SBF MaxSym Cafe

[duriandan]

I went to JK commercial, the boss also recommended me the same set up as yours.

Will call him for advice for a better recommendation and update those interested.

This one more bulky>http://www.gpscity.com/ram-mount-plastic-universal-finger-grip-clamping-cradle.html .Thats why he recommended the X shaped holder insteader

 

Did he say that the X Grips are in? Been waiting for those before I get the complete set.

[MERCENARY]

Did he say that the X Grips are in? Been waiting for those before I get the complete set.

 

I am on the waiting list number 7 lol.He said in a few days time,by this week.

But his price is on the high side, in comparison to gps city i reckon.

[jevan]

i chose this because i followed what i saw on the taiwan fb page..haha..but it seems to vibrate quite a lot during idle, dunno if reservoir mount will be better

 

I think can try put washer leh. Might help. I'll put once I find the right size.

[jevan]

I am on the waiting list number 7 lol.He said in a few days time,by this week.

But his price is on the high side, in comparison to gps city i reckon.

 

Personal experience. GPScity is cheaper than the ram mount official website. So by guess, should be cheaper than retailer?

[2992]

Guess what. Mah motors replaced my melting n fogging up headlamp assembly FOC. Both left n right!

 

My warranty had expired. But they still obliged to replace it for me andake the case known to Sym Taiwan.

 

Surprised and impressed at the same time.

[MERCENARY]

Guess what. Mah motors replaced my melting n fogging up headlamp assembly FOC. Both left n right!

 

My warranty had expired. But they still obliged to replace it for me andake the case known to Sym Taiwan.

 

Surprised and impressed at the same time.

 

Mine also replaced, but the fogging remains.

[rusty83]

I think can try put washer leh. Might help. I'll put once I find the right size.

 

put washer i scare later cannot screw in the mirror liao. without washer also like a bit hard to tighten the mirror..

[rusty83]

Guess what. Mah motors replaced my melting n fogging up headlamp assembly FOC. Both left n right!

 

My warranty had expired. But they still obliged to replace it for me andake the case known to Sym Taiwan.

 

Surprised and impressed at the same time.

 

u must be really nice to them... lol

[Sonic]

Guess what. Mah motors replaced my melting n fogging up headlamp assembly FOC. Both left n right!

 

My warranty had expired. But they still obliged to replace it for me andake the case known to Sym Taiwan.

 

Surprised and impressed at the same time.

 

Next time I want to go mah claim warranty issue I'll bring u along.

[Sonic]

Mine also replaced, but the fogging remains.

 

Mine too had fogging issue 1 week into my new ride. Went to mah, they took photos and said will take 3 months for Taiwan to reply. Till date 3months and a half months later still no sound.

Anyway my fogging went away after changing bulbs like 3 times and nv came back. So didn't bother to go after mah.

 

Maybe u can try taking out the bulbs and park them overnight or under the sun to dry the light housing.

[2992]

u must be really nice to them... lol

 

I wrote to Sym Taiwan initially to complain against the QC. Knowing that I stand no chance for warranty claim since my warranty has run out. They gave me mah email n I just forward to eugene. Things then took off from.there.

[duriandan]

I wrote to Sym Taiwan initially to complain against the QC. Knowing that I stand no chance for warranty claim since my warranty has run out. They gave me mah email n I just forward to eugene. Things then took off from.there.

 

So, the trick is to contact SYM Taiwan first, making Mah worry about their sole distributorship...

[Sonic]

anyone interested in this bracket?

 

am in the process of asking taiwan (from maxsym FB page) about prices.

 

[MERCENARY]

Mine too had fogging issue 1 week into my new ride. Went to mah, they took photos and said will take 3 months for Taiwan to reply. Till date 3months and a half months later still no sound.

Anyway my fogging went away after changing bulbs like 3 times and nv came back. So didn't bother to go after mah.

 

Maybe u can try taking out the bulbs and park them overnight or under the sun to dry the light housing.

 

Hmmm may be is because of the wrong type of bulbs thats causing the issues.

I doubt it will help, unless i change the bulbs.

[MERCENARY]

anyone interested in this bracket?

 

am in the process of asking taiwan (from maxsym FB page) about prices.

 

 

To fix a DVR or? Could you ask them to add me too? or share with me the link.They did not add me sighs.

[Sonic]

Kenny Soo 我想买这个。你们有寄送到新加坡吗?

2 hours ago via mobile · Like · 1

 

Po-chou Chiang 翔哥說~國外都有寄

about an hour ago · Like

 

Kenny Soo 那请问多少钱？运输费呢？也请让我知道买一个和五个的运费。谢谢！

44 minutes ago · Like · 1

 

Po-chou Chiang 5KG來算,用船約900NT運費~

這個很輕5個可能不到兩公斤~不是很正確,但用船運最便宜~

9 minutes ago · Like

 

Po-chou Chiang 不然就看車友有沒有人要去新加坡,幫忙帶過去,或是有新加坡的車友來台灣玩.

8 minutes ago · Like

 

源福車業 江泊洲 掛勾買了嗎

2 minutes ago via mobile · Like

 

源福車業 Kenny Soo 可用寄的~一組1200元.請先匯款.運費到付.謝謝~

 

 

this the copy paste conversation with them.

basically its NT1200 each (about S$60)

shipping is NT900 (S$45) for 5kg

5 pcs less than 2kg.

payment by remittance. (another bank extra charge)

Think kinda expensive if you add all up

[2992]

anyone interested in this bracket?

 

am in the process of asking taiwan (from maxsym FB page) about prices.

 

 

Get Bike fabricator to mimic and see how much it cost. He can powder coat also.

[rusty83]

anyone interested in this bracket?

 

am in the process of asking taiwan (from maxsym FB page) about prices.

 

 

Is it together with the front and back camera?

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

[Sonic]

Is it together with the front and back camera?

 

Sent from my HTC EVO 3D X515m using Tapatalk 2

 

No lol. The camera sold separately. But then @2992 is right. Getting it made at bike fabricator could be cheaper.

[MERCENARY]

No lol. The camera sold separately. But then @2992 is right. Getting it made at bike fabricator could be cheaper.

 

Most likely, as you save on the freight costs.

But you will need the dimensions in terms of measurements accurately.

Best to have a sample for them to replicate.

[MERCENARY]

My rim stickers and the decoration guard rubber bars are on its way.Once done will post pictures.

[naim]

Eh the bracket u fix mirror stylo sia. Can comb hair after u rch ur destination. Hahaha!

[jevan]

Eh the bracket u fix mirror stylo sia. Can comb hair after u rch ur destination. Hahaha!

 

Hahaha now you can just stick a mirror on your iu using mounting tape right. Save the $60+++. Haha!

[jevan]

put washer i scare later cannot screw in the mirror liao. without washer also like a bit hard to tighten the mirror..

 

should be can, the mirror screw part quite long. that time my iu mount using mirror, they put two washers in addition to the mount for iu.

[torti-bkk]

i got my Windshield from Greece. wow look´s nice.