the carb's emulsion tube, it causes uneven wearing that results in certain needle position (usually below 3/4 Throttle Position) to be excessively Rich. Do you reckon Factory Jet will be the same as DJ needles?

[honam24]

Originally posted by il4@Dec 8 2005, 10:40 AM

Dynojet Needles are known to be detrimental to the carb's emulsion tube, it causes uneven wearing that results in certain needle position (usually below 3/4 Throttle Position) to be excessively Rich. Do you reckon Factory Jet will be the same as DJ needles?

so which one is more recommanded?

[Zer0]

Originally posted by il4@Dec 8 2005, 10:40 AM

Dynojet Needles are known to be detrimental to the carb's emulsion tube, it causes uneven wearing that results in certain needle position (usually below 3/4 Throttle Position) to be excessively Rich. Do you reckon Factory Jet will be the same as DJ needles?

You can buy different sizes from Dynojet, Factory or even just from Honda. Just ask for the sizes that you want.

 

They all work the same. If installed and setup correctly parts from Dynojet, Factory or Honda will all wear the same.

 

It's generally cheaper to just order the different size parts from Honda as you are not paying for the brand name then like you are with the other manufacturers.

 

I use Dynojet but that is because I got a full race kit with many different sizes for free with one of my bikes.

[LinW]

Originally posted by wantonmee07@Dec 8 2005, 02:20 AM

how much it bought the heel plates for??

i mean the metal one

 

 

thanks...

i got the metal ones at LAB..they were meant for cbr900, so they're perforated holes...cost $34 for a set...

[Zer0]

Sorry no idea about specific part numbers off the top of my head.

 

Hurricane headers are still restricted. In the collector portion of the headers and in the end can.

 

I am fairly sure that the diameter of the carbs didn't change between model years. I have RRR model carbs on my 89 model hurricane at home and they go on just fine. Although I may be wrong as I have not seen in person and compared the carbs on each model.

[alpha82]

omg.. zero and il4... and the rest of u guys like pros...

 

which mech u guys go to? i need help in troubleshooting my bike man~ =(

 

or... how about an outing next fri 16th? ha~ wantonmee? =p

[piggy83sg]

anyone letting go cbr600rr? pls sms me at 93801247. thanks.

[DM]

wah.. il4 u riding a cbr too? which model ?

[Zg-]

Originally posted by LinW@Dec 7 2005, 09:57 PM

Dudes!

 

I have a set of plastic heelplates lying arnd tt i wanna get rid of...coz i decided the metal ones look nicer n bought frm LAB...

anyone wants them? they dun look too used...just gimme some kopi $$ can liao,

 

oh yah...tt day at 2nd link, i helped one of the cbr riders pick up his glove at the sg customs...is tt dude one of u guys too?

haha! origianl paintwork? Alpine* gloves? its me thanks for that day next time can join us if u r free

[Zg-]

Originally posted by il4@Dec 8 2005, 03:26 PM

The cheapest option:

 

Get a free flow exhaust and yet still legal, so its either one from NC23 or a NC29L exhaust header and end can.

 

I have a vague recollection that the Carb manifold on the NC29L is bigger in internal diameter then N and RR. Hence you probably need to go to get a fresh set of manifold (NC29L).

 

I choose to shim the stock needles since they are not adjustable. 0.5mm shim is a good start.

 

And probably if ya riding a RR, probably need to get those mainjets to match the above changes. #108 perhaps....

 

Then again these aint buy and fit upgrades, you need spend countless of agonising hours trying to find the optimum set up. Believe me its not easy.

how are you doing? long time no see

[Liquid tension exp]

I NEED UR HELP GUYS>>> im going to buy a cbr fairblade L model... wad should i check in the bike before i buy.. pls guide me... its an old bike i don wanna to get a problem bike.. i have experice b4... i don wanna go through the same hard time.. pls guide me.. i would really be grateful to ull... PLS PM ME CAN thanks..

[Liquid tension exp]

I NEED UR HELP GUYS>>> im going to buy a cbr fairblade L model... wad should i check in the bike before i buy.. pls guide me... its an old bike i don wanna to get a problem bike.. i have experice b4... i don wanna go through the same hard time.. pls guide me.. i would really be grateful to ull... PLS PM ME CAN thanks..

[560FiveSixty]

Originally posted by Zer0@Dec 8 2005, 09:55 AM

Yeh not in Singapore. Here have to go to the shop and haggle over price etc. In Australia can just order over the net with a couple of clicks and have delivered to your door for very cheap prices. That is the difference I mean.

 

Anyway I know this guy he has garages full of CBRs and CBR parts so if anyone is searching for parts, eg replacement radiator, forks, wheels, discs anything really just send him a message and ask if he has what you want and how much.

 

He looks after my CBR400 ever since I got it.

 

Anyway if you are not happy to deal with someone that when then that is fine, was just trying to say that I know him and he has heaps of parts and very ok prices.

i think i need a radiator...

 

1st hand or issit 2nd hand?

[wantonmee07]

Originally posted by LinW@Dec 8 2005, 06:14 PM

i got the metal ones at LAB..they were meant for cbr900, so they're perforated holes...cost $34 for a set...

ok thanks...

 

jus wanna know how much the market is selling.

 

[wantonmee07]

Originally posted by alpha82@Dec 8 2005, 06:26 PM

omg.. zero and il4... and the rest of u guys like pros...

 

which mech u guys go to? i need help in troubleshooting my bike man~ =(

 

or... how about an outing next fri 16th? ha~ wantonmee? =p

i don feel like planning again leh...

 

Some more Zero hasnt got his bike ready. N previously i've post one suggestion bout going zero place as he had suggested it b4. But the post seems dead.

 

Wat kinda troubleshooting u having? Maybe can type in here n ask ard.

 

So, anyone wanna meet out on 16th?

[TooToo7]

Original K & N Air Filter for CBR400 Fireblade to let go.

 

Price S$70.

 

Condition: Used, all fins in good condition. Never serviced with air compressor before, only air dried.

 

PM to deal.

[Qiang]

Anyone letting go their original signal light?

[Beavis08]

Originally posted by honam24@Dec 7 2005, 07:03 PM

huh not in singapore...

 

 

 

Anywae nothin to be fussy about.. if u think i wrong to ask him to post the items which he wanted to sell.. then i apologise for my behaviour...

 

anywae it between me and him... Mm.. if u wan something from him , maybe u can use ur way of doin... as for me.. sorri it not the usual way i settle my stuff.

 

thank for ur concern...

 

chill guys, its oni a small matter, dun fight over such a small matter ok? the is not the way we CBRians settle thing. juz chill ok............

[Beavis08]

Originally posted by LinW@Dec 7 2005, 09:57 PM

Dudes!

 

I have a set of plastic heelplates lying arnd tt i wanna get rid of...coz i decided the metal ones look nicer n bought frm LAB...

anyone wants them? they dun look too used...just gimme some kopi $$ can liao,

 

oh yah...tt day at 2nd link, i helped one of the cbr riders pick up his glove at the sg customs...is tt dude one of u guys too?

wat paint work is tat??

[Beavis08]

Originally posted by enfant@Dec 7 2005, 10:26 PM

thanks your blackbird looks really sexy too. hey thanks for clocking our speeds, i understand that you have commitments therefore you are not entitled to brash and stupid behaviour like the 3 of us lol anyways, the food was kinda average. still a fun trip overall

go where bo jio??

[Beavis08]

Originally posted by Zg-@Dec 8 2005, 07:46 PM

haha! origianl paintwork? Alpine* gloves? its me thanks for that day next time can join us if u r free

go where and play bo jio?? track???

[Beavis08]

Originally posted by wantonmee07@Dec 8 2005, 10:37 PM

ok thanks...

 

jus wanna know how much the market is selling.

 

yoz, so hows the foot plate going??

[Beavis08]

Originally posted by wantonmee07@Dec 8 2005, 10:38 PM

i don feel like planning again leh...

 

Some more Zero hasnt got his bike ready. N previously i've post one suggestion bout going zero place as he had suggested it b4. But the post seems dead.

 

Wat kinda troubleshooting u having? Maybe can type in here n ask ard.

 

So, anyone wanna meet out on 16th?

bro dun worry I support u, u r the best organiser ard for the moment, the club is growing liao so u cannot stop organising ok? :cheer:

[wantonmee07]

Originally posted by Beavis08@Dec 9 2005, 12:33 AM

yoz, so hows the foot plate going??

haven started... finish drawing liao...

but need the fireblade wording design

the cbr one also leh. u got? heheee

[wantonmee07]

Originally posted by Beavis08@Dec 9 2005, 12:34 AM

bro dun worry I support u, u r the best organiser ard for the moment, the club is growing liao so u cannot stop organising ok? :cheer:

ok lo... then set it on the 16th lo... alpha u must come hor... u suggest on 16th one hor... hehee