Mito Riders

[kokhwee]

if i got time this few days to go jb and ride my bike back den i'll be going for the

May 1st outing.. my bike has been in jb since last september! im too lazy omg...

 

ur bike izzit the green mito ???

[pranzer]

wow last sept.. rly long holiday..

[tsm]

Since last year, excel cycle is not the dealer of cagiva. :-) just fyi.

 

What happen?

Who is the dealer now for cagiva?

[tsm]

hey guys...the bike headlight izzit can adjust ? bright or dimer? other then the low beam and high beam...

 

You can only adjust the height of the beam.

Usually we don't adjust that, else LTA cannot pass in the last stage.

[pranzer]

Isnt the dealer for cagiva now is Hong Seh?

[BlaqueWolf Racing]

Yeah...its Hong Seh Superbikes. Down at the Alexier building...Same showroom as the MV Agustas and Ferraris, Spykers, Maseratis and just beside a showroom with a H2 Hummer.

 

BWR

[kokhwee]

You can only adjust the height of the beam.

Usually we don't adjust that, else LTA cannot pass in the last stage.

 

so how do we adjust the height of the beam??

[kokhwee]

Yeah...its Hong Seh Superbikes. Down at the Alexier building...Same showroom as the MV Agustas and Ferraris, Spykers, Maseratis and just beside a showroom with a H2 Hummer.

 

BWR

 

they are the dealer for cagiva...but who is the agent where we can directly order the spare part??

[andrew687]

i not crazy yang lehh andrew piangz ehhh

 

outing ahh can ahh no problem must see others can anot... if not ah find one by one very kang kor

 

Ok Crazy Yang, will call you then...long time no meet up liao :cool:

[Adam Brody]

Hello everyone.

 

I just bought me the new MitoSP525 from Hong Seh Superbikes and I must say I got a fantastic deal from them. Will be using it for MSS purposes only and I am glad to say that this might be the first Mito on the grid in a sea full of Kawa Kips/TZMs and NSR SPs.

 

I hope that this will increase the level of awareness for the bike among bikers. Anyone else interested to run in the MSS, please do let me know and we can go and compete as a team.

 

Cheers!

 

BWR

 

bro juz wandering how much do u bought it?

[tsm]

so how do we adjust the height of the beam??

 

I'm not sure about the latest model.

For evo model, there is a hole between the front head light.

You can insert an allen key and turn to adjust high or low.

 

*note: shouldn't adjust unless LTA fail.

[alexlim]

Anyone have any place to recomend for service or overhaul mito? Around how much for a full service or Overhaul ?

[XYxCrOss]

O.O so whos coming along may 1st ? LOl less ppl den don have le horr hahahx its been a long long long time since we have more den 5 mitos tgt >

[tsm]

Anyone have any place to recomend for service or overhaul mito? Around how much for a full service or Overhaul ?

 

 

Mito needs to constantly service the exhaust valve.

Its so much better you learn to service yourself and decarbonised it using fine sand paper.

The rest like change spark plug and engine oil are easy.

 

Overhaul is a major job. Need to re-bore the cylinder head and new piston.

We can only bore the cylinder abt 3 times.

[pranzer]

so how do we adjust the height of the beam??

 

as what Goose said.. in front in between the lights.. there is an adjustor.. i read it somewhere in the workshop manual..

 

Oh xy i try and see what i can do to avoid the duty lmaos.. Hope to see you guys on the 1st *cross fingers*

[pranzer]

Gathering Supper .... May 1st.. 1030pm Kallang Mrt...

Pls Reg yourself less then 3ppl den cancel

 

1)Xiaoyang

2)Mythology (most probably going, long time no see everybody)

3)

4)

5)

 

 

Helping to remind everyone there is a outing this 1st May..

[witchblade]

Mito needs to constantly service the exhaust valve.

Its so much better you learn to service yourself and decarbonised it using fine sand paper.

The rest like change spark plug and engine oil are easy.

 

Overhaul is a major job. Need to re-bore the cylinder head and new piston.

We can only bore the cylinder abt 3 times.

 

I believe you do know that when u rebore, the material gets thinner and heat is produce at higher rate when you ride the bike. so becareful not to get the bike overheated.

[witchblade]

Hello everyone.

 

I just bought me the new MitoSP525 from Hong Seh Superbikes and I must say I got a fantastic deal from them. Will be using it for MSS purposes only and I am glad to say that this might be the first Mito on the grid in a sea full of Kawa Kips/TZMs and NSR SPs.

 

I hope that this will increase the level of awareness for the bike among bikers. Anyone else interested to run in the MSS, please do let me know and we can go and compete as a team.

 

Cheers!

 

BWR

 

hmm.. MSS.. lovely. only problem be time factor n cost factor.

[tsm]

I believe you do know that when u rebore, the material gets thinner and heat is produce at higher rate when you ride the bike. so becareful not to get the bike overheated.

 

No worry about material gets thinner and heat.

It is a standard for every engine to get re-bore not more than 3 times.

There is a specification for the bore amount and piston used for 1st time, 2nd time and 3rd time.

[BlaqueWolf Racing]

Adam - I got the bike at a good deal. $14500 comes with Gianelli Exhaust system and the rear swingarm stand for working on the bike at the track. This is because I will be using it for track purposes only. Dont know what others might get but thats the deal I got from Hong Seh. Excel quoted $15800 for stock bike. If any of you guys want to get the SP525, do let me know and I can try to get favourable deals for you too.

 

Witchblade - For those who wanna run in the MSS with me, I was thinking of going under my team name of BlaqueWolf Racing. I will sponsor the entry fees for each round of the MSS. But the bike must carry my team name. Its my effort to run a Privateer team in the MSS. Rider just has to have a bike that he/she is ready to race with. No need for massive mods...just good clean fun on a professional platform.

 

BlaqueWolf Cagiva Racing....

[corsa27]

hi. i'm a new mito rider who just got my mito. anyway. where can i get cheap offer for spark plugs? mine broke down .=\

[Krazio]

sorry guys just asking.. where can i get a mito 125 cheapest? and roughly how much will it cost? intending to get this bike after i get my license

[corsa27]

i think it's minerva.

[Krazio]

minerva? is that a shop or what?

[tsm]

minerva? is that a shop or what?

 

It is sole distributor for Ducati in Singapore.

In the past, they are Cagiva too but not anymore now.