[Group] SBF WaveRider

[NightPhantom]

Hi all,

 

Wave 125X user here.. can anyone tell me the function of the 'brake stopper arm' ah? the bolt+cotter pin attaching it to the bike got lost, luckily the mech pointed it out to me.

 

thanks.

 

no idea what is this. sorry.

[squarebox]

Hi all,

 

Wave 125X user here.. can anyone tell me the function of the 'brake stopper arm' ah? the bolt+cotter pin attaching it to the bike got lost, luckily the mech pointed it out to me.

 

thanks.

 

brake stopper arm is the metal bracket that holds ur drum brakes and preventing it from spinning freely.

google is ur best friend!

Edited October 6, 2009 by squarebox

[squarebox]

Wave X is the latest - analogue.

Pre 2002 Wave S - digital, after 2002 Wave S (like FW plates all analogue).

 

I bought my wave registered and also manufactured in 2008 first hand which has digital odometer and fuel gauge.

[patricklow2001]

Hi MUSHA, could you advice me where or how much to solve this slipping cluth cover/housing? I bougth from my ex colleague. He is changing to Car.

[patricklow2001]

Hi All, Do you all have Honda Wave 125S manual?

[MUSHA]

i was quite lucky my disc was still okay... i was dumb lar... then was on my sp... rode it @ track for like almost 15 times = 15hours.... of coz brake pad sure wear out veri fast. plus i was using ebc....

 

then i thinkin how come got the screenching sound.... lucky didnt crash or anything.... i doubt there are ebc for our bikes rite..?

 

U really very lucky sia...

[MUSHA]

Hi all,

 

Wave 125X user here.. can anyone tell me the function of the 'brake stopper arm' ah? the bolt+cotter pin attaching it to the bike got lost, luckily the mech pointed it out to me.

 

thanks.

 

That means u are without rear brake all this while?

[MUSHA]

I bought my wave registered and also manufactured in 2008 first hand which has digital odometer and fuel gauge.

 

I m confused by the models of Wave... Well anyway, they are all good Waves.

 

But digital odo got one disadvantage is the odo will stuck at 99999.9km, analogue will jump to 00000.0. Is this still rite?

[MUSHA]

Hi MUSHA, could you advice me where or how much to solve this slipping cluth cover/housing? I bougth from my ex colleague. He is changing to Car.

 

My mech says change new ones, approx $180-200 parts n labour.

But i didn't change bcoz he says i no need to change as i only travel like 10km in a day.

[MUSHA]

Hi All, Do you all have Honda Wave 125S manual?

 

Doubt that if anyone here has it...

I always wonder the previous owner(s) keep the manual where? How come not in the bike? When they sell bike, they keep the manual also no use wat??!

[NightPhantom]

My mech says change new ones, approx $180-200 parts n labour.

But i didn't change bcoz he says i no need to change as i only travel like 10km in a day.

 

actually patrick problem seems like only need to change the clutch plate... he can probably get it done for 60rm in malaysia...

[NightPhantom]

Doubt that if anyone here has it...

I always wonder the previous owner(s) keep the manual where? How come not in the bike? When they sell bike, they keep the manual also no use wat??!

 

they probably want to sell at garage sale... but nobody would wanna buy... so its probably somewhere deep in their storeroom....

[MUSHA]

actually patrick problem seems like only need to change the clutch plate... he can probably get it done for 60rm in malaysia...

 

If clutch plate problem, the clutch will not even engaged properly. For me, it engaged properly but jerks in a slippery manner whilst on 2nd gear. Clutch plates on kups are seldom the problem. But for 60RM can give it a try 1st la. Patrick, let us know if changing clutch solved the problem.

[MUSHA]

they probably want to sell at garage sale... but nobody would wanna buy... so its probably somewhere deep in their storeroom....

 

Maybe they use as toilet paper in case of emergency esp up the NSHW...

[NightPhantom]

If clutch plate problem, the clutch will not even engaged properly. For me, it engaged properly but jerks in a slippery manner whilst on 2nd gear. Clutch plates on kups are seldom the problem. But for 60RM can give it a try 1st la. Patrick, let us know if changing clutch solved the problem.

 

"2) when change to 3rd gear and immediately accelerate, the motor not moving. Must wait awhile than accelerate.

Thanks."

 

 

oh darn, i read wrongly abt his initial post.... my bad.... motor not moving.... bike not moving or motor not moving????

 

actually clutch wear quite often among crazy riders... my previous owner probably crazy...

[MUSHA]

"2) when change to 3rd gear and immediately accelerate, the motor not moving. Must wait awhile than accelerate.

Thanks."

 

 

oh darn, i read wrongly abt his initial post.... my bad.... motor not moving.... bike not moving or motor not moving????

 

actually clutch wear quite often among crazy riders... my previous owner probably crazy...

 

It's ok, man... i sometimes also "old flower" eyes.

 

Until my next oil change (maybe a year later), i am not stripping the clutch housing yet. For now, still can use ba...

[patricklow2001]

Thanks Guy,

 

Normally the 3rd gear reach 60km/h the motor start to vibrate and the speed does not increase a lot ( a bit only 62km/h), after change to 4th gear than it start increase speed to 80km/h.

 

Anyway, i will change the cluth first. update you guy once change.

[patricklow2001]

Hi Guys, could advice brand of tyre to change? and how much?

[NightPhantom]

for grippy tires, i like bt39.... i think its the most expensive also....

 

Bridgestone Battlax BT39 80/90-17 90/80-17 $188.00 (unique motorshop)

 

actually i think u shld ask ur mech abt ur problem. coz it really doesnt seem like clutch slip to me after u describe it.....

 

clutch slip is when RPM increases/ engine REVVING UPP.... but e bike not accelerating much... so probably u try and feel it urself.... all the best! (hope no need to spend too much $)

[patricklow2001]

Thanks NightPhantom. Will let the mech check first.

[katdawg]

any1 noe how to open up honda wave seat?

 

open up? you mean to access the under seat compartment? if so, put your keys into keyhole, same as the one for ignition, and turn to "SEAT", mine's on the left side of "ON" (idk if all wave same). then push it in- you will hear a click sound. your seat is unlocked and now you can lift the seat up. i hope this helps

[NightPhantom]

RELEASE THE GEAR SHIFTER SLOWLY INSTEAD OF INSTANTLY TO MINIMIZE THE JERKING-

 

FOR STOPPING-JUST STOP AT ANY GEAR 2,3,4...AFTER WHICH THEN YOU CAN GEAR DOWN BACK TO 1-

 

 

 

just before u let ur clutch engage after u downshift, u can blip the throttle to match the engine speed, it would reduce the sudden jerk.... that is if u wanna downshift at a higher rev.... yep.

[smallbug]

That means u are without rear brake all this while?

 

Hahaha.. nothing so serious dude... just that the arm just 'hung in there' without any bolt+cotter pin.

 

I had already tried googling the function.. couldn't get it .. sorry ah. thanks for answer, guys.

[squarebox]

Hi All, Do you all have Honda Wave 125S manual?

 

I have Wave S 125 bike manual.

[smallbug]

Service manual, or owner manual?