[Discussion] Technical - Cosmetic Modifications

[KaT]

anione selling their predator face mask?pm me...thnks...

[elfian46]

Finally decided reversed my bike... :cheeky:

 

Today have started my renewal project, I have changed my headlight (spec 3 fake version) bought at the accessories shop and changed at their workshop total cost me $88 buck....Now the light n effect totally different..... the lightning is very sharp with the white bulbs effect ... :thumb:

 

Nxt renewal maybe speedometer or respray....

 

Anyone s4 rider can recommended bike shops to me?

 

bro which shop u go cos i wanna change my headlight too....

[Fazli]

Something I found on e-bay...

 

CB400 V-tec Carbon Tank Protector

CB400 Carbon Tank Protector

[ResmeN]

Hi guys,

 

Has anybody here changed their levers on their revo for an aftermarket set such as asv, lsl or pazzo, if so what model lever, where from and how much? I have been enquiring with motomummy who supply asv but they reckon they have nothing suitable for cb400 revo. I then asked if any other bikes levers would fit and they said not that they are aware of but surely another bikes levers should fit such as maybe a cb600?

 

I'm interested in a set of asv levers if they have one suitable for revo.

 

Thanks

[Fazli]

You can try looking at other Honda big bikes and see whether the brake master pump and clutch perch is similar to CB400. Then also take note of the pin size on the perch for a perfect match. Then order from motomummy for that particular bike. :)

 

I took a look at the Pazzo CB599/CB600 Hornet levers. The brake & clutch levers perch matches our CB400. You can try ordering the levers for that particular model.

Edited October 27, 2010 by Fazli

[ResmeN]

Fazli you have given me new hope. I will go to my mechanic and ask him if the controls of a CB600 are the same as CB400 and if so I will order away. I have also asked asv direct and I am waiting for a reply from their tech support guys.

[TheLOVEguru]

Dear Spec2 users,

I want to trade my fast Throttle Kit (incld handle switch) with original stock spec2 handle switch.

u just need to provide me new throttle cable and bare the workmanship cost. all Done at planet.

Can reach me at 97 51 07 97.

[Fazli]

Fazli you have given me new hope. I will go to my mechanic and ask him if the controls of a CB600 are the same as CB400 and if so I will order away. I have also asked asv direct and I am waiting for a reply from their tech support guys.

 

But do take note... If I'm not wrong ASV does not make brake levers for CB600 Hornet. Btw, just remeber its the older CB600 Hornet, not the new shorty exhaust model.

[scubasimon]

Anybody knows what is the windscreen/fairing they use on the cisco certis cb400 bikes? Looks big!

[ResmeN]

But do take note... If I'm not wrong ASV does not make brake levers for CB600 Hornet. Btw, just remeber its the older CB600 Hornet, not the new shorty exhaust model.

 

All good bro. I emailed asv direct and they replied back to with all details as below:

-------

Sorry we did not have this bike listed. This must be an Australian import model that is not sold in the US where we base all of our specs.

 

Difference between C/5 and F3 is as follows-

 

C/5 is CNC Machined from 6061 billet aluminum, shot peened before anodize to create a matte finish and has a 5 year guarantee.

 

F3 Series is forged from 2014 Aluminum and then polished before anodize for a gloss finish and has a 3 year guarantee.

 

Here are the part numbers for your bike:

 

C/5 Series: Brake BRC541 & Clutch: CRC510

 

F3 Series: Brake BRF341 & Clutch: CRF310

---------

 

For C/5 levers it would be 105 per lever and then 30 for shipping. This is in USD and for F3 series I think it would cost 80 per lever.

http://asvinventions.com/Applications/HondaSport.pdf

 

I'm still making inquiries with asv direct and also motomummy who seem to be the us dealer.

https://www.motomummy.com/store/home.php?cat=356&gclid=CI-Xhqfl-qQCFQEjbgodyTuxgw

[Fazli]

OK cool... Maybe my bad for not reading the site properly. But why ASV instead of Titax, Pazzo or CRG?

[kee.]

where to get nice affordable shrouds?

[Fazli]

I believe should be in the garage sale section. Give it a look and you might find something.

[ResmeN]

OK cool... Maybe my bad for not reading the site properly. But why ASV instead of Titax, Pazzo or CRG?

 

All good bro. My mechanic suggested asv and said they are more reliable and better than the others.

[zacko]

Hi Guys,

Need to ask a few questions on VerS which i plan to do up after not riding for some time.

 

-Side boards n tail already crack,can i use spec 1/2 sideboards and tail on VerS?

 

-How can i fix mainstand on my VerS some.What mods need to be done?

 

thanks in advance..........

[Fazli]

You can even fix up Spec 3 tail board but I find that it won't look so nice. Get back your original Ver S tailboards, go for a new paintjob (single color also will look nice). Main stand not sure if Ver S can fit up. Go for a new wire harness for your electricals. Will save you a lot of problems in time to come. Other than that, kepp it clean and shiny.

[hayy]

hello all,

 

where is the best place to do a package of a specIII tail, and respray of rims? im quite a perfectionist, so im kinda looking for the shop that does the best specIII tail for a spec1..

[epicflame37]

guys... i need sum feedback on the use of shrouds on ur super fours... heard alot of feedback saying engine will be hot.. bad for the engine.. stuff like dat.. but is it dat bad? alot of differences. hope to hear from ya all .. thanx

[Fazli]

You can try Yeow Spray. Heard good reviews and seen some of their paintwork on friends' bike. Good finish I must say.

[Fazli]

guys... i need sum feedback on the use of shrouds on ur super fours... heard alot of feedback saying engine will be hot.. bad for the engine.. stuff like dat.. but is it dat bad? alot of differences. hope to hear from ya all .. thanx

 

Shrouds... I'd rather you leave it naked and get radiator air scoops to replace the metal piece by the side of your radiator. Looks good and serves a purpose.

 

http://www.fz6-forum.com/forum/picture.php?albumid=925&pictureid=6187

[jack oh jack]

Shrouds... I'd rather you leave it naked and get radiator air scoops to replace the metal piece by the side of your radiator. Looks good and serves a purpose.

 

by any chance u noe where to gt them?

btw, i saw a few s4 with fairing covering the side of radiator plus belly pan all in one piece.. dun noe where they gt it..

[Fazli]

I did try once to just trial and put on the CBR400 fairings and they fit well. Just need to fine tune and mod the mountings to fix it up. They look gd. Just that I forgot to take pic.

[epicflame37]

by any chance u noe where to gt them?

btw, i saw a few s4 with fairing covering the side of radiator plus belly pan all in one piece.. dun noe where they gt it..

 

u mean side radiator n belly pan all in one? looks to me like its a full fairing on a naked bike... Den does the s4 becomes like a sports bike?

 

BTW Fazli.. any pics or idea where to get the radiator scoops ur talking about? coz this is the first time i heard about it.. and s4 in singapore using it? i always see acerbis shrouds onli on s4..

[Fazli]

I think SG might not have. Can try online shops and see if they carry. If holes don't match can just drill to fit lor.

[koxie]

Shrouds... I'd rather you leave it naked and get radiator air scoops to replace the metal piece by the side of your radiator. Looks good and serves a purpose.

 

http://www.fz6-forum.com/forum/picture.php?albumid=925&pictureid=6187

 

bro,they dont sell radiator air scoops for cb400 right?