[Group] YAMAHA RXZ

[logen1836]

Hey guys.

How will i know when its time for me to change my clutch plates?

Cos its been quite often dat whenever i change from gear 1 to gear 2, its still @ gear 1. den i gotta kick up again.

[khidd]

guys, im using this OEM fast throttle and cant seem to tighten and minimize my throttle free-play.. its loosening the nut further apart from each oth right? i loosen the nut till it came out abit also there still alot of freeplay.. hmm.. how eh?

 

and where can i buy a red metal chain guard and fork brace? haha..

[blurchaoz]

hi guys.. im riding a 1st hand rxz. but few problems dat i cudnt solve. hope u guys out they can help me.

1. bike very hard to start. must turn on choke all the time. warm up very slow. but once warm up alredy, bike no problem.

 

Take note that spark plug has been replaced to new ones. Carb serviced. And its first hand!

 

its ur air jetting that u need to change so tat u can start ur bike easier. change it to a bigger size bro.. and when u ride u feel a lil bit difference as well.

 

Hey guys.

How will i know when its time for me to change my clutch plates?

Cos its been quite often dat whenever i change from gear 1 to gear 2, its still @ gear 1. den i gotta kick up again.

 

that is pretty normal for some old rxz. but if u want to know if its ur clutch plate put it on main stand start ur bike on neutral. if ur wheel rear wheel spins that its ur clutch plates.

[wantongkol07]

its ur air jetting that u need to change so tat u can start ur bike easier. change it to a bigger size bro.. and when u ride u feel a lil bit difference as well.

 

 

 

that is pretty normal for some old rxz. but if u want to know if its ur clutch plate put it on main stand start ur bike on neutral. if ur wheel rear wheel spins that its ur clutch plates.

 

thanks for the good info.

[logen1836]

its ur air jetting that u need to change so tat u can start ur bike easier. change it to a bigger size bro.. and when u ride u feel a lil bit difference as well.

 

 

 

that is pretty normal for some old rxz. but if u want to know if its ur clutch plate put it on main stand start ur bike on neutral. if ur wheel rear wheel spins that its ur clutch plates.

 

hey thanks for e info man!

will try tom morning!

[boi_s]

anyone knows how much and where for box and rack ? not so big, size that can fit 1 helmet

[nosey]

i need to know how to tighten the nut on the sidebox on the leftside where the battery is located..when i tighten the nut, the cover will somewhat came off by itself..did anyone ever came across this problem like i do?i'm still a newbie here and i would like to learn more from the rxz pros from this thread..

Edited March 15, 2010 by nosey

[blurchaoz]

i need to know how to tighten the nut on the sidebox on the leftside where the battery is located..when i tighten the nut, the cover will somewhat came off by itself..did anyone ever came across this problem like i do?i'm still a newbie here and i would like to learn more from the rxz pros from this thread..

 

there should be a nut at the back of the screw... so when ur tightening it u need to hold on to the nut at the back as well....

[crystalgal]

helping my friend sell his RXZ parts

 

http://www.singaporebikes.com/forums/showpost.php?p=6253041&postcount=101

[khidd]

i need to know how to tighten the nut on the sidebox on the leftside where the battery is located..when i tighten the nut, the cover will somewhat came off by itself..did anyone ever came across this problem like i do?i'm still a newbie here and i would like to learn more from the rxz pros from this thread..

 

I did encounter this..was riding home skali then i realised my side cover went missing..so i guessing the nut must have loosen due the vibration of the bike..

 

So i bought a new side cover from LAB together with a long long screw and a nut..well i guess it worked well because my side cover is still there..

i guess putting another nut and tighten the two nuts into each other would work pretty well too..but i think it will be like abit hard to take it off when u need to.. Another way is do like what my uncle did which is to put a little bit of somekind of glue at the end of the screw..that way the nut can only be loosen with an extra amount of force and not the vibration..

[DeXirant]

hi all...ive just bought a fs rxz few days ago n i think the bike needs overhaul...any shop that is recommended both in sg n m'sia??

 

btw, when u all service ur bike, what do u usually do? n how much does it cost??

 

newbie on rxz...

[nosey]

I did encounter this..was riding home skali then i realised my side cover went missing..so i guessing the nut must have loosen due the vibration of the bike..

 

So i bought a new side cover from LAB together with a long long screw and a nut..well i guess it worked well because my side cover is still there..

i guess putting another nut and tighten the two nuts into each other would work pretty well too..but i think it will be like abit hard to take it off when u need to.. Another way is do like what my uncle did which is to put a little bit of somekind of glue at the end of the screw..that way the nut can only be loosen with an extra amount of force and not the vibration..

 

do lock nut does the job for the side cover?if it does, where can i get one?right now i'm using a cable tight

[wantongkol07]

yessa, alot of rxz riders now. wooo.

[logen1836]

yessa, alot of rxz riders now. wooo.

 

yeah man. seems like the trend is coming baq!

[logen1836]

I went to service my carb @ Hou Heng Motors last nite.

They did a gd job. Bike is running smoothly now.

But while the mech was revving my bike, i cld hear a loose ringing sound

coming from my block. The mech mentioned dat my piston ring

is loose but i still can ride la.

 

1. Is there any disadvantages on the long run?

2. Must i change the piston ring alone or more major stuffs?

 

This bike was given to me by my uncle who rode this bike

as a means of transport for e past 8 years as the 1st owner.

Jus wanna get more info from the RXZ 'professionals' here.

Tks!

[blurchaoz]

I went to service my carb @ Hou Heng Motors last nite.

They did a gd job. Bike is running smoothly now.

But while the mech was revving my bike, i cld hear a loose ringing sound

coming from my block. The mech mentioned dat my piston ring

is loose but i still can ride la.

 

1. Is there any disadvantages on the long run?

2. Must i change the piston ring alone or more major stuffs?

 

This bike was given to me by my uncle who rode this bike

as a means of transport for e past 8 years as the 1st owner.

Jus wanna get more info from the RXZ 'professionals' here.

Tks!

 

change your rings if possible. a loose piston ring can create white smoke from ur exhaust pipe. it can also create lots of scratches on your block wall.

for the time being my advise is not to do hard rev on ur rxz bro...

[bleeeek]

do lock nut does the job for the side cover?if it does, where can i get one?right now i'm using a cable tight

 

Dont much about rxz but if vibration is the cause of loosening nut then yes. i guess lock nut is the best solution.but i dont know how much and where though. maybe 2 shops to the right of LAB? the one where the person selling look like ah bengz. they got a lot of screws and nut washers stuff there. but i think just slightly ex.

[nosey]

Dont much about rxz but if vibration is the cause of loosening nut then yes. i guess lock nut is the best solution.but i dont know how much and where though. maybe 2 shops to the right of LAB? the one where the person selling look like ah bengz. they got a lot of screws and nut washers stuff there. but i think just slightly ex.

 

thanks for the info..imma try and look for the lock nut at any hardware shops..i hope they have though..

 

btw guys, when is the time do i need to do servicing for my bike?i'm still a noob though..thanks for the info yar..

[logen1836]

change your rings if possible. a loose piston ring can create white smoke from ur exhaust pipe. it can also create lots of scratches on your block wall.

for the time being my advise is not to do hard rev on ur rxz bro...

 

Oh! Okay! Do u have any idea how much it wld cost & which shop wld u guys recommend?

[khidd]

guys i pretty confused between full service and top service.. is it the same thing ?

 

my bike i think never had went thru an overhaul for its whole entire life of 12 years.. it was only passed on to me last year as my uncle didnt even utilize it at all for several years.. but strangely enough the engine still runs well ( i guess to me la.)

 

erm so my question is do i really need to overhaul it or just do full service? can any expert enlighten me?

[ucie]

to restore back rxz to its stock state..How much does it cost?

[lagwagon]

to restore back rxz to its stock state..How much does it cost?

 

that depends wat needs to be changed.. if u'r talking abt getting a new engine, heard frm a friend that it'll cost RM1500 at JB..

[lagwagon]

ok i got a question for the rxz professionals out here..

 

my bike has this rattling noise in the engine.. I've went for full service recently and the mechanic says that it's due to an oversized block, i'm currently using piston size 1.5 which is way bigger than the default piston size.. a friend of mine says that it has something to do with the conrod.. anyone can advice me on this one?

[wantongkol07]

I went to service my carb @ Hou Heng Motors last nite.

They did a gd job. Bike is running smoothly now.

But while the mech was revving my bike, i cld hear a loose ringing sound

coming from my block. The mech mentioned dat my piston ring

is loose but i still can ride la.

 

1. Is there any disadvantages on the long run?

2. Must i change the piston ring alone or more major stuffs?

 

This bike was given to me by my uncle who rode this bike

as a means of transport for e past 8 years as the 1st owner.

Jus wanna get more info from the RXZ 'professionals' here.

Tks!

 

bro, u go hou heng which one? gemok or the lil bro? maybe u can go back the shop go change piston and rings? better ask for all ori including gaskets.

[SamPiong]

HI.

 

Any1 noes bout dis?..im changing my rear sprocket to 42..wat size

should i use 4 da front?15 or 16?