SBF MaxSym Cafe

[max hammad]

was riding just now then come to a stop the bike dies off.. start again and rode like normal.. aft 500m or so the bike suddenly like no power and dies off.. try to start again but cant.. the i realise no more petrol... ooopsss...

 

i know the needle is at 'E' but i tot there is a blinking indication that going to reserve.. now i know our bike doesn't have any indication when petrol is going to reserve..

 

total petrol pump - 14.09L.. burpssss..

 

 

 

Bro.. Refer to pg 27 of this thread.. Try not to empty the tank coz it might burn ur fuel pump ... Quite scary to hear ... Our senior suggest to top up once milage reached 280km....

 

 

Btw... Whats the milage to change the gear oil.? Read frm previous post that u guys using redline gear oil... How to change? Anione can assit?

[DeZewL]

Bro.. Refer to pg 27 of this thread.. Try not to empty the tank coz it might burn ur fuel pump ... Quite scary to hear ... Our senior suggest to top up once milage reached 280km....

 

 

Btw... Whats the milage to change the gear oil.? Read frm previous post that u guys using redline gear oil... How to change? Anione can assit?

 

Yeah thats y... Hopefully nothing happen...

[rusty83]

Gear oil aka transmission oil change every 10000km. Remember quantity is 330 ml. No more. No less. Grade is 75w-140 or 80w&140

[max hammad]

Gear oil aka transmission oil change every 10000km. Remember quantity is 330 ml. No more. No less. Grade is 75w-140 or 80w&140

 

 

Thank you very strong...!!!

 

Everyday we're shuffelin

[DeZewL]

Thank you very strong...!!!

 

Everyday we're shuffelin

 

tuuut duuut tuuut duut tuut tuut.. hahaha..

 

Gd morning!

[max hammad]

tuuut duuut tuuut duut tuut tuut.. hahaha..

 

Gd morning!

 

morning DeZewl... hahaha

[rusty83]

how much u bought the oil filter at teospray bro?

$15. The guy told me that was the last piece coz i wanted to buy 3..

[aN_An]

$15. The guy told me that was the last piece coz i wanted to buy 3..

 

Unique motor sell at 25 oil filter.. hahaa.. jz for info... cheers guys..

 

 

---

I am here: http://tapatalk.com/map.php?dogdvr

[DeZewL]

$15. The guy told me that was the last piece coz i wanted to buy 3..

 

Thx rusty..

[DeZewL]

Unique motor sell at 25 oil filter.. hahaa.. jz for info... cheers guys..

 

 

---

I am here: http://tapatalk.com/map.php?dogdvr

 

Thx for the info..

[DeZewL]

Tot of having a short meet up tmr in the evening.. Any1 keen?

[max hammad]

Unique motor sell at 25 oil filter.. hahaa.. jz for info... cheers guys..

 

 

---

I am here: http://tapatalk.com/map.php?dogdvr

 

 

Weda enterprise does bring in our parts.. Tel:62979429 to enquiry.. Located at 17 rowell rd.. Next to FJT...

[max hammad]

Oil filter $12 at weda(rowell rd)

[DeZewL]

Oil filter $12 at weda(rowell rd)

 

Yeah thats right twelve bucks for oil filter..

 

They have stock for our belt and rollers too..

 

Belt - $160

Roller - $60

 

i got snap a pic on both belt and roller.. I can post it here if u guys want it.. cheers..

[rusty83]

i just tried again going on the expressway and the RPM reading is around 5.5k(physically feels like 7k RPM) when i hit 120km/hr and also the vibration is quite high...feels like the engine gonna explode..lol..dont dare to whack some more..

 

does anyone else feels that the speedometer and rpm meter seems a bit retarded..? my needle sometimes "skips" instead of gradually going up and down..and it feels like the reading is wrong..

[aN_An]

Yeah thats right twelve bucks for oil filter..

 

They have stock for our belt and rollers too..

 

Belt - $160

Roller - $60

 

i got snap a pic on both belt and roller.. I can post it here if u guys want it.. cheers..

 

u know the opening hours.?? hmm

[etkach3]

Yeah thats right twelve bucks for oil filter..

 

They have stock for our belt and rollers too..

 

Belt - $160

Roller - $60

 

i got snap a pic on both belt and roller.. I can post it here if u guys want it.. cheers..

post the pix here la:} its made in japan right?

[etkach3]

i just tried again going on the expressway and the RPM reading is around 5.5k(physically feels like 7k RPM) when i hit 120km/hr and also the vibration is quite high...feels like the engine gonna explode..lol..dont dare to whack some more..

 

does anyone else feels that the speedometer and rpm meter seems a bit retarded..? my needle sometimes "skips" instead of gradually going up and down..and it feels like the reading is wrong..

so far it works fine for me..engine wise also at over 12okm/h there is lil vibration..hmmmm

if u feel heavy wen riding at high speed, u shld check your tyre pressure bro..coz previously i encounter the bike so hard to go up to 11okm/h skali i check my tyre pressure in the rear is 3opsi, it shld be 36psi...after that is okay

Also depend on the EO that u r using bro..coz i try alot of brands, and so far the best is AGIP

[DeZewL]

i just tried again going on the expressway and the RPM reading is around 5.5k(physically feels like 7k RPM) when i hit 120km/hr and also the vibration is quite high...feels like the engine gonna explode..lol..dont dare to whack some more..

 

does anyone else feels that the speedometer and rpm meter seems a bit retarded..? my needle sometimes "skips" instead of gradually going up and down..and it feels like the reading is wrong..

 

haven try above 5000rpm yet still on running in..

 

but i've notice too my speedometer and rpm needle "skip" rather then gradually going up or down.. guess its normal?

[DeZewL]

u know the opening hours.?? hmm

 

im not sure what time they open but closes at 6pm.. i think they open by 9am thou..

[DeZewL]

so far it works fine for me..engine wise also at over 12okm/h there is lil vibration..hmmmm

if u feel heavy wen riding at high speed, u shld check your tyre pressure bro..coz previously i encounter the bike so hard to go up to 11okm/h skali i check my tyre pressure in the rear is 3opsi, it shld be 36psi...after that is okay

Also depend on the EO that u r using bro..coz i try alot of brands, and so far the best is AGIP

 

etkach3, which type and grade of AGIP ur using bro?

 

btw, saw ur earlier post u got bulb for our headlights? our is using H1 type?

[DeZewL]

Belt

 

http://img.tapatalk.com/dcff0192-e56c-8b00.jpg

 

Roller (8pcs, 15grams)

 

http://img.tapatalk.com/dcff0179-e5bc-0dde.jpg

 

And yes it is made in Japan!! But only for the belt je..

 

The roller is made in Taiwan..

[max hammad]

so far it works fine for me..engine wise also at over 12okm/h there is lil vibration..hmmmm

if u feel heavy wen riding at high speed, u shld check your tyre pressure bro..coz previously i encounter the bike so hard to go up to 11okm/h skali i check my tyre pressure in the rear is 3opsi, it shld be 36psi...after that is okay

Also depend on the EO that u r using bro..coz i try alot of brands, and so far the best is AGIP

 

Me using motul 300V full syn... But expensive la per btl.. $32.. But vibration not so bad..

 

Etkach: mt tyre pressure i pump rear 40 psi front 38 psi... Hahaha love the hardness... Heheh bro 30/30psi for pasir gudang use lehhhh... Hehehe

[max hammad]

Belt

 

http://img.tapatalk.com/dcff0192-e56c-8b00.jpg

 

Roller (8pcs, 15grams)

 

http://img.tapatalk.com/dcff0179-e5bc-0dde.jpg

 

And yes it is made in Japan!! But only for the belt je..

 

The roller is made in Taiwan..

 

 

I like the quote.. But only the belt je...

[max hammad]

i just tried again going on the expressway and the RPM reading is around 5.5k(physically feels like 7k RPM) when i hit 120km/hr and also the vibration is quite high...feels like the engine gonna explode..lol..dont dare to whack some more..

 

does anyone else feels that the speedometer and rpm meter seems a bit retarded..? my needle sometimes "skips" instead of gradually going up and down..and it feels like the reading is wrong..

 

 

Bro try use diff brand of EO... Like etkach says agip... Motul also not bad.. The semi syn 3100 ($13)or the 5100..(20).. Just my opinion only..