RXZ

[AliKopter]

hmmm

got tell u guys this tip

should u go jb to modify your bikes such as porting and setting...

do use original air jet and oil jet

the ones jb motorshops uses are usually local ones

they have .5 which the ori dont have

 

i usually buy my oil jet and air jet at automachinery

much cheaper...

i oso buy for my malaysian frens

 

things that are cheaper in sg...

original air jet , oil jet

original gasket

original piston and etc

coz they really come from japan while in malaysia... the originals are send to kuala lumpur and not evenly distributed in the country and that thailands imitation stuffs easily available

[bloodybaguz]

Originally posted by AliKopter@Jun 2 2005, 10:37 AM

hmmm

got tell u guys this tip

should u go jb to modify your bikes such as porting and setting...

do use original air jet and oil jet

the ones jb motorshops uses are usually local ones

they have .5 which the ori dont have

 

i usually buy my oil jet and air jet at automachinery

much cheaper...

i oso buy for my malaysian frens

 

things that are cheaper in sg...

original air jet , oil jet

original gasket

original piston and etc

coz they really come from japan while in malaysia... the originals are send to kuala lumpur and not evenly distributed in the country and that thailands imitation stuffs easily available

[AliKopter]

can i share with u guys another tip

im using a 125z standard ekzos

modified into my rxz

and the pickup is great

rxz standard ekzos can only go 100km/h

this one with everything else standard except with this 125z ekzos

i can reach 140 ,open have open have(pickup)

and the bike is not high ram which is bad when riding slow.. have to force open oni

sound oso standard, petrol oso not much eat

 

it seems that this ekzos already in kl and malacca

rxz riders have been using extensively

 

u guys wan... i can reccomend my frens shop in jb

i think to get the ekzos and modify ard more less s$200/-

[adyra]

ur frens shop in jb where?

we go do bike there got discount or not?

[AliKopter]

aiyah malaysian rm oso wan to discount?

if s$200rm is ard rm$400... i think ard rm$200 - $300

kerhkreherh

brader... i cannot advertise the address here.

its against the website policy

 

anything pm me

[bobktm2]

I have a problem lately with the RXZ chain.. Recently when riding, i can feel the chain rubbing something and caused some friction. This friction became worse when i brake the bike.

 

I had changed chain and sprockets a few months back and the problem disappear. But after i had tightened the chain, the problem comes back.

 

Is it because of the master link? do anybody experience this problem before?

[AliKopter]

hmmm chain rubbing...

 

u have to check... whether the bearing in the

rim hub has already wear and tear

then another thing ,... whether the mainstand or side stand is

hitting on the chains or most probably the chainguard dented

 

at worst, could be your chain which is spoilt.

although the chain maybe new.... some times new oso can spoil

 

to check... put your bike to mainstand

and free gear,...then use your hands to rotate the back tire

and then check whats wrong.

do this as many times until u found the problem.

[faris]

chain too tight. thats why. chanin too tight and your suspension too soft. so when u sit on the bike. the chain become even tighter. no matter how much you get down on your bike and spin your rear wheel, you cant find the problem.

[AliKopter]

hei guys, back again

 

can i reccomend something

i change my spock plus spray rims

 

u wan something like this...

everything included

sand, spray rim, laquer, fixed color spock, fine tune spock, etc

cost ard rm$120- 100.. oni s$50

 

attached are my pic...

mind my bike not chio enuff

[AliKopter]

heres another

[AliKopter]

n another

[AliKopter]

 

n another

[AliKopter]

another

[AliKopter]

:sweat:

:sorry:

 

lastly and finally

 

pls comment or pm

[AliKopter]

:thumb:

[bloodybaguz]

Originally posted by AliKopter@Jun 23 2005, 02:21 PM

hei guys, back again

 

can i reccomend something

i change my spock plus spray rims

 

u wan something like this...

everything included

sand, spray rim, laquer, fixed color spock, fine tune spock, etc

cost ard rm$120- 100.. oni s$50

 

attached are my pic...

mind my bike not chio enuff

hi,juz asking can the paint will peel off for quite sumtime?

thinking of doing dat at my d.i.d rim.

[mat-vtech]

i juz bot a second hand rxz today..juz want to check if any of u guys have any ideas on how to make the original pipe sound nicer..im using the plain original n the sound sucks like mat kental or feels like i juz passed my 2b yesterday..anyway i prefer a legal solution koz was caught b4 for illegal mod so cant afford to kene caught for the second time..pls comment,thanks in advance..

[AliKopter]

hmmm

 

the first answer.... got laquer mahh .. so no peeling off.

with y2k laquer will shine more.

but then... the spokes... i bought at ahboy jb.. the quality not that good

i meant was the between the spokes and the rim...that part..rust arr

damnshit! i guessed i never took care of my bike.. lazy ar..

one of this days.. i'll wash and scrape off the rust.

 

the second answer.... for your std pipe..

y not u change the silencer to the tzm silencer..

abit more degil.. or u can take out the spunch off the air filter box..

so the sound more nicer.

 

hmmm

 

[AliKopter]

the between the spokes and the rim...that part..rust arr

kerhkrehkrehkerhrk

[Ajimey]

So e spokes n rims ok la? Den I suggest U go change those nuts.... Dun go so far til JB, S'pore can oredi...

[5tr4ng3r]

Info and the specification can be found at the following URL.

 

http://www.hlcorp.com.sg/motorcycles/produ...2&productID=770

 

The above website cannot be reached. Any alternatives? I just need to know the fuel consumption.

[Manfred003]

Hi Guys , Any Advice On Internal mods ???

[izz]

mod,mod,mod

[Bermudian]

please help me, i need some parts for my rx-z. i am lookin for a 57.8mm piston with rings. if any one knows where i can find one or a y-1 block and piston to match that would be great. if theres a website to order parts off please let me know i have been searching forever. I am also willing to buy second hand blocks and other performance parts if anyone can help out. let me know your price, my email is [email protected]

[OJH]

i always have problems changing to neutral gear.Is it because of the clutch plate is faulty?