Mito Riders

[Sols]

my mileage is about 280-310km... but i usually pump at 250km.. just incase... lol...

 

as for 2T... like never ever finish one... lol... use my bike for more than a year already, i've only bought like 4litres of 2T... i've calculated my 2T consumption... 1 litre 1500km+500km...

[amgm125]

Luckily my 2T sensors still worked. But no fuel gauge sensor. I think it's spolit since i bought my bike i never knew it existed at all. Been using my hands to weigh the thing once in a while. Got once the rubber clip on the edge of the tank snapped due to me weighing the tank by hand over the months.

[jonathan543]

or next time refuel liao then see hows ur fuel consumption, & work out when's 12l of fuel was used up lor. then c mileage when to go for refuel... really in a lan lan case... hahah...

wow... mine ard 1000km need to top up 2t oil liao eh, might be ur 2t pump was set too low? mine stock already dat high liao....

sols, ur fuel consumption blardy gd eh! my fuel tanks' capacity 12.5l, once hit 190+ and i left less than half liter in the tank

[Xenophobia07]

Ask you all ah, change the conrod bearing, roughly how much, including the workmanship to open up? And where to do it?

[Sols]

planet tank only 12.5 litres meh? mito is 14 litres mah... so can run more lor... lol...

 

last time better... now about 20km/l... so by 200-250 i will pump lor... then i reset the trip meter to 0... so i know when to pump...

 

last time 300++ still can see fuel in the tank...

 

i always keep my 2T full... every now and then i will top up... maybe once a month to once in 2 months i top up.. only a few hundred ml... weird hor...

[wan_xtc]

jeremy: bearings i think not that ex but labour is!

 

sols: wow u got like 280 till empty huh? mine can go 240 onli

[alanhim]

TRACK Session on 21st March (Tuesdays)

 

Meet up white card house at 8.00am . Moving off time will be 8.30am Sharp! Singapore time pls...!!

Pls put your name if you want to go.

 

1) Alan

2) Eyz

3) Daniel

4) Lawrence

5) Dannis (opt for 2hr session)

6)

[jonathan543]

Originally posted by Sols@Mar 18 2006, 06:55 PM

planet tank only 12.5 litres meh? mito is 14 litres mah... so can run more lor... lol...

 

last time better... now about 20km/l... so by 200-250 i will pump lor... then i reset the trip meter to 0... so i know when to pump...

 

last time 300++ still can see fuel in the tank...

 

i always keep my 2T full... every now and then i will top up... maybe once a month to once in 2 months i top up.. only a few hundred ml... weird hor...

very gd liao lor 20km/l... mine's 15km/l... dropping to 12-13km/l if i adjust the mixture richer.... think koz i'm using cone filter so fuel consumption dat high... might change back to airbox soon... think u can ask william to advice whether need to adjust 2t flow to be higher... koz no gd at all when travelling at high rpm wit low 2t intake....

and planet's full tank is indeed 12.5l... got one time travelled 190km+ then pump! heart was pounding as i searched for a petrol station... and got in 12.3l! heng ah... hahah... left 200ml oni....

[Sols]

lol... my 2T is ok leh... plug says that its abit rich... exhaust says the same thing too... lol...

[Xenophobia07]

Originally posted by wan_xtc@Mar 18 2006, 08:48 PM

jeremy: bearings i think not that ex but labour is!

 

sols: wow u got like 280 till empty huh? mine can go 240 onli

Because open up to change, must change the gasket already right? Or something like that. So less than $300 just to change conrod bearing?

[jinhanz]

xeno why u wanan change conrod bearings? if i am not wrong u need to change the conrod together if the conrod is loose and including the gasket and also labour for taking out the block. it will not be cheap liaoz.

[Sols]

conrod bearing can change without conrod...

 

but.. unless its super chui, its not gonna be worth it... have to rip the entire engine open just to change the bearing...

 

meaning new gaskets as jinhanz has mentioned and lots and lots and lots of manhours...

[StingRhea]

i would suggest that when u open the engine, try to change as many things as possible. u dun wan to open it again dont u?

[DESMOSEDICI]

Originally posted by Sols@Mar 19 2006, 07:19 PM

conrod bearing can change without conrod...

 

but.. unless its super chui, its not gonna be worth it... have to rip the entire engine open just to change the bearing...

 

meaning new gaskets as jinhanz has mentioned and lots and lots and lots of manhours...

hey kukujiao.. whens ya comissioning? =D which camp?

[Xenophobia07]

I thought maybe just change, because its about 5 years. Wear and Tear coming about soon. Was just considering doing up the bike.

[duriandan]

Been riding my Mito for 2 weeks now.

 

Seeking enlightenment from Mito-Gurus...

 

 

Mito-Mystery One:

My mirror keeps on dropping off in mid-ride!

I checked the mirror and found that it's not screwed-on but instead just pushed into the the fairing with 2 scrawny little attachments.

Is it supposed to be this way or am I missing a screw?

 

Mito Mystery Two:

I accidentally rode over a hump at high-speed and now I can hear something rattling when I'm riding, anybody has a clue what's wrong or what's come loose and bumping around in the body?

 

Mito Mystery Three:

I keep stalling at junctions when I start from 1st gear.

A friend told me it's because my fuel injector and caburetor's dirty and needs to be cleaned.

Any idea if that's the real problem, and how much it'll cost?

 

 

Mito-Newbie thanks Mito-Gurus in advance.

 

Cagiva!

[Sols]

1) Yes there should be a screw... but the screw is very pathetic... the thing that holds the screw down breaks like nobody's business... the 2 scrawny things are supposed to be very tight... ask your mech to adjust for you... its supposed to clip on damn tight one...

 

2) Hmmm.... Donno...

 

3) Donno... But if your carb is dirty, its not ex to clean...

[duriandan]

Originally posted by Sols@Mar 20 2006, 12:09 AM

1) Yes there should be a screw... but the screw is very pathetic... the thing that holds the screw down breaks like nobody's business... the 2 scrawny things are supposed to be very tight... ask your mech to adjust for you... its supposed to clip on damn tight one...

 

2) Hmmm.... Donno...

 

3) Donno... But if your carb is dirty, its not ex to clean...

How much do you pay to clean your carb?

 

What about your fuel injector?

 

Thanks for replying!

[Sols]

Originally posted by DESMOSEDICI@Mar 19 2006, 08:50 PM

hey kukujiao.. whens ya comissioning? =D which camp?

I;m the next commissioning batch! lol...

 

June 10th!! All go k... lol...

[Sols]

Mito got no fuel injector... lol...

 

Mito uses carb... i can't rem how much... but i should be doing it soon... within a week or 2... lol.. let you know after that.. hahaha... but then it'll be too late for you... haha...

 

i think someone here does it for $38...

[duriandan]

Originally posted by Sols@Mar 20 2006, 12:19 AM

Mito uses carb... i can't rem how much... but i should be doing it soon... within a week or 2... lol.. let you know after that.. hahaha... but then it'll be too late for you... haha...

You see a black Mito stalled at the side of the road in Yishun you know is who already...

[amgm125]

Originally posted by Xenophobia07@Mar 19 2006, 11:01 PM

I thought maybe just change, because its about 5 years. Wear and Tear coming about soon. Was just considering doing up the bike.

Me need to change piston rings soon, but still holding on to it. Waiting to do Top servicing, since the mech is stripping the engine , must well tong until then one shot do up all the wear and tear parts.

[amgm125]

Originally posted by duriandan@Mar 19 2006, 11:42 PM

Been riding my Mito for 2 weeks now.

 

Seeking enlightenment from Mito-Gurus...

 

 

Mito-Mystery One:

My mirror keeps on dropping off in mid-ride!

I checked the mirror and found that it's not screwed-on but instead just pushed into the the fairing with 2 scrawny little attachments.

Is it supposed to be this way or am I missing a screw?

 

Mito Mystery Two:

I accidentally rode over a hump at high-speed and now I can hear something rattling when I'm riding, anybody has a clue what's wrong or what's come loose and bumping around in the body?

 

Mito Mystery Three:

I keep stalling at junctions when I start from 1st gear.

A friend told me it's because my fuel injector and caburetor's dirty and needs to be cleaned.

Any idea if that's the real problem, and how much it'll cost?

 

 

Mito-Newbie thanks Mito-Gurus in advance.

 

Cagiva!

1. The mirror holder bracket is corroded, just like mine, it once came lose after i travelled past those speed regulating sripes. I ask the mech to drill a hole near the top of the mirror and insert a screw in place. A bit ugly but damn secure.

 

2. The Rattling sound could be the number plate behind. It always happen to me

 

3. It happened to me when i first got my bike too, the mech set my idling speed a little higher and problem solved. Sometimes you've to open throttle a bit and kick to first gear at the same time to avoid stalling.

 

Hope these helps

[wan_xtc]

Originally posted by duriandan@Mar 19 2006, 11:42 PM

Been riding my Mito for 2 weeks now.

 

Seeking enlightenment from Mito-Gurus...

 

 

Mito-Mystery One:

My mirror keeps on dropping off in mid-ride!

I checked the mirror and found that it's not screwed-on but instead just pushed into the the fairing with 2 scrawny little attachments.

Is it supposed to be this way or am I missing a screw?

 

Mito Mystery Two:

I accidentally rode over a hump at high-speed and now I can hear something rattling when I'm riding, anybody has a clue what's wrong or what's come loose and bumping around in the body?

 

Mito Mystery Three:

I keep stalling at junctions when I start from 1st gear.

A friend told me it's because my fuel injector and caburetor's dirty and needs to be cleaned.

Any idea if that's the real problem, and how much it'll cost?

 

 

Mito-Newbie thanks Mito-Gurus in advance.

 

Cagiva!

Mystery 3: For me, i need to slip the clutch a little to move off....

[Sols]

more updates on fuel consumption...

 

240km... 11.4litres.. lol...

 

if i know still got so much left i tomorrow afternoon then pump... kns... i though finishing liao... dowan to rush tomorrow morning... tonight pump first... lol...