Varadero 125

DaNiYaL · July 9, 2005

Originally posted by DaNiYaL@Jun 30 2005, 01:55 PM
Whats Up DaWgZ!!

3 Nations Ride
Venue : Penang
Date : 17 - 19 September 2005
Fees : $150
Closing Date : 02 July 2005

$150 inclusive of

1. Polo T-shirt
2. Charity Event T-shirt
3. Event Sticker
4. Event booklet
5. breakfast n dinner party
6. 2 night stay at Equatorial Hotel

We will be riding together with the LA Boyz...

Move out : 16 September 2005
Time : 2300hrs

Riders List

1.
2.
3.
4.
5.

Interested parties...plz do get back to me by this Sunday, 03 July 2005...

anyway...Stock Air filter including labour...$150....anybody want to change air filter?

Whats Up DaWgZ!!

prodero>>> I organize for OUTRIDERS...those interested are welcome to join us....i would say majority of our riders are Vara125....but there are ST11 riders, Harley Davidsons riders, wave riders, Super 4s riders and even an R6 rider is joining us...I believe we have a good mix already...even some big bikers group are impressed with us....They even share with me their pointers....I believe whatever we do...we have to stay humble....Anyway, from the begining...OUTRIDERS have this mindset...DIVERSITY....it is not about the bikes...it is about the riders...

Anyway..about your 3 nations ride...i already post last week....juz for your info....LA Boyz push the dead line earlier...this is for adminstration purposes...the main event will be at equatorial hotel....if i am not wrong...so they are trying to make the booking asap...coz we will be fighting with other 1500 riders from the 3 nations...got to make it fast!....

RYKIEL · July 9, 2005

Good day Riders,

Got to know a factory that fabricate laminates for car interior panels. Same as those woodgrains designs found on door panels and dashboard of cars.

Last week I sent my bike to the factory to laminate most of the bike's plastic molding including one metal cover for the exhaust.

Today, went to the factory to check on my bike and took some photos to share with you guys....

Hopefully, all parts should be installed by Wednesday.

I was fortunate to be given a giuded tour and how they would laminate the moulds.

Wow! It's not easy.... lot's of steps taken...... quite a complex operation!

Anyway, pls go to my photo gallary to view the pics.

Will post more after installation.

Rgds,

RYKIEL

raden · July 9, 2005

Originally posted by Varadero_1984@Apr 28 2004, 07:34 PM
top speed around 120km/h..den performance wise alright lah..cos not a sportsbike..dun expect much from it..

how much u bought for the new varedero 125???? i am riding drw now....

last time i drive rxz for more than 10yrs....such a solid bikelah bro.....

Beb · July 9, 2005

raden>>Bro Varadero_1984 already sold his bike long time ago...Maybe u can asked Iswandy how much his bike cost(Recently purchased at Loois Motor)...

SHAHRUL · July 10, 2005

Bros i'm thinkin of getting a undercrowl.....Mr abbotary, how much if fabricate...

dakar · July 10, 2005

Rykiel...Wow!! bro...thats really something ya...Good work there..

visual · July 10, 2005

Originally posted by dakar@Jul 10 2005, 09:46 AM
Rykiel...Wow!! bro...thats really something ya...Good work there..

Rykiel, wow.,.. im wondering.. how much does the whole process cost?

i like engine block plastic, and the plastic just below the speedometer... looks damm good..

since your bike is all black.. wow! got to see your bike ..soon.. man

Aikon · July 10, 2005

Hi..all Vara bros,Peace...

Originally posted by Flame of Recca@Jul 8 2005, 12:26 AM
brothers, hehe i know i'm like a step late.....but anyone free can help me fix a hazard light?

------

Dear Brothers >>

After two wrongly tapped wires later (due to color mismatch),am now confident enough to 'help' fix hazard light for those interested. But wait, there's a catch (its two actually).

Firstly, help me to help you in getting this items yourself or can get a coordinator to do mass purchasing. Here’s an estimated cost breakdown.

Items Price $:

1. Condenser/ Hazard light flasher ~$3 - $4

2.. In-line fuse holder ~$1.50 - $2

3. 10 Amp fuse ~$0.50 / piece

4. Toggle switch ~ $2 -$2.50

5. Spade Connector (2pcs) ~$0.20/pc

6. Used negative film (black)container ~1pc

Secondly, am dedicating this project to the Outriders fund. On successful completion, if you wish (voluntarily),a small token will be much appreciated which will go into purchasing of group's essential items (i.e communication set)

FYI, there's another in the pipeline with similar objective but only after this project is completed. Btw, need a volunteer as coordinator for both projects.

To kick start and officiate this good cause, the 'great' (pronounced gerek) leader, Abattory, shall have the honour first. So, if all agreeable on the ‘terms’, do show your support and at the same time, learn something new, the DIY way.

----(copy and paste)-------

THE OUTRIDERS – Hazard light cum Fund Raising Project

(Details with regards to the date, time and place of installation will be announced later. Need to survey the respond first. Note: Open to Vara125 only simply because am quite familiar with it)

Facilitator:

1. Aikon

Coordinator:

1. ?

Interested

1. Abattory

2.

3.

4.

5.

RIDE SAFELY

Adios amigo

Niti · July 10, 2005

THE OUTRIDERS – Hazard light cum Fund Raising Project

(Details with regards to the date, time and place of installation will be announced later. Need to survey the respond first. Note: Open to Vara125 only simply because am quite familiar with it)

Facilitator:

1. Aikon

Coordinator:

1. ?

Interested

1. Abattory

2. Niti

3.

4.

5.

RYKIEL · July 10, 2005

Originally posted by visual@Jul 10 2005, 10:05 AM
Rykiel, wow.,.. im wondering.. how much does the whole process cost?
i like engine block plastic, and the plastic just below the speedometer... looks damm good..
since your bike is all black.. wow! got to see your bike ..soon.. man

Hi Visual / Dakar,

Thanks ! Have not foot the bill yet. Hopefully, will not be to expensive.

How much would you pay for :

a) Warranty 5 yrs against peeling.

b) High heat resistant. (Also used for Car Engine Block)

c) Color design will not fade.

d) 2K high gloss finished.

e) Custom design.

f) Dismantle and installation.

g) Approx. 1.5 weeks job.

Your comments would be helpful......cos I can propose to factory for MO if anyone is keen in doing any parts!

Rgds,

RYKIEL

private_asylum · July 10, 2005

THE OUTRIDERS – Hazard light cum Fund Raising Project

(Details with regards to the date, time and place of installation will be announced later. Need to survey the respond first. Note: Open to Vara125 only simply because am quite familiar with it)

Facilitator:

1. Aikon

Coordinator:

1. ?

Interested

1. Abattory

2. Niti

3. Newtsuit

4.

5.

unknown · July 10, 2005

Just to share the joy for Visual's wedding with you guys.

Err....dun think i am a good photographer, so just bear with me guys.

Note: Before u guys wonder abt the car registration number, I removed all registration number for privacy sake.

unknown · July 10, 2005

The riders.

PS: dun tell ppl i sala turn hor......

think i must enroll myself in old folks home soon.

unknown · July 10, 2005

And lastly, a finale pic.

Niti · July 10, 2005

Unknown Ok wat ur photos Aniwae today i cant bring my digi cam coz my bro borrowed it to his fren.

Dakar Ambik gambar w pengantin pun sembayang ke...

SHAHRUL · July 10, 2005

THE OUTRIDERS – Hazard light cum Fund Raising Project

(Details with regards to the date, time and place of installation will be announced later. Need to survey the respond first. Note: Open to Vara125 only simply because am quite familiar with it)

Facilitator:

1. Aikon

Coordinator:

1. ?

Interested

1. Abattory

2. Niti

3. F.O.R

4.

5.

SHAHRUL · July 10, 2005

Unknown>>>>bro ur pic ok what......btw y in the bride n groom pic dakar n my eyes close sia.....the moment the pic pop up only i laugh like mad.....is dakar saying a little prayers for visual???

Azliano · July 10, 2005

Nize one there...haha...

VaraStormer · July 10, 2005

Originally posted by RYKIEL@Jul 9 2005, 10:29 PM
Good day Riders,

Got to know a factory that fabricate laminates for car interior panels. Same as those woodgrains designs found on door panels and dashboard of cars.

Last week I sent my bike to the factory to laminate most of the bike's plastic molding including one metal cover for the exhaust.

Today, went to the factory to check on my bike and took some photos to share with you guys....

Hopefully, all parts should be installed by Wednesday.

I was fortunate to be given a giuded tour and how they would laminate the moulds.

Wow! It's not easy.... lot's of steps taken...... quite a complex operation!

Anyway, pls go to my photo gallary to view the pics.

Will post more after installation.

Rgds,
RYKIEL

Brother, care to share how much did they roughly quoted you for those parts? You mean they fabricate all the parts and do it 2k paint? Saw your gallery, power lah brother. Care to share where is the factory? Interested in getting the bike done up too. Btw those parts shown are they fabricated one? And how they fabricate those parts. Hope to get your reply soon...

Al-Simmons · July 10, 2005

THE OUTRIDERS – Hazard light cum Fund Raising Project

(Details with regards to the date, time and place of installation will be announced later. Need to survey the respond first. Note: Open to Vara125 only simply because am quite familiar with it)

Facilitator:

1. Aikon

Coordinator:

1. Al-Simmons

Interested

1. Abattory

2. Niti

3. F.O.R

4.

5.

Al-Simmons · July 10, 2005

Originally posted by unknown@Jul 10 2005, 04:29 PM
The riders.

PS: dun tell ppl i sala turn hor......
think i must enroll myself in old folks home soon.

my bike become centre of attraction already...

anyway...the rest of the photos i email to [email protected]

my camera not that good so on the move the pix not that nice...

Niti >>> where's all the video??? from Cherating Trip

pingster · July 10, 2005

Originally posted by RYKIEL@Jul 10 2005, 10:46 AM
Hi Visual / Dakar,

Thanks ! Have not foot the bill yet. Hopefully, will not be to expensive.

How much would you pay for :

a) Warranty 5 yrs against peeling.

b) High heat resistant. (Also used for Car Engine Block)

c) Color design will not fade.

d) 2K high gloss finished.

e) Custom design.

f) Dismantle and installation.

g) Approx. 1.5 weeks job.

Your comments would be helpful......cos I can propose to factory for MO if anyone is keen in doing any parts!

Rgds,
RYKIEL

can let us know the price when u got ur bill??

DaNiYaL · July 11, 2005

Whats Up DaWgZ!!

visual>>> Congratulationz!...May you have a blissful marriage!...Yeah!..Amin...

Brothers...you guyz rock!...the pictures are very good...but too many eyes are close...ehehehhehehe....Anyway..nice werk there!....how come...no safety vest...ahahhahahah....Hope you guyz had fun!....

Other than that...keep it coming brothers!...

Al-Simmons · July 11, 2005

Next time we try to get a photo like this k...

http://baldy.smugmug.com/photos/4965-M-1.jpg

Aikon · July 11, 2005

Hi..all Vara bros,Peace..

THE OUTRIDERS – Hazard light cum Fund Raising Project

Facilitator:

1. Aikon

Coordinator:

1. Al-Simmons

Interested

1. Abattory

2. Niti

3. Newtsuit

4. F.O.R

--------

Al-simmons >>bro, thanks for volunteering.this saturday are you free?

Interested parties >> wants to purchase the items by this saturday 16th July 2005.so on you part, would appreciate it if you can liase with the coordinator regarding the $$$. Hope to complete this project by end month sun 31st July.

btw,any bros can recommend a good place to do this project ? thanks.

RIDE SAFELY

Adios amigo

Sign In

Join SingaporeBikes.com today! Where Singapore Bikers Unite!

Varadero 125

Recommended Posts

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Join the conversation

Latest Topics