Honda Shadow 400

[One Headlight]

may i know where u did your rejetting and how much does it cost? i've changed my rear tire n bearings... still feel some vibrations

 

Unfortunately, I'm here in the Philippines. And labor is very cheap here.

For sure, my mechanic installed bigger jets so the pipe can "breathe" easier.

[Guest chuinjie]

here comes a steed bro to disturb you shadow riders~ : )

joking...

guys~ im kinda bored with my broomstick handle and was wondering where i might get a set of risers and wide bars like you guys? (not joking about this~) oh, and whats the cost like?

 

regards,

chuinjie

[xam_77]

got a issue w my shadow slasher tt is bothering me pretty much... its vibrating hell lots while cruising and it dies off very often for the first 10mins or if i were to clutch in to let it roll... idiling too low? where to adjest it? does a hollow pipe cause vibration to the bike or isit just the wheel bearing needs replacement

 

try to warm up yr bike 3~5min before u ride, that should help with the dying. the vibrating and the idling is... idling cant be too low if yr vibration is high, u can tune yr idling to a sweet spot where u are comfortable with the vibration. low idling helps with FC abit. u save in the long run.

[xam_77]

http://sg.images.search.yahoo.com/images/view;_ylt=A0S0uD0UGzhPQgIA1sMl4gt.;_ylu=X3oDMTBlMTQ4cGxyBHNlYwNzcgRzbGsDaW1n?back=http%3A%2F%2Fsg.images.search.yahoo.com%2Fsearch%2Fimages%3F_adv_prop%3Dimage%26va%3Dhonda%2Bshadow%2B400%26fr%3Dyfp-t-712-s%26tab%3Dorganic%26ri%3D1&w=500&h=400&imgurl=img87.imageshack.us%2Fimg87%2F8299%2Fshadow400wg2.jpg&rurl=http%3A%2F%2Fwww.sulit.com.ph%2Findex.php%2Fview%2Bclassifieds%2Fid%2F466007%2FHonda%2BShadow%2B400&size=37.5+KB&name=Honda+Shadow+400+Philippines+-+466007&p=honda+shadow+400&oid=1a238dbfad3f291d11e92c267b5047f5&fr2=&fr=yfp-t-712-s&tt=Honda%2BShadow%2B400%2BPhilippines%2B-%2B466007&b=0&ni=21&no=1&tab=organic&ts=&sigr=12dulirek&sigb=13jpt4s5p&sigi=11f5hj34v&.crumb=YzmL45OFTrR

[kmjoe]

ya... didnt knew where the knob was... now no more engine dying but vibration still exist...

[jats1935]

Hi Anyone with experience of A good Paintjob done by Spraypaint shops in Singapore? For Honda shadow 400 with good quality paint and workmanship & artwork.

Tried One in Loyang - Very Dissapointed

 

Tried Yeow previously , job done by Huat excellent but he's no more there.

 

latest tried yeow again. dissapointed cause not properly done. got to redo , can u imagine...

I don't think this will happen if ah huat is there

 

Please Advise Thanks so much..

[Bikee]

Hi Anyone with experience of A good Paintjob done by Spraypaint shops in Singapore? For Honda shadow 400 with good quality paint and workmanship & artwork.

Tried One in Loyang - Very Dissapointed

 

Tried Yeow previously , job done by Huat excellent but he's no more there.

 

Hello John,

 

Yeow Motor or Ah Huat is now at :

 

Blk 14 Defu Lane 10 #01-400

 

81006969

latest tried yeow again. dissapointed cause not properly done. got to redo , can u imagine...

I don't think this will happen if ah huat is there

 

Please Advise Thanks so much..

[Bikee]

Hi Anyone with experience of A good Paintjob done by Spraypaint shops in Singapore? For Honda shadow 400 with good quality paint and workmanship & artwork.

Tried One in Loyang - Very Dissapointed

 

Tried Yeow previously , job done by Huat excellent but he's no more there.

 

Hello John,

 

Yeow Motor or Ah Huat is now at :

 

Blk 14 Defu Lane 10 #01-400

 

81006969

latest tried yeow again. dissapointed cause not properly done. got to redo , can u imagine...

I don't think this will happen if ah huat is there

 

Please Advise Thanks so much..

Edited February 13, 2012 by Bikee
Doube post

[jats1935]

Thanks bro for yr info on whereabouts of Ah Huat...

Is it also call yeow motor as well?

 

Thanks

 

Hi Anyone with experience of A good Paintjob done by Spraypaint shops in Singapore? For Honda shadow 400 with good quality paint and workmanship & artwork.

Tried One in Loyang - Very Dissapointed

 

Tried Yeow previously , job done by Huat excellent but he's no more there.

 

Hello John,

 

Yeow Motor or Ah Huat is now at :

 

Blk 14 Defu Lane 10 #01-400

 

81006969

latest tried yeow again. dissapointed cause not properly done. got to redo , can u imagine...

I don't think this will happen if ah huat is there

 

Please Advise Thanks so much..

[kmjoe]

found a big splatter of yellow liquid on the coolent container and some drips of yellowish liquid on the floor... coolent leak?

[One Headlight]

found a big splatter of yellow liquid on the coolent container and some drips of yellowish liquid on the floor... coolent leak?

 

Maybe or just an overflow. Advisable not to fill it to the brim so coolant has room to circulate.

[Cruiserian]

Bro you just service the coolent? I remember mine is green. Hehe. I don't think leaking, try check if the cap is closed properly. And yes, don't put it too full. Hope u enjoy the bike.

[Jonborah]

anyone knows where I can make a key if I lost one and don't have any spare?

[Cruiserian]

Bro you just service the coolent? I remember mine is green. Hehe. I don't think leaking, try check if the cap is closed properly. And yes, don't put it too full. Hope u enjoy the bike.

 

Ooops..see wrong post in my handphone..I tot it's John

[Cruiserian]

anyone knows where I can make a key if I lost one and don't have any spare?

 

Heard that the key shop next to LAB got magic to remake lost key (but not sure how true is it cuz I never witness before). Worst case have to change the whole ignition.

[Jonborah]

Heard that the key shop next to LAB got magic to remake lost key (but not sure how true is it cuz I never witness before). Worst case have to change the whole ignition.

 

done! went to the one beside regina!

[Cruiserian]

how did they do it?

[kmjoe]

found a big splatter of yellow liquid on the coolent container and some drips of yellowish liquid on the floor... coolent leak?

 

just to share with the shadow community, this issue was resolved... the problem was a broken thermostat causing the coolant to leak and turn the liquid in the container to become "mud like" below is a pic of how it look like... a skilled mech is require to do this job

 

http://i8.photobucket.com/albums/a20/kmjoe/IMG_0494.jpg

[micheal]

Hi Bros,

 

Need your assistance....

 

Anyone knw where can I get a batwing fairing?

Or anyone letting go? Pls contact me.

 

Thank you v much.

[Hydher]

how about the one on my signature? hehehe

[micheal]

how about the one on my signature? hehehe

 

Lol. On la. but yrs no Wing le

[Hydher]

kena chop off! Someone selling his shadow with a batwing at the garage. Try to offer.

[micheal]

Tks bro, red colour right?

The owner only wan to sell together with e bike

Sad...

[Jonborah]

guys need your help.

 

my bike feels a little wobbly. i don't know how to explain. but i've changed my steering cones, my tyres, spokes realignment, tightened triple tree, changed fork oil, checked rear suspension. but problem still persists. anything i may have missed out?

[Kman]

Did you check the spacers for the handle bar?

 

 

guys need your help.

 

my bike feels a little wobbly. i don't know how to explain. but i've changed my steering cones, my tyres, spokes realignment, tightened triple tree, changed fork oil, checked rear suspension. but problem still persists. anything i may have missed out?