[Group] YAMAHA RXZ

[kimber]

Originally posted by adyra@Jun 19 2006, 01:48 AM

firstly, ur tank original? wat happen to ur tank? wat type of paintwork u wanna spray? more detail pls.

Hi, yeah the tank is original. the previous owner i think topped up too muhc fuel and it overflowed causing the paintwork to fade and its not very nice.

 

even if its a respray, nothin fanciful.. so yeah.. .

 

btw how much wld a respray of the bike cost? i thot of jus gettin new fairings.. wat say u?

[adyra]

ok so ur tank is original. original tank cost 200-300+ sing dollars. tank only. n the tail fairing would cost ard 70+ original ones total would b up to 400 sing dollars ard there +-. so its up to u to decide. for local tank n tail would cost ard 100 sing dollars altog. respray of bike depends. jb diff price singapore oso diff price. can ask for quotes of price first. price varies of design whether its simple or complicated. paintwork range from 100 - 300 sing dollars.

[kimber]

thanks for the info hey:)

[bloodybaguz]

Originally posted by waadee@Jun 19 2006, 03:21 PM

in singapore where can i go to open the end can and remove the baffles??

 

my bike bajaj.. so i hand itchy and wan info on such things

wahhh..... u never sayang ur pipe huh?

later u regret.

[bloodybaguz]

Originally posted by adyra@Jun 20 2006, 03:09 PM

ok so ur tank is original. original tank cost 200-300+ sing dollars. tank only. n the tail fairing would cost ard 70+ original ones total would b up to 400 sing dollars ard there +-. so its up to u to decide. for local tank n tail would cost ard 100 sing dollars altog. respray of bike depends. jb diff price singapore oso diff price. can ask for quotes of price first. price varies of design whether its simple or complicated. paintwork range from 100 - 300 sing dollars.

yo bro adi, ur motherboard ok oredi hah?

[jauhary]

I dunno la but when in neutral gear the bike at the engine there bunyi like kacang like dat. Some say my piston needs reboring. Others say its my clutch plates(baru tukar,so not dat). So i dunno.. I dont wanna waste anymore money on the noise so now its the fact tt when i bike exceeds 80kmh it starts to vibrate,mcm tak cukop minyak masok. But when it reaches 100kmh it will accelerate giler babi without extra throttling! My fren sez my pin? is bengkok? Or my throttle cable got some problems.. So wat do i say to my mechanic?

 

To make more power all i did was service my exhaust n top end.

 

Oh and the mechanic sez the previous owner has modded my block which he shows a sligth cut of metal in the block.

 

Should i ask my mechanic to check my piston? Or wat..

 

Damn, i outta learn the parts of my bike..

[jauhary]

Btw..syg siak my bike.

Used to be able to do a small wheelie when i drag my 1st gear but now..

I think i spoilt my bike with too much dragging..

[adyra]

Originally posted by bloodybaguz@Jun 20 2006, 09:42 PM

yo bro adi, ur motherboard ok oredi hah?

blum lagi tuka. nanti bila free aku pegi sim lim.

[adyra]

Originally posted by jauhary@Jun 20 2006, 10:31 PM

I dunno la but when in neutral gear the bike at the engine there bunyi like kacang like dat. Some say my piston needs reboring. Others say its my clutch plates(baru tukar,so not dat). So i dunno.. I dont wanna waste anymore money on the noise so now its the fact tt when i bike exceeds 80kmh it starts to vibrate,mcm tak cukop minyak masok. But when it reaches 100kmh it will accelerate giler babi without extra throttling! My fren sez my pin? is bengkok? Or my throttle cable got some problems.. So wat do i say to my mechanic?

 

To make more power all i did was service my exhaust n top end.

 

Oh and the mechanic sez the previous owner has modded my block which he shows a sligth cut of metal in the block.

 

Should i ask my mechanic to check my piston? Or wat..

 

Damn, i outta learn the parts of my bike..

i tink shld be ur piston n piston ring tat makes the sound. but frankly speaking, i have no idea on how to rebore a piston. The 'some' tat u say must rebore piston is ur mech? or ur friend? hehehehehe funny leh rebore piston.

 

U said u service ur exhaust n top end? for the exhaust wat did or how did u service it? cut to halve n decarbonise (burn)? got take out the stopper? previously ur pipe mod?

 

For the top end, wat u mean by service ur top end? Top end in general people describe the top speed of the motorbikes speed.... so i just wondering wat is service top end? funny leh ur source of info all never heard before.

 

N for the block got mod, mayb previously the ex owner have ported the block. tat mod is called porting.

 

Dun hear people say this n tat. for the pin, wat pin? did he mean jet needle? if u wanna check the jet needle, just unscrew the top of the carb there u pull out to see ur needle whether bengkok or not. if u dunno how, just visit ur fav mech to help u see.

 

So u saying previously ur bike can pop (not small wheelie. there's no small or big wheelie) Every bike can pop. its just the matter of how u do it.

 

Btw, which shop did u go to do all these things like wat u said u serviced? It is advisable u do a full service for the block n check the piston n piston rings. If ur pipe is mod, u have to rejet (have to check the jetting in the carb) n get ur bike tuned properly. air n fuel mixture have to be correct. if not ur block will still sound like kacang again regardless on how many times u change ur piston n rings oso pointless. rxz block no matter how will b a bit of noise. 2 stroke, wat do u expect but not like kacang la. hehehehehehehe

 

diff kacang got diff noise. kacang putih, kacang hijau, kacang kuda? if wanna noe more bout kacang can ask bloodybaguz. he is more expert in kacang.

[mfaisalby]

Kwan2 smua...

 

Kita ingin tahu the pressure (PSI) untuk tayar Dunlop T900 80/80?

 

Brp nak kena set pat pump machine tu?

 

My bike depan ngn blakang pkai same tayar (T900 80/80).

 

Dua2 tayar kena same pressure? ke depan dgn blakang nk kena lain?

[Alexevo]

Originally posted by SK I@Jun 18 2006, 10:45 PM

Hi RXZ riders...if I find the sitting posture too high on my RXZ, and the rear suspension is already at it's lowest (meaning highest click level) , how can I lower the bike some more without cutting seat? Is there any RXZ suspension which is shorter??? Where to get?

hi.my rear suspension is shorter..u don mind changing wit me?..pm me if u wan.we'll arrange a mitting..thxs..

[waadee]

i sayang my pipe.. but my bike got no top speed.. at least i need to reach 120... if not left behind by my work buddies when going johor

[adyra]

Originally posted by mfaisalby@Jun 21 2006, 01:55 AM

Kwan2 smua...

 

Kita ingin tahu the pressure (PSI) untuk tayar Dunlop T900 80/80?

 

Brp nak kena set pat pump machine tu?

 

My bike depan ngn blakang pkai same tayar (T900 80/80).

 

Dua2 tayar kena same pressure? ke depan dgn blakang nk kena lain?

pressure tayar depends on kau slalu pillion ke tak ke atau kau ringan ke berat ke.

80/80 200 psi bleh. kau try dulu tgk kalau bila hujan rasa macam tak grip sangat bleh buang angin sikit. tapi kalau masih ok kau nak try 220 ke. pat tayar takde tulis ke? try tgk dulu.

[mfaisalby]

Originally posted by adyra@Jun 21 2006, 02:35 PM

pressure tayar depends on kau slalu pillion ke tak ke atau kau ringan ke berat ke.

80/80 200 psi bleh. kau try dulu tgk kalau bila hujan rasa macam tak grip sangat bleh buang angin sikit. tapi kalau masih ok kau nak try 220 ke. pat tayar takde tulis ke? try tgk dulu.

Alright ah... Thanks!

 

Hmm... entah eh. Pat tayar aku cuma nmpak dorang tulis T900 80/80 je. PSI takde plak.

 

Anyway, thanks again adyra!

[AllHailKingHenry]

Watisup dudes and dudettes,my piston and piston ring just changed, so do i need to run in? If need, then how to do it? sorry rxz noob here....

[faris]

better to use mineral base 2t during running in period. warm up for 15mins cool for 30 mins then warm up for 15mins cool for 30 mins

then ride for 15mins/50-60kmh max then cool for 30 mins. then ride for 15mins/ 60-70km/h max then cool for 30. then 15mins 70 to 80max then cool then lastly ride for 15mins 80 to 90kmh then cool for 30mins. try it bro! then next step change your 2T to a better brand

[bloodybaguz]

Originally posted by adyra@Jun 21 2006, 01:07 AM

diff kacang got diff noise. kacang putih, kacang hijau, kacang kuda? if wanna noe more bout kacang can ask bloodybaguz. he is more expert in kacang.

ya ya diff kacang got diff noise .

but really dun want to hear e kacang noise

change to 4 stroker bike

dat will solve e problem.

[bloodybaguz]

Originally posted by waadee@Jun 21 2006, 11:42 AM

i sayang my pipe.. but my bike got no top speed.. at least i need to reach 120... if not left behind by my work buddies when going johor

since ur bike can't go 120,might as well ask ur

buddies to go slow abit la.

u n ur buddies racing at johor ar???

[bloodybaguz]

Originally posted by adyra@Jun 21 2006, 03:35 PM

pressure tayar depends on kau slalu pillion ke tak ke atau kau ringan ke berat ke.

80/80 200 psi bleh. kau try dulu tgk kalau bila hujan rasa macam tak grip sangat bleh buang angin sikit. tapi kalau masih ok kau nak try 220 ke. pat tayar takde tulis ke? try tgk dulu.

ya kalo mau buang angin biar buang kat tube tayar

jgn buang kat lobang kentut sua la hahahahahahaha

[faris]

SIAPA SIAPA SINI INTRESTED NAK GO PASIR GUDANG MAIN TACK?

 

1.FARIS

2.

3.

[Ajimey]

Originally posted by faris@Jun 21 2006, 10:42 PM

SIAPA SIAPA SINI INTRESTED NAK GO PASIR GUDANG MAIN TACK?

 

1.FARIS

2.

3.

Main track eh? Brape bayaran nye ah? Wats e minimum attire?

Paiseh seh nak gi main track moto kecik... Kalo banyak nak pegi aku join je tapi tak main track ah...

[faris]

bayar murah je lah bawak duit dalam 50-100 rm cukup siap ngan makan minyak rokok semua. kita organize trip lah gik ramai ramai then siapa nak main main lah! kau tak main takpe jaga barang barang ok? aku set date lagi 2 bulan from now ok? enought time untuk carik member pinjam fullsuit and full face

[faris]

these are the things you must have

 

gloves, back protector, leather jackets, army boots, jeans and skating knee guard. skating knee guard kene pakai kat luar jeans.

 

those who wanna form up a team to go play at pasir gudang using rxz in 2mth times pls reply here ok! we are organizing a trip. and help i need someone to go there i myself never been there before!!!!

[waadee]

Originally posted by bloodybaguz@Jun 21 2006, 10:03 PM

since ur bike can't go 120,might as well ask ur

buddies to go slow abit la.

u n ur buddies racing at johor ar???

no lah brader we going for makan makan...

 

ask them to slow?? brader when u got big bike like fireblade and fazers.. u tink they wan to ride slow

[adyra]

Originally posted by faris@Jun 21 2006, 09:49 PM

better to use mineral base 2t during running in period. warm up for 15mins cool for 30 mins then warm up for 15mins cool for 30 mins

then ride for 15mins/50-60kmh max then cool for 30 mins. then ride for 15mins/ 60-70km/h max then cool for 30. then 15mins 70 to 80max then cool then lastly ride for 15mins 80 to 90kmh then cool for 30mins. try it bro! then next step change your 2T to a better brand

ni cara macam untuk 4 stroke nya je.

wats the advantages of using this break in?