Woopa!! Cbr1000rr Riders

[DenverDino]

hey guys, getting a cbr 1000 soon need to know more about the bike can anyone enlight me? like what's the main thing i have to do after i get the bike etc etc, cause i'm jumping from class 2b to 2 thank for ur help!!!

 

First day when collecting your bike must carefully go round to see got any scratches or anything damage.

 

Then second thing is for your run in... This all have to depend yourself to judge liao. Going for a hard or soft run in. If you want soft then you must remain your RPM below 4k...if you choose a hard one...then you dont have to worry just whack the barger.

 

3rd thing to take care is engine oil. According to Boon Siew oil change methods is first 800km, 2nd 4000km and 3rd is at 8000km. if you dont care about Boon Siew then u go for 1st 500km, 2nd 1500km and 3rd is 3000km...complete. If you want kiasu abit then run until 5000km. About 2000km you can start to whack your bike liao.... cheong ya.....

 

Last i think is tyre liao. Front 250kpa/ 36psi and rear 290kpa/ 42psi. Try to make it a habit...2 tank petrol pump 1 time tyre.

[Saufi]

First day when collecting your bike must carefully go round to see got any scratches or anything damage.

 

Then second thing is for your run in... This all have to depend yourself to judge liao. Going for a hard or soft run in. If you want soft then you must remain your RPM below 4k...if you choose a hard one...then you dont have to worry just whack the barger.

 

3rd thing to take care is engine oil. According to Boon Siew oil change methods is first 800km, 2nd 4000km and 3rd is at 8000km. if you dont care about Boon Siew then u go for 1st 500km, 2nd 1500km and 3rd is 3000km...complete. If you want kiasu abit then run until 5000km. About 2000km you can start to whack your bike liao.... cheong ya.....

 

Last i think is tyre liao. Front 250kpa/ 36psi and rear 290kpa/ 42psi. Try to make it a habit...2 tank petrol pump 1 time tyre.

 

 

 

The tyre pressure seems high,...

Is the new blade rimz different from the older bladez,...??

My '04 front 32psi,...

Back 36psi,...

[tantan1]

Hi fellow bladers,

 

where is the best place to get the CBR1000 2008 model?

Looking at the place that's selling the cheapest. I've checked with Looi's and Mah motor so far, but Mah has no more stock.

And for those who are riding it now. Where did you get yours from?

Any help/suggestions greatly appreciated.

 

Thx in advance.

Edited March 15, 2009 by tantan1

[d3an_cain]

http://www.minineopet.com/ebay%20picture/bike/49043_2008_honda_cbr1000rr_red.jpg

 

Fancy a scale model of the blade...

[DenverDino]

The tyre pressure seems high,...

Is the new blade rimz different from the older bladez,...??

My '04 front 32psi,...

Back 36psi,...

 

But i learn follow the manual book one...not i say de.

[DenverDino]

sorry...double posting

[DenverDino]

Hi fellow bladers,

 

where is the best place to get the CBR1000 2008 model?

Looking at the place that's selling the cheapest. I've checked with Looi's and Mah motor so far, but Mah has no more stock.

And for those who are riding it now. Where did you get yours from?

Any help/suggestions greatly appreciated.

 

Thx in advance.

 

The reason i choose Loois because they finance dont have any early settlement penalty or any fun stuffs. And his CBR is warranty by Boon Siew. So far i asking all around in Bukit Merah bike shop all got this early settlement penalty. Cause my 1st bike kana $500 penalty for early settlement so why choose those problematic shop leh. Some shop their penalty is more even higher. So you take note on this...dont take their word unless everything state in the agreement form.

[kinwei]

Hi fellow bladers,

 

where is the best place to get the CBR1000 2008 model?

Looking at the place that's selling the cheapest. I've checked with Looi's and Mah motor so far, but Mah has no more stock.

And for those who are riding it now. Where did you get yours from?

Any help/suggestions greatly appreciated.

 

Thx in advance.

 

I keep seeing a new white/black '08 CBR at Bike Production. You may want to ask them. Anyway I got mine from them. But you have to check with them if the one you are getting is the Boon Siew model or not. Cause they mentioned they will bring PI model to curb the increase in price. As for price wise, just to take note, they will quote you based on,

 

1) 900+ coe bidding price. If increase in coe, you top up, if not they refund you. But judging from recent coe, most likely you'll have to top up.

2) Exclude IU which u have to add in another 150+

3) Exclude the "admin" fee which you have to top up another 400

4) Supposed to be no early settlement but if you sell your bike to another bike shop, somehow they will charge the bike shop some amount, normally 300, which in the end it will pass on to you.

 

If you wanna buy from them, you got to add in all these costs. Another shop you can try is Everbright. My friend got his CBR there for only 2% interest. But dunno if there is any hidden cost or not. Btw they sell PI model.

[Jonest]

plan to sell my scorpion slip on....want to try yoshi rs5....

its for 06-07 cbr1k....some one interested please pm me.....thanks

 

Hi Pal, im interested in your scorpion exhaust pipe, can feed me with details, my service mobile is 97474257.

[Jonest]

Hi Bladders Of Millenium,

Anybody interested to meet up for some rounding & gathering session this coming friday...

 

Venue & Timing can be discussed...

 

So far, this are the awesome blader;

 

Jonest

Tashi

Denver Dino

 

Hope to hear from you guys soon...

 

Rgds'

Edited March 15, 2009 by Jonest

[Tashi]

The tyre pressure seems high,...

Is the new blade rimz different from the older bladez,...??

My '04 front 32psi,...

Back 36psi,...

 

RR8's rims are lighter than the previous year models.

 

Manual says 250f/290r actually, but when the bike is out from shop from the 1st day or even when changing to a new set of tyres, I would put 230f/260r.

 

One thing to note is that, sometime the air pump from petrol stations not properly calibrated, once I was 30kpa off, imagine pump at 250f/290r, and 280f/320r actually went in. Bike was sliding around.

[Tashi]

Hi fellow bladers,

 

where is the best place to get the CBR1000 2008 model?

Looking at the place that's selling the cheapest. I've checked with Looi's and Mah motor so far, but Mah has no more stock.

And for those who are riding it now. Where did you get yours from?

Any help/suggestions greatly appreciated.

 

Thx in advance.

 

I bought at Looi's. 08 models are going quickly, better hurry.

[Tashi]

Hi Bladders Of Millenium,

Anybody interested to meet up for some rounding & gathering session this coming friday...

 

Venue & Time can be discussed... Important is sincerity..

 

Hope to hear from you guys soon...

 

Rgds'

 

Fri evening I am ok.

[DenverDino]

I bought at Looi's. 08 models are going quickly, better hurry.

 

Hahaha... Loois kakis. Dont worry Mr Lee still got left for RR8.

[DenverDino]

Hi Pal, im interested in your scorpion exhaust pipe, can feed me with details, my service mobile is 97474257.

 

Look for Motrax...they bring in Scorpion. Email him at motovation-accessory.com.sg

Edited March 15, 2009 by DenverDino

[DenverDino]

Hi Bladders Of Millenium,

Anybody interested to meet up for some rounding & gathering session this coming friday...

 

Venue & Time can be discussed... Important is sincerity..

 

Hope to hear from you guys soon...

 

Rgds'

 

Give us the venue n timing lor. hopefully is on the center.

[Jonest]

Give us the venue n timing lor. hopefully is on the center.

 

Sure, no problem..

is Kallang KFC okie with you guys...

[DenverDino]

Sure, no problem..

is Kallang KFC okie with you guys...

 

I no problem...if you want to plan on friday then u better check on GSR thread see they got any outing out there. They like to meet on friday at KKFC.

[DenverDino]

RR8's rims are lighter than the previous year models.

 

Manual says 250f/290r actually, but when the bike is out from shop from the 1st day or even when changing to a new set of tyres, I would put 230f/260r.

 

One thing to note is that, sometime the air pump from petrol stations not properly calibrated, once I was 30kpa off, imagine pump at 250f/290r, and 280f/320r actually went in. Bike was sliding around.

 

buy a pressure gauge to to read lor...i alway read by that. very small n easy to keep.

[Shark]

Some break in secrets... Posted here a few years back... Reposted again by me

 

http://mototuneusa.com/break_in_secrets.htm

[tantan1]

The reason i choose Loois because they finance dont have any early settlement penalty or any fun stuffs. And his CBR is warranty by Boon Siew. So far i asking all around in Bukit Merah bike shop all got this early settlement penalty. Cause my 1st bike kana $500 penalty for early settlement so why choose those problematic shop leh. Some shop their penalty is more even higher. So you take note on this...dont take their word unless everything state in the agreement form.

 

Thx bro.

ya, i had a good chat with Mr Lee...he was complaining abt the high prices for the 2009 stock, and suggested that i get the 2008 before they sell out.

Ya, must get them to put everything down in black and white.

[tantan1]

I keep seeing a new white/black '08 CBR at Bike Production. You may want to ask them. Anyway I got mine from them. But you have to check with them if the one you are getting is the Boon Siew model or not. Cause they mentioned they will bring PI model to curb the increase in price. As for price wise, just to take note, they will quote you based on,

 

1) 900+ coe bidding price. If increase in coe, you top up, if not they refund you. But judging from recent coe, most likely you'll have to top up.

2) Exclude IU which u have to add in another 150+

3) Exclude the "admin" fee which you have to top up another 400

4) Supposed to be no early settlement but if you sell your bike to another bike shop, somehow they will charge the bike shop some amount, normally 300, which in the end it will pass on to you.

 

If you wanna buy from them, you got to add in all these costs. Another shop you can try is Everbright. My friend got his CBR there for only 2% interest. But dunno if there is any hidden cost or not. Btw they sell PI model.

 

 

Thx kinwei.

Wah i din know that Bike Production has so many 'layers' to pay ah. Good headsup bro.

Anyway, i think Boon siew bike will be better in case there're any recalls right? Much less hassles.

With these details, you are really making me very GIAN! Siao liao!

[tantan1]

I bought at Looi's. 08 models are going quickly, better hurry.

 

Wah... u got me into panic mode liao...

buy before all's gone! 2009 stock is ~30K siah!

[Tashi]

Some break in secrets... Posted here a few years back... Reposted again by me

 

http://mototuneusa.com/break_in_secrets.htm

 

Wah, must give you long time member award.

[Tashi]

Sure, no problem..

is Kallang KFC okie with you guys...

 

Kallang McD or Serene Center McD also can. No KFC for me, very oily, haha.

 

One of the best kept secret in McCafe is the Himalayan Tea.