Honda NSR150SP Riders

[DonutBoy77]

Haha. Should be wiring bah. I had the exact same problems when i just got my bike.

 

My headlight now also only got 1. Let your mechanic fix it, mine did it for me free.

 

but now cant even start leh.. $25 just to fix wiring.. like damn waste sia

[bailin_eg6]

but now cant even start leh.. $25 just to fix wiring.. like damn waste sia

 

You park at multi storey carpark or?

[DonutBoy77]

You park at multi storey carpark or?

nope, no roof

[bailin_eg6]

nope, no roof

 

Aiya sian. When you push start, what kind of sound does your engine make? Is it the going to start sound, or totally nothing going on?

[DonutBoy77]

Aiya sian. When you push start, what kind of sound does your engine make? Is it the going to start sound, or totally nothing going on?

not really sure leh, hard to push start with kick starter leh

 

dk if i even doing it right

[bailin_eg6]

not really sure leh, hard to push start with kick starter leh

 

dk if i even doing it right

 

Hmm. Kick to gear 1, clutch in, start pushing, gain some speed, throw clutch, hear the engine like starting, quickly clutch in and throttle. Repeat. Best if got some kind of slope nearby

[DonutBoy77]

Hmm. Kick to gear 1, clutch in, start pushing, gain some speed, throw clutch, hear the engine like starting, quickly clutch in and throttle. Repeat. Best if got some kind of slope nearby

o.o no need kick one? just hold clutch, run, throw, grab, throttle?

[XxPJYxX]

o.o no need kick one? just hold clutch, run, throw, grab, throttle?

 

Sit on your bike, pedal forward fast... When about 10-20km/h u kick gear 1... And rev...

[DonutBoy77]

Sit on your bike, pedal forward fast... When about 10-20km/h u kick gear 1... And rev...

oh, push in neutral first, then fast enough clutch in, gear 1, and then release clutch + throttle like normal?

[XxPJYxX]

oh, push in neutral first, then fast enough clutch in, gear 1, and then release clutch + throttle like normal?

 

Yup, throw clutch and throttle same time... Because the bike rolling to a stop... Every second counts...

[DonutBoy77]

Yup, throw clutch and throttle same time... Because the bike rolling to a stop... Every second counts...

ok i gonna try later. thx

[XxPJYxX]

ok i gonna try later. thx

 

Np, but if possible,try pushing it till 30-40 kmh and kick gear 2... Less resistance on the gears and tyres, easier to start... Cos u kick gear 1, the gears grip too strong, might make your tyre skid...

[DonutBoy77]

hey guys, tried to push start, but failed, engine just sputter abit and die off. time for towing?

[ki113r]

Sounds like wiring fault. Just tow it ba

[surfbug]

hey guys, tried to push start, but failed, engine just sputter abit and die off. time for towing?

 

after towing, tell the mech all the problems one shot so he can check the main & minor problems at one go.

and..... he'll definitely prepare a list of things which allegedly is spoilt/deteriorating. if you're low on funds, fix the necessaries

e.g tire wear & tire (please do not ever take the chances, especially when it rains, your life is jeopardized), break pads...

 

just to scare you alittle, picture this... when you're there at the shop, the mech is literally the chopper, and you're placed nicely on the board =)

[Red Machine]

after towing, tell the mech all the problems one shot so he can check the main & minor problems at one go.

and..... he'll definitely prepare a list of things which allegedly is spoilt/deteriorating. if you're low on funds, fix the necessaries

e.g tire wear & tire (please do not ever take the chances, especially when it rains, your life is jeopardized), break pads...

 

just to scare you alittle, picture this... when you're there at the shop, the mech is literally the chopper, and you're placed nicely on the board =)

Lols and thats when they will say coil, cdi, rectifier any possible and expensive stuff spoilt already...best thing they make sure they dismantled the bike 1st...then they will say this and that spoilt...if you say dont want to change also cannot cos everything opened up already...so end up bo pian must die die throw money...

[wad3v3r]

hey guys, tried to push start, but failed, engine just sputter abit and die off. time for towing?

 

just tow to reputable shops and do lah. they wont tock u one.. weekday morning if u free tow to planet motorcycles.. let the uncle see.. he normally will change only if needed.. else he will just fix it .

 

 

anyway i forgot one thing.. DID U CHECK UR CHOKE IS IT PULLED UP? choke up also will cause engine to die off.. IFFFF u very free u try disconnect the batt and kickstart.. i had a problem that time but its because batt dead .. cannot start also...

 

though i doubt the above is the problem lar.. since ur headlight and all screwed up liao..

Edited January 27, 2013 by wad3v3r

[wad3v3r]

Lols and thats when they will say coil, cdi, rectifier any possible and expensive stuff spoilt already...best thing they make sure they dismantled the bike 1st...then they will say this and that spoilt...if you say dont want to change also cannot cos everything opened up already...so end up bo pian must die die throw money...

 

change wiring harness liao . change cdi liao. change rect liao. change batt. change coil/alt . still cannot. end up is kill switch spoil .. ultimate troll i tell u..

[wait4me]

Sure, thanks for your help. Cause recently i just tried some agl shop, and the mechanic was trying to con me. I just start my bike and rode off.

share your story leh

anyone know whats the average price for towing? the shops in bukit merah area. thx

25 mostly and bike bulance up to 50

 

Sounds like wiring fault. Just tow it ba

25 dollar leh , expensive u know .. (sorry going to be mean .. )

[ki113r]

25 dollar leh , expensive u know .. (sorry going to be mean .. )

 

Lol.. If i not wrong, HKL charges $20 for regular customers.

 

DonutBoy77, try calling Chen Long @ 9383 1261.

[Red Machine]

change wiring harness liao . change cdi liao. change rect liao. change batt. change coil/alt . still cannot. end up is kill switch spoil .. ultimate troll i tell u..

True true not trying to scare ppl but alot happening already especially always kena are newbie...best after all changed problem not solved...

[wait4me]

change wiring harness liao . change cdi liao. change rect liao. change batt. change coil/alt . still cannot. end up is kill switch spoil .. ultimate troll i tell u..

nvm la, u almost fully service your bike liao . so left full servicing for your bike .. then its good as new

 

Lol.. If i not wrong, HKL charges $20 for regular customers.

 

DonutBoy77, try calling Chen Long @ 9383 1261.

but must tow to HKL right ?

[ããƒãƒ¼ãºZERO]

share your story leh

25 mostly and bike bulance up to 50

 

25 dollar leh , expensive u know .. (sorry going to be mean .. )

 

I went there, do full service then they take out my block and piston say got scratches, i see very light only. The mechanic keep call me overhaul he told me less than 1 month sure piston jam. After 2-3 month i go back my sg shop mechanic open up say this is very light scratches only polish abit can liao where need overhaul.

 

Then he still tell me my conrod going give way, my sg mechanic tell me ok what working fine.. Now i've been riding 5-6 months nth happen. Still smooth lol.

[ki113r]

nvm la, u almost fully service your bike liao . so left full servicing for your bike .. then its good as new

 

but must tow to HKL right ?

 

I think so? Arbo he should be charging higher ba.

[wait4me]

I went there, do full service then they take out my block and piston say got scratches, i see very light only. The mechanic keep call me overhaul he told me less than 1 month sure piston jam. After 2-3 month i go back my sg shop mechanic open up say this is very light scratches only polish abit can liao where need overhaul.

 

Then he still tell me my conrod going give way, my sg mechanic tell me ok what working fine.. Now i've been riding 5-6 months nth happen. Still smooth lol.

oh well , there will still be many other supporters.

 

anyway i kana something like yours too .