SBF MaxSym Cafe

[rusty83]

Nt experience with FI system but there is alot of potential culprits for this issue. Cux usually FI can start very easily. I tink d easiest one is ur fuel possibly is dirty/got moisture. Try run some fuel system cleaner for a few tanks and then see how. If still persist can send shop check ur bike.

 

I usually start my bike once in 2 weeks, longest layoff was 7 weeks. Bike always starts fine.

 

Are you using below 95 octane? Previously on my X9, left bike with full tank of petrol untouched for 3 months, first attempts to start was futile. Starter was cranking well, but bike just could not maintain idle. Suspect fuel degeneration. Went petrol station bought the cheapest Octane booster, pour in quarter of a bottle and bike came alive.

 

i always pump esso 5000, which is the red gun...usually wont have problem..maybe i try pumping 8000 and try using the booster from the petrol kiosk...see if the problem is still there..hopefully not the fuel injector problem..

[naim]

i always pump esso 5000, which is the red gun...usually wont have problem..maybe i try pumping 8000 and try using the booster from the petrol kiosk...see if the problem is still there..hopefully not the fuel injector problem..

 

Or u can pump better petrol like vpower or caltex platinum just to clean it up abit more. Hope its nothing expensive.

[Leftlegged]

if somebody want this nice accessory for Maxsym 400i, let me know i can send it.

 

Colors: Blue,Red,Silver and Black. Made from Aluminium and BodySlider.

 

[ATTACH=CONFIG]256457[/ATTACH]

 

hey bro, how heavy is it? and of course, the more important question is, how much?

[Leftlegged]

Stock it is in d lower height. U can raise it up abit. Remove d black plastic shield below the windscreen. 2 screws from underneath. Then slide it down. Then expose the windscreen mounting bolts (x6). Remove then relocate the windscreen higher by aligning to the new mounting holes then replace everyting back.

 

To me not alot of difference. Im 178 but i still expreience a lot of buffeting at d helmet and shoulders. Nt sure if the givi windscreen is here alr. Can check wif Mah?

 

Checked, and got a quote from them...waiting time is about 2 months. Im ordering one.

[naim]

Checked, and got a quote from them...waiting time is about 2 months. Im ordering one.

 

may i know how much is it?

[MERCENARY]

Checked, and got a quote from them...waiting time is about 2 months. Im ordering one.

 

Yeah any pics?I am interested too

[rusty83]

there are so many models, but didnt see any for Maxsym 400

 

http://www.givi.it/Screens--spoilers/AIRFLOW/

[MERCENARY]

there are so many models, but didnt see any for Maxsym 400

 

http://www.givi.it/Screens--spoilers/AIRFLOW/

 

In that case, how do you know which model to order?

[Leftlegged]

there are so many models, but didnt see any for Maxsym 400

 

http://www.givi.it/Screens--spoilers/AIRFLOW/

 

here you go...look for model 7051DT.

 

http://www.givi.it/My-motorcycle/?ma=SYM&mo=Maxsym-400-11

[MERCENARY]

here you go...look for model 7051DT.

 

http://www.givi.it/My-motorcycle/?ma=SYM&mo=Maxsym-400-11

 

How much did Mah quoted you for it?

[Little potato]

Do u guys know where can I purchase the spare key for MaxSym?

[naim]

Do u guys know where can I purchase the spare key for MaxSym?

 

original blank key u can get from Mah and then go keyshop and cut. cheaper alternative is go to the keyshop beside Regina. nt original, but works okay. abit rough but for spare only mah. no issue.

[MERCENARY]

original blank key u can get from Mah and then go keyshop and cut. cheaper alternative is go to the keyshop beside Regina. nt original, but works okay. abit rough but for spare only mah. no issue.

 

I went to the same place keyshop beside Regina to get my done. For sharing purposes, it's more expensive to buy from Mah which includes GST.

Best part the last i checked no ex-stock. Got to wait rough estimation 2 weeks.

[DeZewL]

I went to the same place keyshop beside Regina to get my done. For sharing purposes, it's more expensive to buy from Mah which includes GST.

Best part the last i checked no ex-stock. Got to wait rough estimation 2 weeks.

 

does the keyshop beside regina make the security lock key too?

[naim]

does the keyshop beside regina make the security lock key too?

 

Yup. But its 2 separate items not like our original key all-in-one kind. Price wise i forgot alr. Can refer to d earlier posts.

[rusty83]

here you go

http://www.singaporebikes.com/forums/showthread.php/330997-SBF-MaxSym-Cafe?p=7538203&viewfull=1#post7538203

[rusty83]

Anyone bought bike cover to cover your maxsym?

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

[2992]

Anyone bought bike cover to cover your maxsym?

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

 

Definitely must cover. Got mine before Maxsym arrive last october, till now still going strong. Some Jap brand, thick, hi temp resistant inner layer with 'spandex' at the bottom. No need to use bungee to tie down.

 

Price at about $40 at Regina, I got it way cheaper as I also bought my Carberg, from the plump salesguy.

[2992]

Where to get exhaust clamp? Rust free type.

[rusty83]

Definitely must cover. Got mine before Maxsym arrive last october, till now still going strong. Some Jap brand, thick, hi temp resistant inner layer with 'spandex' at the bottom. No need to use bungee to tie down.

 

Price at about $40 at Regina, I got it way cheaper as I also bought my Carberg, from the plump salesguy.

 

I just went to buy a $20 cover from LAB. Was thinking of buying the oxford 1 from motorworld but my friend said better don't buy too good 1 incase stolen by lowlife muthafarkers won't heart pain..

 

Also went to the key shop to have my key duplicated for $20. It's a 2 piece key. Quite chui..lol..but serves its purpose as a spare key la..definitely not for everyday use..

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

[naim]

Where to get exhaust clamp? Rust free type.

 

Try get urs powdercoated? Will be more lasting than normal paint.

 

Also went to the key shop to have my key duplicated for $20. It's a 2 piece key. Quite chui..lol..but serves its purpose as a spare key la..definitely not for everyday use..

 

Ugly right the key? But like i said its for emergency purposes only. Maybe use 1 or 2 times in the bike's lifetime

[rusty83]

Try get urs powdercoated? Will be more lasting than normal paint.

 

 

 

Ugly right the key? But like i said its for emergency purposes only. Maybe use 1 or 2 times in the bike's lifetime

 

ya..haha..the key itself is normal, the unlocking device is the "head" cut off from another spare key, worst still the magnet on the unlocking device looks like its gonna detach..i pasted scotch tape over incase accidentally lose the magnet.

 

but ya, im alright with this cause its a spare key just in case might not even get to use it

[2992]

Don't think I will, rust had pimpled the surface, so must sand it down big time again. Anyway, saw from online store there are universal stainless steel type, just find the right diameter. Add a little bling at the same time.

[MERCENARY]

Anyone bought bike cover to cover your maxsym?

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

 

Yes i did.

[MERCENARY]

I just went to buy a $20 cover from LAB. Was thinking of buying the oxford 1 from motorworld but my friend said better don't buy too good 1 incase stolen by lowlife muthafarkers won't heart pain..

 

Also went to the key shop to have my key duplicated for $20. It's a 2 piece key. Quite chui..lol..but serves its purpose as a spare key la..definitely not for everyday use..

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

 

I had your thinking before previously, but different situations. I bought a cheaper one,because i was in a rush and hurry.

In the end i regretted, because water still seep in through the cover.

 

It's my second Oxford cover. The first one was due to poor handling and usage.

The other thick cover from gpr, couldnt find it anymore. That shop only sell the lousier quality cover, same from gpr.