Mito Riders

[Keng Gerard]

7k rpm to charge...ok. i will remember this. but that means in most singapore roads will have to ride in 2nd or 3rd gear man...teruk.

 

i usually ride between 5-6k rpm and with headlights on at low beam. i don't ride too fast. yesterday the battery was really flat until i can slot it inside my letterbox! this morning the volt meter says 12v (like one poster mentioned also) but i didn't wanna start because if it dies again then teruk. i'll start it up when i bring it to the shop. it is now running a dry cell battery.

 

where do you folks get your wet cell yuasa? the shop i was at didn't have it.

 

also...how to maintain at 7k rpm? i don't ride the bike often...will this pose a problem?

 

Hey hey.. Resolution is here. For you to whack till 7rpm - Simple, use either Gear 1 and Gear 2 @ straight Road. Drag till 11rpm can le. haha.. it will likely take 4 seconds overall. (",).

 

then if u wan to check ur batt, can go excel and check[Recommended by Me - Personal introduction]. Look for Ah Meng. He is able to help you. Say Gerard intro de.. (",)

[Keng Gerard]

anyway gerrard... how's ur bike? okay already? anyway where to get race fairing ar?

 

HAha.. internet lo.. Got sell Race Fairing. Ming Lai show me before..

hahaha..

[jacktkk]

yup... u can't.... our bike only will charge when ur rpm is at 7.... another words opened valve... that is one good thing... cause it will prevent ur valve from jamming itself from all the 2t n it will charge ur battery also...

 

Wow, 7k rpm. Really need to wack already.

 

Will try it out.

[Keng Gerard]

Yeah.. go Try go Try.. haha..

[Keng Gerard]

Friends inside here. If u need tow Truck, can give me a call. I only serve 2B bike @ a certain rate. So let me know.

hahaha..

 

If not match then nvm wor. Review only let u guys decide after try out. But certainly i would rather ur bike will stay healthy than kana tow. unlike mine, today got tow to shop for repair le. WHaha... sob

 

Keng Gerard

Have a nice Day..

[Sols]

i just got my 916 today... lol... when i was riding mito, every gear drag till 11-12k...

 

today ride the duke, all the way less than 5k... felt so weird... lol...

 

anyways, dry cell is supposed to charge faster than wet cell.

 

but sometimes you go to the shop you say you want dry cell, they actually give you maintenance free... which is basically the wet cell just that you cannot top up the water...

 

i was using yuasa maint free on my mito last time. lasted me many many years... i think its $90++ only... its a good investment...

[lailai85]

Hey hey.. Resolution is here. For you to whack till 7rpm - Simple, use either Gear 1 and Gear 2 @ straight Road. Drag till 11rpm can le. haha.. it will likely take 4 seconds overall. (",).

 

then if u wan to check ur batt, can go excel and check[Recommended by Me - Personal introduction]. Look for Ah Meng. He is able to help you. Say Gerard intro de.. (",)

 

sorry to add please best is dun wack at 1st gear unless u r racing with others..

u wont wan more wear n tear right..

check for rectifier n magneti coil. when ur bike is running it will start to charge juz tat when u wack till 7 rpm is give more power tat y is more charging.

when bike is running it will not use batt power but from the power which the magneti coil produce same goes to car too..

[lailai85]

i just got my 916 today... lol... when i was riding mito, every gear drag till 11-12k...

 

today ride the duke, all the way less than 5k... felt so weird... lol...

 

anyways, dry cell is supposed to charge faster than wet cell.

 

but sometimes you go to the shop you say you want dry cell, they actually give you maintenance free... which is basically the wet cell just that you cannot top up the water...

 

i was using yuasa maint free on my mito last time. lasted me many many years... i think its $90++ only... its a good investment...

 

wat sols say is true dry or wet have the same purpose. juz tat which wan u prefer.

wet cell u got to top up batt water when is low.

where else dry give u maintenance free problem..

yuasa is a trusted brand get make from japan.

if not now selling china n taiwan. get the taiwan if have too

price should b 90 n above..

[lailai85]

i support dry cell myself..

jus my suggestion...

[Keng Gerard]

Nice 1 Sols - 916.. haha.. Grats..

 

Lailai.. nice and good Advice.. We got master here to advice on the best usage in our Mito Bikes.. Take notice of them.. Nice of them.. (",)

[lailai85]

eh.... juz for info.

if is ur rectifier damage u can ask ah meng to mod super 4 rectifier to fix on mito..

better n cheap plus is a new rectifier.. (if happen u r going to excel which keng gerard recommended)

[lailai85]

Nice 1 Sols - 916.. haha.. Grats..

 

Lailai.. nice and good Advice.. We got master here to advice on the best usage in our Mito Bikes.. Take notice of them.. Nice of them.. (",)

 

didn't all this is u teaches me meh..

u so STM... rofl....

[lailai85]

7k rpm to charge...ok. i will remember this. but that means in most singapore roads will have to ride in 2nd or 3rd gear man...teruk.

 

i usually ride between 5-6k rpm and with headlights on at low beam. i don't ride too fast. yesterday the battery was really flat until i can slot it inside my letterbox! this morning the volt meter says 12v (like one poster mentioned also) but i didn't wanna start because if it dies again then teruk. i'll start it up when i bring it to the shop. it is now running a dry cell battery.

 

where do you folks get your wet cell yuasa? the shop i was at didn't have it.

 

also...how to maintain at 7k rpm? i don't ride the bike often...will this pose a problem?

 

if u r not riding for long good to remove wire from batt so wont lost must batt on its own..

batt will discharge power on it own when u not using it.. is juz tat it discharge very little tat u dun notice..

same goes to all or any batt.

[pranzer]

Go lailai

 

Nice Sols a 916 already

 

Well anyways correct me again if im wrong, mito is a high rpm bike so going at 5-6k rpm might cause some problems ( im not implying you should whack it real hard) it just need some exercise sometimes..

 

And you can check too at which rpm your rectifier starts charging..

[Keng Gerard]

LOL.. Yeah... the word from the King (Lailai85)

He is always my mentor for Mito. hahaha...

 

anyway back to basic*

Certainly there is a need for you to whack your RPM above 7 because it will be good for your engine in time to come. Remember, Mito is not young. Engine at this stage is @ its Wear and Tear stage. Do take more care with $$ ready wor. LOL..

 

2B Tow Truck - Need help call me. my latest Sideline.

hahaha...

[Keng Gerard]

didn't all this is u teaches me meh..

u so STM... rofl....

 

U Dun Bluff!!!!

Lame Lame..!!!

[Keng Gerard]

Cagiva Mito Friends.

I have come out with these Polo-T design.

So i need to check whether if you guys like it. then if like it, can mass Order.

 

http://i633.photobucket.com/albums/uu59/gerardtan85/MyBike/CagivaPolo-TFront.pnghttp://i633.photobucket.com/albums/uu59/gerardtan85/MyBike/CagivaPolo-TBack.png

 

Pricing not sure yet. Have to see how many ppl wanna a piece of it.

thanks.

[XYxCrOss]

I wan it !!! With my name on it !!!

[Keng Gerard]

Cagiva Mito Friends.

I have come out with these Polo-T design.

So i need to check whether if you guys like it. then if like it, can mass Order.

 

http://i633.photobucket.com/albums/uu59/gerardtan85/MyBike/CagivaPolo-TFront.pnghttp://i633.photobucket.com/albums/uu59/gerardtan85/MyBike/CagivaPolo-TBack.png

 

Pricing not sure yet. Have to see how many ppl wanna a piece of it.

thanks.

 

Need to have at least 20 then i will go with this!!

I will take my size as Role example - Me L. Then u can filter after me. Height of me, 177cm, normal build.

Name Please !!

1. Gerard

2. Xiao Yang

[scubasimon]

thanks for the advice about the battery and all that. i haven't had time to do anything with the bike for now (and for the next few days). i will most likely bring it to excel as many have recommended. how to check if rectify and coil is working? when bike is running, the volt meter shows

 

count me in on the polo shirt...hope it is made of some coolmax/dryfit material and not normal cotton?

 

btw, what is your number Keng Gerard for towing (in case i need it?). you can pm me or sms me at 98155287. thanks!

[d3athprince]

THOSE WHO WAN THE POLO TEE PLEASE ADD UR NAME AND SIZE HERE.

 

1. Gerard

2. Xiao yang

3. Samuel - XL

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

[XYxCrOss]

Gerard ah mine shld be same size as u ... LOL so shld be okay

[lailai85]

LOL.. Yeah... the word from the King (Lailai85)

He is always my mentor for Mito. hahaha...

 

anyway back to basic*

Certainly there is a need for you to whack your RPM above 7 because it will be good for your engine in time to come. Remember, Mito is not young. Engine at this stage is @ its Wear and Tear stage. Do take more care with $$ ready wor. LOL..

 

2B Tow Truck - Need help call me. my latest Sideline.

hahaha...

 

yeah all thank to keng gerard teach mi all about mito..

upppzzzz...

Edited September 23, 2009 by lailai85

[lailai85]

THOSE WHO WAN THE POLO TEE PLEASE ADD UR NAME AND SIZE HERE.

 

1. Gerard - L

2. Xiao yang - L

3. Samuel - XL

4. Ming lai - L

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

[lailai85]

THOSE WHO WAN THE POLO TEE PLEASE ADD UR NAME AND SIZE HERE.

 

1. Gerard - L

2. Xiao yang - L

3. Samuel - XL

4. Ming lai - L

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.