ST200 Runner owner - 2009 / 2010

[bongstar88]

hi guyz...for belting and roller,how many months or how many KM nid to be change new?i'm still noob about this bike.

 

for belting, i currently using malossi kevlar. my last change was ard 12k +/-. the belt still look good and kept it for spare. I've heard original belt could last longer but tat i cannot confirm.

 

rollers ard 6k i would give a change. lighter rollers might wear faster since they go at higher rpm most of the time. i think keep the change ard there shd be safe.

 

hope tat helps a bit.

[dyno_88]

mark no point u say so bad things about other people when u dun try to clear d air for urself in the first place.

u noe who borrow ur parts rite? den ask d person who borrow for ur polini bell.dont blame the mechanic.

and no point u call ppl junior mech or senior mech.we are all learning bit by bit abt the bike so are u dat great with the bike to label a mech as junior or senior?

com'on la mark.if u really feel dat uv been wronged, go back to the shop, talk to the boss, and settle the whole issue with him.wats d point of posting it on forum? not everyone gets treated the same way as u are.always remember dis dude, the boss once helped u with alot of things and do u think its fair with watever comments ur posting on this forum? WHEN YOU ARE HIGH UP THERE, DON'T FORGET THE PEOPLE WHO WORKED HARD TO HELP YOU GET THERE.LIFE IS NOT ALL ABOUT MONEY. DON'T U THINK U'VE BACK STABBING THE SHOP OWNER BY DOING THIS? AFTER ALL THE HELP HE HAS GIVE N U? THINK BEFORE U DO SOMETHING DUDE.

 

P.S i am not siding anybody.so my advice to u is, go back to the shop and settle the things with the owner first.no use defaming someone on the forum.unless he chooses not to settle it with u then its a different story.and btw the shop owner said it clearly to me to ask u to go to the shop to settle things with him.not go around spread bad words of others.period.

 

The problem is, time after time, once and again and many times i've went back and asked for what that belong to me and nothing has been done! Only i myself will understand what happened and im just here to share my experience..why would i wanna lie about it in the first place?

[dyno_88]

To dyno_88:

 

Dont take things for granted la bro.....remember those who helped when you had nuthin. Friends to have fun with are easy to find. Theyre all around. But those who were around and helped when u werent doin so good, are rare. Appreciate them. I'm not siding anyone coz I dont know the real facts myself. Which I think you dont too. Like they said, keep this between you and that mech and workshop. They could do the same to you if they wanted. Think wisely before saying or doing anything.

 

I have thought really nicely and i appreciate alot of friends out there who had been helping me out. But to my dissapointment, i want you guys to understand that i won't be flaming someone for no reason and because of the fact that i've treated him so well and did him so many favours. It's a dissapointment that when i wanted to resolve this matter in the shop. He still didn't want to take the blame for what that happened. Good friends are not easy to find and i know who treated me well and who doesn't....But because i'm so ****ing frustrated and furious over his integrity.....this is the result i am going to give it to him to face his own music.

[dyno_88]

HAHAHA.. HEY Mark kengkang stoner, im not siding anybody either u or the junior/senior mechanic..

Remember this Pal, once u have ur ride, and the day when we 1st get to noe u at Kallang KFC, u ask Aris for the Trupaz tshirt?

 

Start from scratch, u do not noe anitin of scooter parts, wat pple have in our ride or fixed, u gonna die die wans it 2.. and boast to others that it had been fixed in ur ride..

The boss and the mechanics have been helping u since day 1 when u starts servicing ur ride.. They helps u and willing to give u by paying installment plan. Thats mean they trusted u.

Now u wanna boast to all in this bike forum that the bike shop or the mechanic was so fuct up.. Think twice before u take any action.

 

Y dun u wanna boast that u r enlisted NS but u are on long MC leave..

Y dun u wanna boast that when u r on MC leave, u work as a despatch rider.. Isnt that wrong while ure enlisted..

Y dun u wanna boast that u r entitle to stay home when ure on MC.

Y dun u wANNA boast to ur parents that u lied to them about the accident in Tuas track..Wat? in camp accident.. WAT A SON!.. scared that ur mum nag at u..

Many pple have been complainin about u, and we hide it. From shopowners, Auntie shop Anita, and many more.

 

Think as an adult bro.. Dun tink like an action hero..

 

Once again, appreciate to the boss and the mechanics helps u from zero to be kengkang stoner.

Frankly, i love ur bike bro.. but sadly the owner have a dumbA55 Brain.

 

Answer me this question before you tell me that i'm acting like a hero. Would you be so dumb until you don't even know what is in your bike?

 

Secondly, when you have spoken to the shop countless of times regarding about this issue and nothing has been done, what will you do?

 

Thirdly, Yes, the shop owner treated you well enough to get you what you need, but your bike wasn't 100% tip top when you receive it back, will you still be happy?

 

Fourthly, Although it's not the shop owners fault, but if the mechanic is employed by the shop owner. Whose fault will it be after all?

 

Please do not bring up the issue ever since i had my accident and whatsoever in regards to my mom. Because as a son, i do not want my parents to worry and i am old enough to be responsible for whatever that has happened in the track because IT WAS MY CHOICE.

 

Seriously go and ask around in the group and see how many people will entrust him with their bikes. Do you think i will do this brainlessly for the sake of a clutch bell!? TIME AND TIME AGAIN, IT'S HIS ****IN INTEGRITY THAT let plenty of people scared to come to the shop.

 

And i don't think my MC leave or whatever crap is related to this topic. To be frank with you bro... i REALLY KNOW WHO TREATS ME WELL AND WHO DON'T.

[dyno_88]

i second ur opinion sham! not siding anyone but to me if ur truthful to someone ppl will be nice to u.no point boasting abt the little knowledge that u have an act like ur one scooter master.wake up dood! this is not playskool where u complain to teacher abt wat happen to u.find the correct avenue to lodge ur unhappiness.not in a forum! don't think ur part of da club, we the rest will support ur actions.i am a no one in da club but i seriously feel ur complains are just rantings from a little kiddo who thinks he has grown up.THINK BEFORE YOU ACT!

 

.:scooter tuning is a passion:.

 

I understand where you are coming from and i want you guys to understand that i'm not asking for any sympathy from this thread but rather to share my experience on what happened. And of course, this is not the place where i will get the rest to support my actions but rather to me is to grieve my anger and let others be wary of the kind of situation i've been through.

 

I admit, my delivery of words in the forum might sound quite tough on some people and i take it that it's my fault because it wasn't the right tone that some had receieved.

 

But come to think about it, is there any other ways to resolve this matter when it was already remained unsolved? When you or no one can't pursue this matter anymore, what other solutions will you think of? You know me well, i am not unreasonable to some extend. But when things start to screw up until i have to keep chasing for my bike and make sure everything is there when it's not. This kind of things will bound to happen.

 

My motive is not to flame the shop owner....if i wanted to, i could've indicated the shop name. So please understand.

[dyno_88]

So wats next mark? advert it on papers? U can BOAST there? but again, for wat ever reason? personally, i dont think an adult would do such a thing. Post something openly so others would pity u. Think lads, think

 

If you think i'm asking for sympathy, YOU are totally wrong. That is not my motive. =) I do not care who your siding but to my own perspective, i will not spare the ****ing rod.

[east76]

for belting, i currently using malossi kevlar. my last change was ard 12k +/-. the belt still look good and kept it for spare. I've heard original belt could last longer but tat i cannot confirm.

 

rollers ard 6k i would give a change. lighter rollers might wear faster since they go at higher rpm most of the time. i think keep the change ard there shd be safe.

 

hope tat helps a bit.

 

 

thx bongstar88..btw how much e malossi kelvar price now??.i heard tat roller,there is a grams size izit correct and which size are better use?

[Suede]

for belting, i currently using malossi kevlar. my last change was ard 12k +/-. the belt still look good and kept it for spare. I've heard original belt could last longer but tat i cannot confirm.

 

rollers ard 6k i would give a change. lighter rollers might wear faster since they go at higher rpm most of the time. i think keep the change ard there shd be safe.

 

hope tat helps a bit.

 

bongstar can i ask something? Is it ok if i dun want to change roller? (u indicate that rollers should be change around 6k) I intend to do all at 1 shot full service at around 10 to 11 thousand km. no harm right? Thanx in advance!!! \m/

[bongstar88]

belt price ard 100+ , closer to the 100 tho. i'm using 12.5. i'm used to it already lah so u shd try urself which suits u best. i think the range ard 10.5 to 15grms.

 

well suede, harm or not i can't confirm lah, since tats always my practice.. juz tat the rollers tend to be out of shape ard tat period. and bcoz of tat u won't get ur usual pick up/distance bcoz of tat. and oso i using aftermarket variator. so yah. tats my practice and i believe quite a no of ppl follow tat schedule too. anyway gd luck!

[Suede]

belt price ard 100+ , closer to the 100 tho. i'm using 12.5. i'm used to it already lah so u shd try urself which suits u best. i think the range ard 10.5 to 15grms.

 

well suede, harm or not i can't confirm lah, since tats always my practice.. juz tat the rollers tend to be out of shape ard tat period. and bcoz of tat u won't get ur usual pick up/distance bcoz of tat. and oso i using aftermarket variator. so yah. tats my practice and i believe quite a no of ppl follow tat schedule too. anyway gd luck!

 

 

Ya ur rite. Nvm i just wait for full service then... hehehe.... tahan sikit la sampai around 11k km. After that i will follow accordingly to ur advice.

 

Phhheeeewwwwwiiittttttttttt~~~

[nicky69hayden]

thx bongstar88..btw how much e malossi kelvar price now??.i heard tat roller,there is a grams size izit correct and which size are better use?

 

bongstar can i ask something? Is it ok if i dun want to change roller? (u indicate that rollers should be change around 6k) I intend to do all at 1 shot full service at around 10 to 11 thousand km. no harm right? Thanx in advance!!! \m/

 

belt price ard 100+ , closer to the 100 tho. i'm using 12.5. i'm used to it already lah so u shd try urself which suits u best. i think the range ard 10.5 to 15grms.

 

well suede, harm or not i can't confirm lah, since tats always my practice.. juz tat the rollers tend to be out of shape ard tat period. and bcoz of tat u won't get ur usual pick up/distance bcoz of tat. and oso i using aftermarket variator. so yah. tats my practice and i believe quite a no of ppl follow tat schedule too. anyway gd luck!

 

 

a lot of terms which i kinda not understand

 

Anyone here noes of a website that I can visit, which has some grafix and diagrams that can show me the different parts of the scooter drive system.

Its juz for better understanding n also maybe i could D.I.Y some stuff, thanx

[scOOtard12]

The problem is, time after time, once and again and many times i've went back and asked for what that belong to me and nothing has been done! Only i myself will understand what happened and im just here to share my experience..why would i wanna lie about it in the first place?

 

I have thought really nicely and i appreciate alot of friends out there who had been helping me out. But to my dissapointment, i want you guys to understand that i won't be flaming someone for no reason and because of the fact that i've treated him so well and did him so many favours. It's a dissapointment that when i wanted to resolve this matter in the shop. He still didn't want to take the blame for what that happened. Good friends are not easy to find and i know who treated me well and who doesn't....But because i'm so ****ing frustrated and furious over his integrity.....this is the result i am going to give it to him to face his own music.

 

I understand where you are coming from and i want you guys to understand that i'm not asking for any sympathy from this thread but rather to share my experience on what happened. And of course, this is not the place where i will get the rest to support my actions but rather to me is to grieve my anger and let others be wary of the kind of situation i've been through.

 

I admit, my delivery of words in the forum might sound quite tough on some people and i take it that it's my fault because it wasn't the right tone that some had receieved.

 

But come to think about it, is there any other ways to resolve this matter when it was already remained unsolved? When you or no one can't pursue this matter anymore, what other solutions will you think of? You know me well, i am not unreasonable to some extend. But when things start to screw up until i have to keep chasing for my bike and make sure everything is there when it's not. This kind of things will bound to happen.

 

My motive is not to flame the shop owner....if i wanted to, i could've indicated the shop name. So please understand.

 

how about you start solving things on ur end? u clear ur debt with him and then settle all the things nicely.. i think the reason ur parts are being held back is due to u not settling ur debt with him.btwn u and the mech its an outside matter.don't bring the shop into the issue.throughout my experience with the shop yes there are times where the bike is not in tip top condition but then again to me its up to u to return to the shop to get things properly tuned.and abt the bell issue,how would even noe it was the mech who swapped ur item? and when the mech offered a new bell why u reject his offer? why talk abt his integrity when u dont think about urs in the first place? who are u to judge others? if u have integrity u wont even flame abt others in a public forum.u'll juz settle things on ur own and not make such a big issue of a small thing.to me these issues are trivial and personal issues dat doesnt need to be posted on a forum..

[Suede]

Peace no war \m/

[JiggyJig]

a lot of terms which i kinda not understand

 

Anyone here noes of a website that I can visit, which has some grafix and diagrams that can show me the different parts of the scooter drive system.

Its juz for better understanding n also maybe i could D.I.Y some stuff, thanx

 

you bike owner's manual..

very useful..

[bongstar88]

for diy of the transmission u need an impact wrench to open it up easier and for tat u need a compressor to make the impact wrench work. i'm not sure if u can use it with juz normal tools to open it as i tried, it doesn't turn out tat good.

[G-Force]

for diy of the transmission u need an impact wrench to open it up easier and for tat u need a compressor to make the impact wrench work. i'm not sure if u can use it with juz normal tools to open it as i tried, it doesn't turn out tat good.

 

My advice..better not try to open the transmission cover by DIY..unless u have a compressor & the correct tools to do the job...

[bongstar88]

hey wan!!!!! bila nak lompat2 ni? hahahaha!

[G-Force]

hey wan!!!!! bila nak lompat2 ni? hahahaha!

 

takan aku nak gi lompat2 ngan giley kan...

[dyno_88]

how about you start solving things on ur end? u clear ur debt with him and then settle all the things nicely.. i think the reason ur parts are being held back is due to u not settling ur debt with him.btwn u and the mech its an outside matter.don't bring the shop into the issue.throughout my experience with the shop yes there are times where the bike is not in tip top condition but then again to me its up to u to return to the shop to get things properly tuned.and abt the bell issue,how would even noe it was the mech who swapped ur item? and when the mech offered a new bell why u reject his offer? why talk abt his integrity when u dont think about urs in the first place? who are u to judge others? if u have integrity u wont even flame abt others in a public forum.u'll juz settle things on ur own and not make such a big issue of a small thing.to me these issues are trivial and personal issues dat doesnt need to be posted on a forum..

 

I am acting as a customer and this is my feedback. I have repeatedly asked for my things after my first payment was CLEARED and still i didn't got back my things. And i am extremely sure that the bell belongs to me because i KNOW exactly what i have in my bike. I won't be so dumb to post something like when i'm not even sure what is inside my bike. I do not know what integrity actually means to you. But i cannot accept dishonesty. =) Whatever it is, and whatever i posted, it's up to the public to accept. And i gurantee you that one day, i'm gonna nail him down and make sure he loses his reputation. And i'm sure of that.

[mamaboy14]

hey everyone, just got my st200, anything tips for maintaining the bike?

[JiggyJig]

g-force, your bike mxpx themed?

[mohdfhaizal]

hey runner lovers, can you tell me which bike shop offers the best price for a new ST200?

[romeo69]

hey runner lovers, can you tell me which bike shop offers the best price for a new ST200?

 

try a.s. phoon or bike production...

[ayam1987]

try a.s. phoon or bike production...

 

for bike production pls be prepared for their outstanding customer service...

heee....

 

happy hunting!!!

[ayam1987]

jiggy,

 

wanna go jb tmr... but i need a ride uh... cos my bike haven collect yet...

how can? if can what time u wanna go in?