regarding race fairing

[helpmeplz]

hi bros.

i've got a set of racing fairing for my cbr600.

condition is quite so-so, with cracks and chips.

It was passed down by previous owner.

I was keen to track, and would like to know where is the best place to get my race fairing fixed up and sprayed?

and how much money do i have to put aside.

 

Thanks, and appreciated.

[ghost04]

i think no need to waste $$ spraying..

patch up the bits and pieces should do...

its a race fairings afterall...it will nvr replace ur oem fairings.

[prasad]

u can see it 2 any spray shop the repairs can be done there

[helpmeplz]

ya i think i really need a repair as most of the bolt holes are crack and need to admend.

 

any reputable shop to intro?

 

and issit cheaper then doing oem fairing?

[prasad]

its cheaper just ask ur bike shop it should cost less than 500 for a decent paint job

[Wen gege]

yes. u dun have to spend so much on spraying as u already said e fairing is only so so condition. jz go to hard ware shop to get a putty n cover up the crack and spray e fairing urself.

putty cost $5

Fibre putty cost $25

spray $5 each x2 bottles or x3 bottles.

total cost is below $50

[helpmeplz]

yes. u dun have to spend so much on spraying as u already said e fairing is only so so condition. jz go to hard ware shop to get a putty n cover up the crack and spray e fairing urself.

putty cost $5

Fibre putty cost $25

spray $5 each x2 bottles or x3 bottles.

total cost is below $50

 

hi bro, may i know where to get the fibre putty u r toking about?

and wad is the difference with putty?

the specific brand?

after all ur advise, i've decided to diy myself =)

[helpmeplz]

yes. u dun have to spend so much on spraying as u already said e fairing is only so so condition. jz go to hard ware shop to get a putty n cover up the crack and spray e fairing urself.

putty cost $5

Fibre putty cost $25

spray $5 each x2 bottles or x3 bottles.

total cost is below $50

 

hi bro, may i know where to get the putty u r toking about?

the specific brand?

after all ur advise, i've decided to diy myself =)

[helpmeplz]

anyone to help me locate the fibre putty?

[Specs]

just wondering, when you guys put on race fairings, how do you guys get the bike to PG? Do you guys get someone to tow it for you?

[Wen gege]

hi bro, may i know where to get the putty u r toking about?

the specific brand?

after all ur advise, i've decided to diy myself =)

 

hi, i get it at hardware shop near my area. located at AMK industrial park(duno park A /B) there is a caltex nearby. jz tell them u r lookin for a putty for car. cost $4-5.ya

[dEeLdo]

just wondering, when you guys put on race fairings, how do you guys get the bike to PG? Do you guys get someone to tow it for you?

 

some load it up in vans and trucks, some just add external lamp or mould it and jus ride up to PG... i ride up... some say TP wont stop u if dey see u in racing suit, at least you have a headlight. duno its tru or nt, it all come down to luck i guess