BBDC - Anyone Taking 2B There?

[arah_tujuan]

Originally posted by EeYoRe_159@Jul 11 2006, 10:36 AM

MonoWorld, ytd I was rushing off.. actually did wait for u in the office for about 5 mins.. but till 9:35pm, still can't get to see u so I went off liao..

maybe wed, we will have chance to meet up again..

U-turn, tried before when doing RC.. very difficult Leg keep coming down when doing U-Turn..

The new 2B bike very powerful sia.. but I always can't get the biting pt when moving off, that why the engine keep on stalling.. the lady who is behind me told me to throttle more when moving off.. I did tried but the bike will go very fast when moving off, scared sia

hey my fren use de new bike at bbdc... he say its quite powerfull... de biting point is so damn fast wen u open up the throttle... in de end he fell dwn wen he was juz moving off coz he thought de biting point is de same as the old bike....

[EeYoRe_159]

Originally posted by arah_tujuan@Jul 11 2006, 10:38 AM

haiz...... yestd failed my TP.... heartbreaking sia:cry: .... my nxt TP on 7 aug.... Hope u all pray 4 me k.....

try again.. u can make it de.. :goodluck:

will for u..

[EeYoRe_159]

Originally posted by arah_tujuan@Jul 11 2006, 10:48 AM

hey my fren use de new bike at bbdc... he say its quite powerfull... de biting point is so damn fast wen u open up the throttle... in de end he fell dwn wen he was juz moving off coz he thought de biting point is de same as the old bike....

the biting is totally different from the old bike..

Your fren shd release the biting pt slowly as we have never try on the new bike before will never know what will happen de..

ytd, when I exchange bike with instructor, he told me not to drop the bike hor.. so scared that I will drop the bike, think if I drop the bike.. he sure to scream at me de..

[Roadrunner71]

Originally posted by MonoWorld@Jul 11 2006, 10:14 AM

haha wed i session 7 for the 7.01

failed the u-turn. wobbled. lot of ppl said the u-turn is a killer practical and TP.

I think the main problem when doing the u-turn is that we tend to look down at the front wheel or slightly in front of the front wheel to ensure that we turn into the centre of the middle lane. But this habit will almost certainly result in wide turning, wobbling or both.

 

So the key is to look ahead at where u wanna go - just like when doing the S-course and crank course, when making turns and when negotiating bends. Also not forgetting ur slow speed control - if on 1st gear, half-clutch/maintain throttle; if on 2nd gear, maintain throttle and apply little rear brake if too fast.

 

[Avarice]

Originally posted by EeYoRe_159@Jul 11 2006, 10:05 AM

huh, easy.. Failed my 6.01 ytd nite..

almost hit curb when doing slight cornering, speed to fast liao.. the place is so dark, can't even see clearly.. also kena penalize by instructor for not controling the speed..

My lane change, blind spot, not alert at pedestrian crossing, signal never off, engine keep on stall.. Got so many mistakes

The bike that I choose also jialat, end up got to exchange bike with instructor.. I got to ride the new 2B bike.. Not familiar with the bike that cos the engine stall a few times..

Never mind, will take on wed session 8..

wah piang... sounds like u had a crazy session sia.. dun feel too down! 6.01 first road lesson.. furthermore your's is at nite lei.. think its the shitty bike lor.. when i get shitty bikes my lessons become very chui one... coz get very kan cheong abt the damn bike

woah u managed to sit the new bike!! haha..

jia youz!! i'll prob see u on wed after my session 7!!

[Roadrunner71]

Originally posted by arah_tujuan@Jul 11 2006, 10:38 AM

haiz...... yestd failed my TP.... heartbreaking sia:cry: .... my nxt TP on 7 aug.... Hope u all pray 4 me k.....

Bro, my test was yesterday too. Even tho I passed (thank God), I understand exactly how u feel. I failed my 1st TP practical test too when taking my Cl3 exactly 3 yrs ago. All the best for ur re-test!

[EeYoRe_159]

Originally posted by Avarice@Jul 11 2006, 01:35 PM

wah piang... sounds like u had a crazy session sia.. dun feel too down! 6.01 first road lesson.. furthermore your's is at nite lei.. think its the shitty bike lor.. when i get shitty bikes my lessons become very chui one... coz get very kan cheong abt the damn bike

woah u managed to sit the new bike!! haha..

jia youz!! i'll prob see u on wed after my session 7!!

ya.. ytd was a crazy ride for me..

 

then furthermore got a stupid bike, kick all the way to first gear after that realise the gear still remain in 2nd gear..

This bike really give me a lot of problem.. No choice but to tell instructor, so he decided to exchange bike with me..

 

Got a new bike but dunno how to ride, engine keep on stalling.. Instructor then say me.. why so kan cheong, slowly lah..

 

Hope to see u too..

[kahhwee]

Originally posted by .Hack@Jul 11 2006, 09:21 AM

Warm up?

yalor. Put yr leg in front and count from 1 2 3 4 5 6 7 8. i always cum late so that i no need to do.

[kahhwee]

Originally posted by EeYoRe_159@Jul 11 2006, 10:05 AM

huh, easy.. Failed my 6.01 ytd nite..

almost hit curb when doing slight cornering, speed to fast liao.. the place is so dark, can't even see clearly.. also kena penalize by instructor for not controling the speed..

My lane change, blind spot, not alert at pedestrian crossing, signal never off, engine keep on stall.. Got so many mistakes

The bike that I choose also jialat, end up got to exchange bike with instructor.. I got to ride the new 2B bike.. Not familiar with the bike that cos the engine stall a few times..

Never mind, will take on wed session 8..

hmm. First time on the rd also like that one. second time wise should be ok liao le la.

[kahhwee]

Originally posted by EeYoRe_159@Jul 11 2006, 10:19 AM

drop bike at plank, cos never throttle enough.. kahhwee, am i rite..

Actually narrow plank is my fav subject, what I do is hold half clutch, hold on to throttle & step lightly on rear brake.. This is what I always do, can help me to get more than 7 sec..

Never mind, try again.. last time i also very lousy with my plank de

when u not enough throttle, bike will wobble cos speed too slow liao le. Must learn how to control the bike properly lor. So mabel, u r kinda right.

[kahhwee]

Originally posted by EeYoRe_159@Jul 11 2006, 10:36 AM

MonoWorld, ytd I was rushing off.. actually did wait for u in the office for about 5 mins.. but till 9:35pm, still can't get to see u so I went off liao..

maybe wed, we will have chance to meet up again..

U-turn, tried before when doing RC.. very difficult Leg keep coming down when doing U-Turn..

The new 2B bike very powerful sia.. but I always can't get the biting pt when moving off, that why the engine keep on stalling.. the lady who is behind me told me to throttle more when moving off.. I did tried but the bike will go very fast when moving off, scared sia

new bike? wad model?

[EeYoRe_159]

Originally posted by kahhwee@Jul 11 2006, 04:10 PM

new bike? wad model?

haha.. can't see the model.. Only know FBA 6706..

Think not for student de, cos no number stated on the bike.. I mean bike number, not talk about number plate..

[EeYoRe_159]

Originally posted by kahhwee@Jul 11 2006, 04:05 PM

when u not enough throttle, bike will wobble cos speed too slow liao le. Must learn how to control the bike properly lor. So mabel, u r kinda right.

haha.. so worried that I will give her the wrong info..

[EeYoRe_159]

Originally posted by kahhwee@Jul 11 2006, 04:02 PM

hmm. First time on the rd also like that one. second time wise should be ok liao le la.

hope so too..

ytd lesson, 1 of the student go missing.. Altogether 8 of us include 2 instructors, but later only left with 7 of us nia.. dunno where the guy go, how come he will go missing de..

this wed session 8 is my 2nd time on the road.. hope everything will be smooth..

[.Hack]

Went for my practical lesson this morning then saw people taking class2a/2 TP test.. Anyone here took this morning?

[MonoWorld]

Originally posted by Avarice@Jul 11 2006, 01:35 PM

wah piang... sounds like u had a crazy session sia.. dun feel too down! 6.01 first road lesson.. furthermore your's is at nite lei.. think its the shitty bike lor.. when i get shitty bikes my lessons become very chui one... coz get very kan cheong abt the damn bike

woah u managed to sit the new bike!! haha..

jia youz!! i'll prob see u on wed after my session 7!!

tis wed u doing the 7.01 at session 7?

[MonoWorld]

Originally posted by Roadrunner71@Jul 11 2006, 01:30 PM

I think the main problem when doing the u-turn is that we tend to look down at the front wheel or slightly in front of the front wheel to ensure that we turn into the centre of the middle lane. But this habit will almost certainly result in wide turning, wobbling or both.

 

So the key is to look ahead at where u wanna go - just like when doing the S-course and crank course, when making turns and when negotiating bends. Also not forgetting ur slow speed control - if on 1st gear, half-clutch/maintain throttle; if on 2nd gear, maintain throttle and apply little rear brake if too fast.

 

Roadrunner71, thx for the useful info.

 

oh ya, the instructor said muz apply 60% rear brake and 20% front brake when doing the U-turn. I just don't understand y need to apply break when already too slow.

 

btw, are you going to buy Bajaj Pulsar?

[MonoWorld]

Originally posted by EeYoRe_159@Jul 11 2006, 10:36 AM

MonoWorld, ytd I was rushing off.. actually did wait for u in the office for about 5 mins.. but till 9:35pm, still can't get to see u so I went off liao..

maybe wed, we will have chance to meet up again..

U-turn, tried before when doing RC.. very difficult Leg keep coming down when doing U-Turn..

The new 2B bike very powerful sia.. but I always can't get the biting pt when moving off, that why the engine keep on stalling.. the lady who is behind me told me to throttle more when moving off.. I did tried but the bike will go very fast when moving off, scared sia

my apology, my timing was too bad. thanks to the shuttle bus lol..

so when i reached the motorcycle office, write down the tag no. on the book and the reporting slip, the instructor started to asked us to go out liao. hehe paiseh

 

tink i wanna try the new bike. i'll tell the instructor my bike got problem lol

 

hmm abt the biting point, try to "know" "where" is "it" when u r on the bike b4 instructors asked u to move off. should have plenty of time to do it. wad i always do is that, release clutch and throttle quick, the bike will move and won't stall. maybe i m wrong hehehehe.

[EeYoRe_159]

Originally posted by MonoWorld@Jul 11 2006, 05:15 PM

my apology, my timing was too bad. thanks to the shuttle bus lol..

so when i reached the motorcycle office, write down the tag no. on the book and the reporting slip, the instructor started to asked us to go out liao. hehe paiseh

 

tink i wanna try the new bike. i'll tell the instructor my bike got problem lol

 

hmm abt the biting point, try to "know" "where" is "it" when u r on the bike b4 instructors asked u to move off. should have plenty of time to do it. wad i always do is that, release clutch and throttle quick, the bike will move and won't stall. maybe i m wrong hehehehe.

no wonder lah, wait & wait but still no sign of u.. then pple start giving me strange look cos I keep staring at them, as I have never seen u before beside MSN.. so must look carefully to confirm..

 

I did that too.. what happened is my body will move backward.. think I throttle too much liao..

[.Hack]

Originally posted by EeYoRe_159@Jul 11 2006, 06:15 PM

no wonder lah, wait & wait but still no sign of u.. then pple start giving me strange look cos I keep staring at them, as I have never seen u before beside MSN.. so must look carefully to confirm..

 

I did that too.. what happened is my body will move backward.. think I throttle too much liao..

Next time just throttle abit first, then slowly release your clutch till you feel the bike moving forward.. Then slowly increase the throttle and at the same time release your clutch.. Hope this help..

[Roadrunner71]

Originally posted by kahhwee@Jul 11 2006, 04:10 PM

new bike? wad model?

Aiya, wat else?

 

Still Honda CG125 lor!

[kahhwee]

Originally posted by EeYoRe_159@Jul 11 2006, 04:17 PM

haha.. can't see the model.. Only know FBA 6706..

Think not for student de, cos no number stated on the bike.. I mean bike number, not talk about number plate..

Orh. i tot for students one. Like that go back defensive riding time no need to ride cg 125 liao. The power ah, shake head.

[kahhwee]

Originally posted by EeYoRe_159@Jul 11 2006, 04:31 PM

hope so too..

ytd lesson, 1 of the student go missing.. Altogether 8 of us include 2 instructors, but later only left with 7 of us nia.. dunno where the guy go, how come he will go missing de..

this wed session 8 is my 2nd time on the road.. hope everything will be smooth..

u Sure there are 8 people when u set off? Just kidding la. Hmm. first time sure will blur blur one. After awhile u would be used to the pace of the rd users outside. Very fast right?

[EeYoRe_159]

Originally posted by .Hack@Jul 11 2006, 06:33 PM

Next time just throttle abit first, then slowly release your clutch till you feel the bike moving forward.. Then slowly increase the throttle and at the same time release your clutch.. Hope this help..

haha.. it help de.. but this bike hor.. dunno I think the clutch is quite tied so whether i tried to release the clutch, the bike stall liao..

[.Hack]

Originally posted by EeYoRe_159@Jul 11 2006, 09:51 PM

haha.. it help de.. but this bike hor.. dunno I think the clutch is quite tied so whether i tried to release the clutch, the bike stall liao..

Like that you can try to throttle abit more..