Jump to content
  • Join SingaporeBikes.com today! Where Singapore Bikers Unite!

    Thank you for visiting SingaporeBikes.com - the largest website in Singapore dedicated to all things related to motorcycles and biking in general.

    Join us today as a member to enjoy all the features of the website such as:

    • Forums
    • Blogs
    • Picture/Video Gallery
    • Motorcycle Clubs
    • Event Calendar
    • and many more!

    Registering is free and takes less than 30 seconds! Join us today to share information, discuss about your modifications, and ask questions about your bike in general.

    Thank you for being a part of SingaporeBikes.com!

Recommended Posts

Do you guys know where can I respray lacquer on carbon fibre parts. it's my front fender got some chip offs. those are not deep up to the carbon fibre. I need to sand down the top layer of the lacquer and respray again.

Please guide me to the right direction. tried DIY but my hands r not good enough for this job.


Link to post
Share on other sites
  • Replies 0
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Double Brotherz
      As mentioned above
      im selling my Almost new condition
      Yahama R1 2009 - 2012 Carbon Fibre Hugger
      As i'll be getting another type of fibre... Thus selling it away..
      Fits Great....
      Selling at $60.
      Contact me at 90175057
      * First Come First Served Basis...

    • By nateray
      Hi all, just sharing my experience.
      Got my hands on a cracked fairing, so thought I'll attempt a quick d.i.y.
      Since I got no repair kit, I just sent the fairing to be repaired @ a shop.
      Image below is after fiberglass resin repair (or whatever its called)

      Shop charged me $35 for their services. Quick job, collected around 3 hours after leaving it there.
      Frankly, I was a little disappointed. The finish wasn't sanded. Requested shop to use their machine
      to sand down the repair area for a smooth surface (takes under 2 mins), but shop claimed they have no equip to do so.
      Mentioned that it's the job of spray shop to putty, sand & spray.
      However, shop did it's primary job. Repair the fairing and inserted the metal linings and enforcers where needed.
      Upon closer inspection, noticed that resin was uneven with some thick blotched patches. Nothing wrong, just means that the guy could had definitely done a better job if he wanted to.
      Headed off to buy sandpaper & shiny black spray paint. Total $7.50
      In this case, no putty involved, just sand and spray on the resin.
      (rough sandpaper to wear down the unevenness, smooth sandpaper for fine finish)

      Since I only planned for a quick d.i.y, didn't bother to respray whole fairing, just the damaged area.
      This will of course end up with color tone difference, but what the heck
      Proceeded to wrap the fairing (parts I plan to leave untouched) with newspaper and masking tape.
      Remember to use marking tape to outline the spray area and make sure it's straight and aligned to what you want.

      Taping done. Next is sanding. Wanted a quick job, so no wet sanding (
      Cursed multiple times at this stage lol. The uneven finish of the repair gave me additional work.
      Also found out areas (resin) that should be thick were thin and vice versa. Again, guy could have done a better job
      if he wanted to.
      Done after 10-15mins. No pic here, but my arms were screaming so I gave up and settled for a 'semi-decent' job.
      Next stage, the fun part! Spraying!!
      Note that this is the Hardest Part!
      If you're terrible in Arts & Craft / D & T (underlined = area of expertise needed)
      Please get someone to do it for you. (I got my colleague to do it for me ha ha)
      Applied multiple layers of paint, leave it dry under sun for 10-15mins and reapplied a few more coats.

      Cont next post.

  • Create New...